Reviews
Think of it as a good luck charm.
If you fall over and repair or replace Cowl or Leveretc. it may not be worth 20,000 to 30,000.
I am Touring is Main, but when I took delivery of my current 10R, I decided to put it on as a good luck charm.
With 10R, it is easy to work without removing the cowl.
Since it is a Slider, it may seem poor in the event of a fall compared to the Guard, but with or without it, there is a difference in the sense of security.
Also, it looks cool.
View detail
Slider
I was told that it is better to fix it to the Engine than to attach it to the Frame.
I purchased it. I don't know how well it performs because I haven't mocked it up yet.
Installation is easy (The process of removing Cowl is troublesome.)
I think it looks good Parenthesis well.
View detail
TricksterFrame Slider
I love the 3-piece set.
Trickster
Frame Slider、Front Axle Slider、
TricksterLever GuardQuantity:Set Kawasakifor VehicleGreen Light
I am satisfied with Large change
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400
Quantity:Pair (for Left and Right) The Plate of the two is connected and has shock dispersing power.
[How is it used?
For protection of Engine and Cowl in the event of a fall
Was the installation difficult?
The Instruction Manual was easy to read because it was very detailed, but the Cowl had to be removed first, so you need to study the Service Manual etc. to remove the Cowl.
Since it is an engine mount, it is better to keep the torque and use the screw lock agent.
How was your experience with it?
Quantity:Pair (for Left and Right) It is not a frame but an engine mount.
Because it is attached to the lower part of the car body, it is excellent in the aspect of the protection of the engine, but in the aspect of the protection of the cowl, I think that Slider of the type that attaches a little higher is better. In this product, the most protruding part of the Side cowl may hit the ground, so it may be damaged a little.
It is more of an engine slider than a frame slider.
[Included Parts:were they on?
It came with everything. No scratches, good quality.
[Was there anything that disappointed you?
Plate of Right Side is easy to be distorted by the problem of Mount position of Slider.
Quantity:Pair (for Left and Right) There seems to be a difference in durability in
[Opinions and requests to Manufacturer
Not only Slider, but TRICKSTER doesn't sell repair parts in detail, so it is expensive to repair. It will be helpful if you can sell it by the unit of Parts a little more.
View detail
The Bracket on the Right Side interferes with the Cowl a little.
The price is high because of the Bracket, but the installation is safe because of Exclusive Design.
As the title says, there is some interference with Cowl, but not enough to cut Cowl.
Installation is personally more troublesome than Cowl removal.
However, the mounting bolts are all hexagonal, so it is difficult to tighten the torque when they are short.
I also need a 10mm hexagon, and I bought a thicker Quantity at 100 yen a long time ago.:Utilizing the Set, I was able to tighten it enough by engaging the Ratchet Extension that I had on hand to gain length.
The Bolt of NORMAL to be removed is a common Quantity, such as 14mm or 10mm in Socket wrench.:All Size included in the Set
The 14mm Engine Mounting Bolt is hard, but with a longer wrench there is plenty of room.
Maybe this is Quantity:It might be tough to be short on Set products.
In general, I don't think you'll have any trouble installing it if you have a good set of tools.
View detail
I haven't been taken care of yet, and I don't want to be.
[How is it used?
I haven't used it since I installed it.
I don't want to.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy
How was your experience with it?
I haven't installed and used it yet.
[Included Parts:were they on?
I was lucky.
[Was there anything that disappointed you?
The handling instruction manual was a little confusing.
View detail
Looks very durable.
My buddy had an Over Racing Frame Slider and it broke when he crashed, so I went with this one.
Looks durable!
View detail
Parts you wouldn't want to use if you could!
I put it on for insurance, which I wish was there to protect Cowl from standing moss, etc.
Formally, I'm happy with it because it's not too assertive.
Hopefully we won't be indebted to this Partz.
View detail
I've never been able to help again …
The texture and installation are both good
Since the tightening torque has been specified
It is recommended that you purchase the Torque wrench at the same time
View detail
Expected
I think this is a general Frame Slider I haven't compared it to other products, but I think the texture is quite good .. It was very easy to install without removing the Cowl View detail
very good
It took me about half an hour to install this. The fit is completely original, which is great. In the case of low-speed dumping, it has a certain protective effect on the body, but! Installing this thing will deform the frame in the event of a high-speed crash. As for the installation, it is still not installed... Anyway, I installed it. I wish you all good care of your right hand and happy riding. It took me about half an hour to install this, completely original fit, which is great. In the case of low speed dumping, it has a certain protective effect on the body, but! This stuff is used to deform the frame in the case of a high-speed crash. As for the installation or not, I installed it anyway. I wish you all a good hand and happy ride. translated by Google Translator View detail
For a moment's sake
There are only firms that are making Race activities as well as making new products and feeling texture. 14 year type zx10r is Cowletc. There is no need to remove it, Quantity : Pair (for Left and Right) It is easy because it can be installed simply by removing the Engine mount bolt. The instruction manual also has pictures and is polite. View detail
I do not know because I do not use it
I do not know because it is not overturned, but from the front and back I feel that the Cover angle is well calculated. I do not like this stuff so much, but it's a measure against standing. I do not need it if I care about the appearance. View detail
I do not use it
I do not know because it is not overturned, but from the front and back angle, I feel that it is being calculated with a good angle rather than Small too small Large. If it is worrisome, it is not necessary to lack it. View detail
Correction of previous imp.
I wrote that it was impossible to install without closing the exterior side of Radiator last time, but as long as the exterior was bent by hand, the installation itself was completed.
Just Quantity : Pair (for Left and Right) As both will remain in contact with the Slider, the use is the accident responsibility.
View detail
You can not install it unless you cut the exterior in the 2017 model.
Product description does not include the model year of the fitting MODEL, there is no description of processing, I misunderstood to attach with no processing. Sorry to say that things are good. This Manufacturer also has a 2017 model Demonstration car and an Exhaust System is also under development, so probably you know that. View detail
very good.
Although it was Ninja in 2015, the installation of this product was easy to understand and easy. However, desorption of Cowl changed Large, but what was done successfully. View detail
Easy installation
Purchase this by being longer than Babyface.
Since wage is taken with Cowl peeling etc, I installed it myself.
I was worried to hear that I had to remove Engine mount bolt, but there was no problem in removing one by one.
I am satisfied with no interference with Cowl.
View detail
[ -- the Webike Monitor ] -- it thought that the thing and price which your evaluation had were handy although it wavered variously, and purchased. I do not want not to know the engine performance, unless it actually experiences, but to be indebted
[ -- the Webike Monitor ]
-- it thought that the thing and price which your evaluation had were handy although it wavered variously, and purchased.
I do not want not to know the engine performance, unless it actually experiences, but to be indebted as you are told.
I think the charm.
View detail
[Webike Monitor] The Impression of the direction besides was read and purchased. Since it has not fallen, the degree of an effect is unknown, but the effect of the existing grade is likely to be expectable from elaboration condition. They
[Webike Monitor] The Impression of the direction besides
was read and purchased.
Since it has not
fallen, the degree of an effect is unknown, but the effect of the existing grade is likely to be expectable from elaboration condition.
They are
, however a thing which does not want to be indebted if it can do.
View detail