Reviews
Lever Lock
Purchased for simple parking.
I thought it would be better to Appeal with a color that stands out, so I went with Red.
View detail
It may be an individual difference, but Camera broke after less than a year.
I use two units.
One of our RearCamera units became defective after about six months.
I can say that it is to the extent that it is, well, I pulled a HaGap, but I am slightly unconvinced by the operation.
When there is a problem with the Camera, the LEDIndicator on the Switch blinks to let me know, but for some reason, other functions are malfunctioning in various ways.
It is supposed to connect to my phone via WiFi, but the connection is very unstable, and for some reason I could not connect to the Android app, even though the WiFi itself is connected.
Naturally, you cannot drop videos to your phone via the app, you cannot sync clocks, etc., and you cannot change various settings.
At least, the recording seems to be able to continue only with an active Camera.
I suspected a problem with the Body, but since I have two cameras, I tried connecting only the Rear Camera, which showed a problem, to the other Camera, which had no problem, and the application was connected and settings were available.
The LED indicator also seems to be unstable and may or may not display the status of a defective RearCamera, so I think it is better not to trust the operation when there is a problem.
If everything is normal, the camera is Large sturdy, so it might be a good idea to try connecting to WiFi once a month even if there is nothing going on, check if the app is connected, and check if the video is taken properly and the Camera is working properly.
The images that are taken are good enough to check the number of oncoming vehicles, etc., so the performance in that area is adequate.
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
I still prefer OEM.
No araiOEM in stock to try. [Color] I bought Clear
Is the installation stiffer than OEM? It is difficult to align and the gap with the Shield is not easily eliminated....
The feeling of use was cold recently, but araiOEM began to fog up even at temperatures that do not fog up, and it became impossible to run without raising the Shield, so I removed it immediately.
The OEM is a little more expensive, but I was able to reconfirm that OEM is still the best.
View detail
EDR21A
We chose this product because it had good reviews and ratings.
The quality of the product was good and installation was not difficult.
The installation took about 3 hours, but it took longer with the Wiring routing, Cowl removal, etc.
The picture quality is satisfactory with almost no blurring, as I had checked on YouTube, etc. The Body is installed on top of the Battery under the Seat, and it fits well.
Microphone sound is also picked up at just the right volume.
I check the video by unplugging the SDCard from the Body, and the app is easy to use. There is also a way to connect to your phone via Wi-Fi and Download, but other people's reviews show that it takes longer with IgnitionON, so if you are concerned, it is better to unplug the SDCard to watch.
Overall, a very satisfactory product.
I don't know about durability as it has only been installed for a short time.
View detail
Good product.
I purchased MITSUBA based on your Review!
The Large size of Body is a little too large and the length of Camera's Wiring is a little too long.
I am generally satisfied to the extent that I was concerned.
Wiring on the Rear side is left over since the F/RCamera is common.
This type is not a problem because Space under Seat is wide Large.
I think the storage of Body and Wiring is Large in SS and SF Type.
I use Wi-Fi to check the video, but I can't get a connection in Preview.
I heard it was bad, but I had no problem with it.
*It was × on Android, so we supported it on iPad.
The video and performance are beautiful day and night with no problems, so the quality is ☆×4
As for durability, I just installed it. I'll give it a star×3
It is unclear what will happen in the future with warmer temperatures and the rainy season.
So far I think I made the right decision in buying MITSUBA!
View detail
Prepare for accidents and aggressive driving.
I used to use Daytona's monocular ActionCamera and DVR, but it finally broke after several years of use, so I replaced it with this one. The instruction manual is very well written, and I can check the settings and images on my smartphone. I chose front and rear type and pushed the body into Seat CowlRear. 128G card is high durability type. View detail
Mitsuwa Sankowa ALPHA? Compact Single High
I am glad that it is more Compact than I imagined.
It fits snugly under the inside of the Front cowl.
View detail
Old Type, but enough!
The new model is more waterproof, but if you install it properly and are careful when washing the car, the old model is fine and the image is beautiful.
The drawbacks are that the connection with SMA Four Pre cannot be made unless the connection is made with the in-flight mode, and the download of the image data takes longer than expected.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Dimming is unpopular. [Color] It's Clear, so it's not a problem.
I bought it because I have increased Shield.
It is more cost-effective than OEM Product.
No problem using it, but the mounting part floated a little.
If you get the chance [Color] I would like to try Smoke or something.
View detail
Be prepared for anything.
[How is it used?
I installed it about a year ago because I didn't know what would happen.
Was the one you received as per Image?
The body is larger than expected and the wiring is thicker than expected, so it may be difficult to install depending on the type of car.
How was your experience with it?
I am satisfied with the Beauty of the image. Battery seems to go up because it takes a long time to upload to the app.
[Points to note]
In my case, I mounted it on top of the Front Fender, but when the Fork sinks, the Camera hits it.
How did it compare to other products?
Relatively Compact and seems to perform well?
Other items that would be helpful
Items to buy together
Number Bracket
View detail
A little too high.
It is an OEM Product, so it is perfect, but not cosmetically pleasing.
The paint job is also not good.
View detail
Thickness of the plate and good paint job
I installed it on my CRM250AR. Fitting is perfect. View detail
Sounds good! Mounting Bracket is short (I made my own extension bracket)
I know there are different tastes in sound, but I like it. The OEM Horn sound for light motorcycles is
The sound is not so good from the safety point of view, because it is a level that makes you think it is the sound of farts and the sound is small.
When I replace it with this product, it sounds moderately Large and alerts me to the fact.
The week point is that the mounting bracket is too short. This should be left as it is.
"Pon attachment" I made my own bracket to install it separately.
View detail
I thought it was made in Japan, but it was CHINA.
