Reviews
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Cool with good color
Easy to install, easy to grip and firm compared to OEMLever. The result is better than the price. View detail
It doesn't fit.
I applied it to Tank and it didn't fit.
Returned immediately.
View detail
circling a large number of insects
This is fine as it works without any problems! View detail
Shift knob
I use it for Shift knobCover of my car, AXIS Ti mini-truck. View detail
It doesn't make it a pontoon in the first place.
I had checked the 8BK-md47 many times with the staff before purchasing it to make sure it was really large and sturdy, but it was not easy to install as there was quite a bit of modification required.
Also, the design of the Silencer in the product image is different, and it is a mystery why this is not checked and changed every time.
First of all, the fixed bolt hole of the middle pipe is 20mm gapped to the Right when viewed from the front, a position that cannot be corrected by compensation.
The Silencer is not fixed to the fixed bolt hole because it interferes with the RightBlinker on the Rear, so I bought a Bracket and modified it to fit with the Bracket. The exhaust port is directly behind the License Plate, so it's really lame.
Why put a Manufacturer's product on the list that does not seem to conform?
And after confirming it many times, why did they respond as OK?
I don't know if the Staff here is too ignorant or appropriate, but I guess it is a company that can't help itself.
View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
I highly recommend it because it is not too dark!
"Green Light" I purchased Mirror!
There are other options for color variations, so you can choose the one you like best. The installation was easy:just remove the Shield from the Helmet and fix it to the Pin lock, so anyone can do it, and there is no need to buy an additional Shield. Moreover, the price is low compared to the cost of buying an additional ShieldBody.
I was surprised at the anti-fogging effect when I actually used it.The color of the Green mirror is SMART, you can just barely see your face inside the Helmet, but from the inside it has a Gray tint. It is like wearing thin Sunglasses.
It allows you to concentrate on driving during the day and also blocks reflected light. However, it sometimes felt a little dark when driving in Tunnel or at night, but it was not a hindrance.
View detail
I think it's practical.
I had been using a helmet holder that attaches to the Back Mirror, but it was a little inconvenient to use, so I was looking for something else.
I chose it because it is Dial lock and because it is fixed with Wire.
Installation on the Handlebar is easy, but using one Spacer interferes with the Back Mirror and Wire, so I used two of each to hold them in place.
There are many gaps when viewed from the side, but the gaps are necessary for Wire winding.
The only point of concern is that the Dial is a little hard to turn in Small, so it is difficult to use with gloves on.
View detail
hmm
I'd bought the CB250R before because I'd heard it had a bad footprint.
I'm going to put it on.
Quality is good, almost OEM Product quality.
Almost indistinguishable from an OEM sheet.
The seat feels a little thinner, and the corners of the seat have been removed.
However, I don't think we should expect a Large width footprint improvement with this seat.
It's just a little bit. It's just a little bit. I feel like I have better footing.
View detail
Cool, but ….
The product is good, but I wish you had included a picture of the current MODEL because the embroidery on the back of the item was missing from the picture in the description and the item I received.
I was fooled because I bought it thinking it would have embroidery on the back of the head, but the current MODEL has lost the embroidery.
Please upload accurate information.
View detail
Very beautiful Red
I like the design and practicality.
It can reduce finger pinching in the event of a fall.
View detail
Quickshifter = Super!
Fast delivery within 1 week. VAT still has to be paid to DHL (in my case 37.62€). Product from Honda as described. Price/performance = unbeatable.
Quickshifter = "game changer" GREAT! ---------------------------------------------------------- Fast delivery within 1 week. You still have to pay VAT to DHL (for me it was €37.62). Honda product as described. Price/performance = unbeatable. Quickshifter = "game changer" GREAT! Powered by Google Translate
View detail
Fits: KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI RM250, SUZUKI DR200, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA FTR250, HONDA CRF250R, HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: SUZUKI GSX750, SUZUKI GSX750 , SUZUKI GSX750 , SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANA SPEEDO NEEDLES
I recieved the Katana speedo needles quicker than expected and it arrived in a well protected package. Once I get some free time I will install them. I was so impressed with the service that I did not hesitate to order another product. Thanks! JOHNNY "B" KATANA View detail
Genuine Furygan James D30 summer gloves
I recently purchased a new set of winter gloves by Furygan for both my wife and myself. As the summer season is upcoming, I decided it was time to buy a new set for this season as the old ones were past their best. I went for the Furygan James D30 ones as I have had a few Furygan branded gloves before and found them to be exceptional in both quality and fit. These gloves were just one of 2 sets I was looking at purchasing but went for this style as they would fit well with my current outfit. They were pretty good value for what you get. The leather is really supple but not thin in any way. You can tell the quality when you put them on. None of the stitching was in the way of the movement of the gloves and was well made in every way. There is a nice gaitor area on the wrist which helps with expansion and there is also a zip closure with velro to boot. Very happy with these gloves and I await the nice weather so I can wear them. View detail
Genuine Furygan Lady Astral D30 summer gloves
My wife also needed a new set of gloves as hers were not the best of conditions with the years she has had them. She asked for a new pair of Furygan and specifically this style. The older ones were not too different to this style, Astral D30 and by the look of them, these are a small upgrade from her old ones anyway. The sizing is pretty much accurate and the price of these was really good too. I do like it whem I can buy both my wife's and my own gloves from the same place. It just makes life easier. The gloves all arrived well packaged. These Astral D30 are a short cuff style with a single velco fastening on the the inside of the wrist. They are leather and have a really neat design which my wife just loves. The leather is of top quality and very supple but feels like they could take a good amount of abrasion. Very happy with this purchase and so is the wife. Thanks Webike. View detail
Fits: SUZUKI High UP R, SUZUKI high up, SUZUKI SEPIA ZZ, SUZUKI Address Tune, SUZUKI SEPIA, SUZUKI AddressWAY, SUZUKI ADDRESS V50Tune, SUZUKI ADDRESS V50, SUZUKI ADDRESS V100, SUZUKI Address EX, SUZUKI Address
The best clutch
very cool quality ordered on March 29, arrived on April 8, installed them immediately, happy with the result, I will order more View detail
Recommendation for beginners!
This is the first time I have installed it myself. It took me about 2 to 2.5 hours. All the manufacturers did not have much in stock, and I wanted to install it right away, so I chose this product, which was in stock. I am satisfied with the appearance of the product, as I installed it just for its looks. The best thing about this Striker is that it can be installed in the same position as the OEM footpeg with 0mm height and 0mm back. I can adjust and shift it as much as I need. The probability of regretting the position after buying the Striker is reduced significantly! I think this will greatly reduce the probability of regretting how tight the position is after you buy the product. Also, I wish the Instruction Manual was more detailed. It is just a Parts List. It is more reasonable than anything else, and is a good recommendation for beginners! View detail
Performance commensurate with price
Installation was completed in less than an hour and Gasket is included.
It is the same as OEM at startup, but you can feel the power coming out of the mid-range RPMs.
Also, the OEM exhaust system has a grainy sound starting at around 60 km/h, but this one has a solid single-cylinder thumping sound that is enjoyable to ride.
It is expensive, but I think it was worth it and effective.
View detail
In case of emergency!
I have just installed it on my other GSXR because I got knocked off my feet on my Harley about 6 months ago. I haven't actually fallen yet, but it is still a good insurance policy. I think it would be better if it had a little more protrusion. The side cowl was a little too large, but Babyface is very accurate and I was able to install it without any problems! View detail
I think it's a little too Large.
The Cowl is easy to install because there is no modification, it is cheap to work with, and it is very helpful for the Large size change. View detail