Reviews
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUBC125
I purchased this product because I have small hands and Brake lever puts a lot of pressure on my fingers when I grip it.
[How is it used?
I bought a CT110 HUNTER CUB this time, but my fingers hurt when I hold the RightBrake lever.
Maybe it's just me, but my middle finger is a little deformed after many years of use, so it inevitably causes pain when I use it.
So we decided to use this product made by Kanaya, which we have been replacing since the CB era.
Was the one you received as per Image?
Yes, it meets my expectations, it matches the color of my Motorcycle and looks great!
It was just like the plane.
Was the installation difficult?
The OEM lever is removed for installation, but the mounting bolt is not fully removed and the head is stuck in the accelerator wire.
It was difficult to pull it out because it got stuck. After that, once it was removed, it was just a matter of soaking it in, but it was a little difficult.
It took a while, but it was done!
How was your experience with it?
It is easy to use because the user only needs to adjust the position that fits his/her own medical needs with 6 levels of adjustment.
[Included Parts:were they on?
Included Parts:was only Lever, so I didn't have to buy aTouch separately like before, which was a big help!
[Was there anything that disappointed you?
I have no problem with the product itself, but it would look better if the mounting part was the same color.
Other items that would be helpful
If possible, lever should also be installed on the holder side (if it is greased up at the bolt).
I think it's a good idea... If you don't have BrakeGrease, you need to add it (apply it) ?Even if it's just a little bit of s
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The installation point may be a bit tricky to remove the mounting bolt, but you should be careful not to bend the Accelerator Wire part.
as a request
As I mentioned before, a little grease on the lever itself, or a small amount of tube attached to it, would be nice.
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA YZF-R6
The texture is lovely.
Used in 2008 YZr-R1.
Simultaneous replacement of Grip and Bar End.
If you install it as it is, there is a large gap between the end of the grip and the end of the bar, which is not a good parenthesis. Well, there are many motor cycles like that.
It is not enough to just attach a pontoon.
This kind of thing can be done neatly by modifying and adjusting it to suit the motorcycle.
The spacer was kindly included in the kit, so we shaved off about 4mm of the gap and adjusted it to 1mm on the Throttle side.
This is a consideration that the manufacturer has gone to the trouble of creating a high quality product, so it should have a good parenthesis.
View detail
It is a good product
I installed it on my SR400. It is a good product, and the fact that it is Japanese Vehicle Inspection Correspondence is a high point. View detail
I failed.
When replacing the master cylinder, the stock switch box would give me more room for the gas pedal wire.
I bought it The wire is 800mm, and the inner pipe is 44mm without thinking.
This is the source of the mistake. There's no point in making it so high throttle in the first place.
I put it on and it's really high throttle, sweaty, and the gas pedal is really heavy. ・・・・
The wire also seemed a little long ・・・・
I think the balance with Rajpon is great, but maybe this time I made a mistake in choosing the right parts.
It's not an improvement, it's a deterioration.
I'd like to try it next time with a 35mm throttle and 700mm wire.
View detail
Connector needs to be replaced
Purchased due to the change of gas pedal holder, the normal switch box changes the position of the lever.
It's just the right thickness, isn't it?
But if you want to put it on CB250R, you need to change the connector.
Wiring purchased and installed a set of connectors that fit the brake, kill and starter CB250R.
No problems with functionality.
View detail
Weight reduction around handlebar
I have always enjoyed forest road touring with gasgas EC250 as a hobby.
It is an application that sometimes runs a little HARD.
Until now, I have been using ZETA's Guard with Aluminum in it,
The Handlebar end of the Motorcycle, the furthest end of the Motorcycle, is extremely heavy, and with the worsening of the Handleling,
I was struggling with the weight of the Motorcycle when I knocked it down.
Also, the fat bar's bend also became a snap, and for a long time we were troubled with the selection of a hand guard.
To be honest, this hand guard works. However, it can be easily fixed by hand, so I am not particularly dissatisfied with it.
Since it is not made of aluminum, it is very lightweight. The lever protection is also very good, and so far it has protected me well.
Total performance is very good. It seems to be my ideal Hand guard.
I would like to test how far it will endure while actually using it, since it is plastic in nature.
By the way, although it is Plastic, it is surprisingly sturdy.
View detail
A bit pricey.
With bar ends made entirely of gold, the basic rule is to replace the bar end when it falls over, but in this case, only the resin part can be replaced, so there is no need to buy a new one if it is just a standing bump.
However, the replacement of the resin part is a bit Large strange.
View detail
Bar end mirror for option719
The handlebar width is very narrow and the position is very comfortable. If you are used to NORMAL, it will take some time to get used to the low speed operation. But it is easy because it is made of aluminum.
The brake hose interferes with the meter, so the mounting position is usually fixed, but it is a good product.
View detail
The texture and feel are both good.
[How is it used?
Because the OEMLever of the GSX-S 125 is not adjustable, and also to Upgrade its appearance.
We compared it to Endurance's Lever, but this one seemed to be more to our liking in terms of lever shape, length, etc., so we went with this one.
Was the one you received as per Image?
The texture is as good as the picture shown.
Was the installation difficult?