I have owned 3 motorcycles and just bought a new 250 Motorcycle, so I decided to go with Mistuba! (Large type and 400 medium size are made by Aquillo) I didn't look at the box carefully, so I looked at the unit after installation and saw that it was made by Inch China. It was a bit shocking, but it is a JapanBrand and I think the quality is good. First of all, the motorcycle I bought this time is YZF-R25, so there was not much space under the seat. This Mistuba unit is large in width but not thick, so I think it is easy to store. (Acuyo's Unit is about two Mistuba's worth, so it is a little thicker.) Wiring is very easy. I used Scotch 3M Tape for car exterior because the double-sided tape that comes with the camera is not very adhesive and may peel off. The response to IgnitionOn is fast and the quality seems to be good even though it is from CHINA. I always think that when I install a Motorcycle camera, whether it is Acuyo or Mistuba, the Wiring from Unit is too long. What is wrong with long wiring is that if you leave it as it is, the wiring gets messy and dirty under the seat, so you have to tie the cord together with a tie band. Even if you put it all together, the wiring is still long, so you have to use Emon's Relay1.Quantity:It takes a little Space for about 5pcs. To install the result, you will need to use the DrarecoUnit+Wiring Summary×Quantity:2pc. Since space for a set is required, it may be difficult to install for those who ride a large type SUPER SPORTS750, etc., which do not have enough room under the seat. My YZF-R25 was neatly put together using D-UNIT, and it seems to fit under the Seat in the Limit. I think it is good to be able to view the recordings on my phone, but I don't really know how to use a phone, so I would like to see an app that makes it easier to understand. I would like you to make the app easier to understand. However, Mistuba is the only company that I can trust for the quality of the DVR, so if I buy a DVR for my motorcycle, it will be Mistuba's product by all means. I didn't know that Mistuba's DVR was available and bought a Chinese AQUILLO DVR for about 24,000 yen, which was a waste of money. It would have been a disaster if I had an accident and it didn't capture the incident, and I'm afraid that the Acuyo would break while I'm using it. View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Anti-fogging
We are using Arai rx7x and purchased this product because OEM Product is out of stock.
After use, the Left Side Logo is somewhat obstructing the view, but I think it can be used without problems.
The product is also very effective in terms of feel, so we plan to repeat it, including cosmetics.
View detail
You can mount a posterior CAM on Simple!
There are several companies that sell brackets for mounting posterior CAMs, but we chose Mistuba Sankowa's because they have even the screws in black, and the equipment is simple and does not look like it was installed after the fact.
Compared to the Type, which places the CAM on a pedestal, I was concerned about whether the orientation of the CAM would change due to vibration, but so far it is working without any problems.
View detail
I installed it on my CB1300SB and I like that it comes with GPS and Microphone!
I have been looking for this product since early spring to see if Manufacturer was out of stock, and recently I was finally able to purchase it.
We are satisfied with the product texture, performance, and software.
I also like that it comes with GPS and Microphone in case of emergency.
This kind of product does not work only with Single Item, but it can also be used with a Large-size product with a Quantity of satisfaction by installation.:Pair (for Left and Right) I believe that the company will be
If you have a reliable store for installation, we suggest that you leave it to the store.
Also, as information on installation on the CB1300SB, since the Camera of the EDR-22G is quite wide-angle, the position of the Camera is important to eliminate missing images and blind spots.
We recommend checking that area, including leveling, as it can be checked from your smartphone via the app at the time of installation.
For GPS and manual recording buttons, POSH has released a bracket for EDRs, which is good because it can be installed together.
View detail
Awesome Flat Horn
I really like the familiar genuine Beep Beep sound.The sound surprisingly loud and powerful.I like it because it is loud and the sound quality is very good. Product Finishing Quality Is Superb .It is special that anyone who sees this product packed in an attractive way .I really love the way mitsuba sankowa flat horn presentation.I bought this horn because I really wanna replaced my old,rusty looking horn.I try to remove the center nut of this brand new horn because my tw200 terminals pin wires little too short when I try to plug in. When I attached stays to the mounting area this flat horn pins positioning downward.( Most Genuine Horn Pins usually comes upward position )This Flat horn product attached stays should never be loosened or removed and it will change lead wire position angle..To Install this brand new horn onto My TDUB, I had to extended the two wires that coming from the main harness.I used18 AWG gauge 13mm long two electrical wires .Each wire solder into the main harness wires & crimped with the Terminal Ratchet Crimper Pliers, Then Placed This brand new horn the way it positioning & plug two wire terminals in.Took 10 to 15 minutes to get the job done.Product Price is so cheap.Mitsuba Sankowa As a professional manufacturer, I'm so satisfied with the quality and the price.The package received in a good condition and nicely packed.Thanks For The High Quality Packaging.Nice Online Shopping Experience.Very Happy Customer .Highly Recommended.Thank You So Much WEBIKE. View detail
Mistuba Sankowa is a reliable Mistuba Sankowa.
This is my second Mistuba Sankowa. I considered a Chinese product because of the budget, but I decided to go with the Chinese product because of its practicality in terms of operation and price. I have to give it a -1 rating because the Microphone is attached to the body.
I am generally satisfied with the rest. Recommendation.
View detail
A little more room for maintenance would be a no-brainer.
We have had a malfunction that prevents us from recording and have contacted the Manufacturer.
Cause. Disconnection This was due to the
I have not disassembled it myself, so this is just a fantasy world.
If you repair it yourself, even though the joint is protected with Resinetc.
Since there is a vibration problem, we would appreciate it if you could design a system that places the highest priority on maintenance.
I believe it was a design issue with Balance for Noise and Weight for vibration response.
We are satisfied with the response of After Service as a Manufacturer.
Not only did I have no complaints, but the Large change was wonderful.
View detail