No problem.
How was your experience with it?
The adjustable type is easier to adjust to the position of your choice, and it also feels better when you run.
[Included Parts:were they on?
I think it came with a ManufacturerLogo sticker.
[Was there anything that disappointed you?
Nothing in particular. I dare say that the Retractable Lever was so loose that it moved immediately after arrival that I had to retighten the nut to prevent it from moving.
Blue Anodized is a little lighter than U-KANAYA's Blue, etc. I think it fits GSX-S125's Birdton Blue. (The Normal Holder has a large amount of play, so it may rattle a little, but I think that can't be helped. If you are worried about the rattling, it would be better to replace the MASTERBODY with Landor or brembo.
View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
Lightweight bar ends from KIJIMA
Lightweight bar ends from KIJIMA, ideal to save some weight while still maintaining some vibration damping efects. Can be use on both the stock steel handlebars or aftermarket aluminium ones, as it cames with both adapters type and the Allen tool also. Overall a good quality/price product. View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
It looks cool and is even easier to operate!
Clutch, Brake and Quantity:I appreciate the price for the Set.
Installation is easy and quick.
The texture is good and it is easy to dress-up.
The distance to Lever is shorter than OEM, making it easier to grip and operate.
View detail
Fits: YAMAHA SR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GOOSE250, SUZUKI GOOSE350, SUZUKI BANDIT600 (GSF600), SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI INAZUMA750(GSX750), YAMAHA FZS1000 FAZER, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
Cool & lightweight
The Gold is not too assertive and the texture is perfect.
I am satisfied with the lighter weight compared to the OEM.
View detail
It's crisp and clean.
This is a change from OEM.
The installation can be done without too much difficulty if you have experience in such work as replacing the clutch lever, since there is a translation (please enter hereManual).
Also, while installing it, I felt that the accuracy of the cutting process may vary a bit, and you may be dissatisfied with the Quick Adjuster for Red and Blue. The color will deteriorate under ultraviolet light while in use, and the color will fade, but if you are considering purchasing these as Custom, please be aware of this.
Grease is also applied to the bolt that fixes the lever from the beginning, and the handlebar is fixed with a clamp system, and the screw is very precise, so it was installed comfortably.
The clamp that fixes the handlebar is a little hard plastic material, so there is a possibility that the entire clamp may rotate when it falls over. If you are concerned about it, you may want to change to RubberMaterial.
As for the feel of the operation, as per the Title, it is snappy and sharp.
If you want a direct feel from it, I think you can further modify the Sleeve in the Thailandico fixation area.
Even with the Sleeve position in its normal state, the OEMLever comparison is better, so I felt that the Point is a point of preference depending on how a person uses Clutch.
I wish I had not been stingy and purchased it earlier, as it is one of the other Items that can be fine-tuned for Lever position.
View detail
Used for RADIPON MASTER
I purchased this product to install a Guard made by another company.
The handlebar is very well made, and the handlebar is fixed with 4 screws, so even if it loosens a little, it is not likely to become defective immediately.
This time I installed it on a Fat bar and was able to install it without any problems.
I put it on as it says RightLeft on the product, but there seemed to be no difference in the shape.
I would like to see if it is sturdy enough, since I think this kind of thing plays a stronger role in resisting impact by rotating rather than guarding against falls.
View detail
To avoid breaking the Lever
I installed it to enjoy Motorcycle in various Situations in the future.
Installation, etc., is not a problem at all, as it is often seen in videos, etc.
However, if you need to open the throttle cone and want to process it nicely, you need to have tools.
I think it is easy to work with.
After installation, the motorcycle looks tighter and I am satisfied.
I don't want to feel the effects as much as possible, but it has become a talisman.
View detail
Fits: KAWASAKI Z900RS cafe, KAWASAKI Z900RS, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Vibration? It might be better.
[How is it used?
Touring use from mountain to city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
The work is easy. But I don't know which way to put the groove on the outside or which way to put it in!
How was your experience with it?
I feel fine vibration....like Large vibration to Small vibration?
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The OEM Screw is Black, and this Screw is Silver color, which is a bit cheap w
It's cheap, that's what it is.
View detail
Good to have a variety of colors to choose from.
This one is good because it offers a variety of Coloring choices.
Both Cx and sx bars come with Pad as standard, but the Black is Quantity related to the color of the bar.:Set
Inevitably, every time you buy a bar, Black's Bar pad will accumulate in droves! 。
There is almost no profit to be made selling them on Mercari or Yahoo!
I would like to be able to choose the color of the Pad anyway, but I think it would be better if the Pad is treated as an Option like the comp bar and the unit cost of the Handlebar is lowered.
View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KLX250, Others , YAMAHA WR250R, YAMAHA WR250X
There are some good things that only a comp bar can do.
I put a MOTARDMedium comp bar on my CRF250RLY50.
I had worn cx bar mx-123Blue before, but I thought it would be more comfortable with a little more aperture in terms of position. I decided that the comp bar would fit CRF250RLY50, which is not so strong and rigid, and bought it.
As a result Large was the right answer
The position, moderate rigidity of the handlebar, and coloring are perfect.
View detail