Reviews
Grip is amazingly durable!
[How is it used?
This product was stuck on an XR250 Seat that was purchased used by a person at work about 15 years ago from the beginning.
The vehicle had been restored to the best of my ability at that time because the exterior of the vehicle was damaged except for the Seat, and after many years it came to me a few years ago.
The exterior of the car was damaged by ultraviolet rays, and the tires were badly cracked and the brakes were sticking to the car.
Sorry for the long preamble, but even in such a state of exterior rustling, only Seat remained flexible.
The surface had lost its Luster due to water stains and dust, but after washing the car and applying a protective material, it returned to the condition it was in 15 years ago.
It is indeed a product sold by Webike for 10,560 yen, and is definitely more durable than the OEM Seat Cover.
How was your experience with it?
When the car came into my possession, I again did Restore maintenance on each part of the car, but I drove it for a while without reupholstering the Seat (I eventually replaced the Seat Cover with another Manufacture's one to match the repainted exterior).
GripperMaterial that "Demonstrate Exceptional Flexibility and Grip Power" as the manufacturer's slogan says, is used throughout.
Assist Rider's Machine Control. The flexibility and gripping power did not deteriorate even when exposed to ultraviolet rays, rain, wind and dust.
How did it compare to other products?
As I mentioned above, I had replaced it with a Dimple-finished Seat Cover made by another company, but the Seat Cover remained as flexible as a new Seat surface after more than 15 years. I think it is phenomenally Tough.
[Points to note]
Not so much as a warning, but the moat on the Seat Cover named GripperMaterial was deep, and if the Seat was bathed in mud, the dirt would get into the deep moat and be difficult to remove.
The product is three-dimensionally sewn for XR250 (MD30), so it is relatively easy to work with if you have experience in Seat reupholstery in the past.
Other items that would be helpful
The deciding factor in the purchase
As I mentioned at the beginning, it was already stretched at the time of purchase on a used car.
[How is it used?
Basically, it is a city Main, and I am fully aware that it is a high-performance Motorcycle for a 4StDual PurPass car at that time, but I could not handle it because my feet could not reach the ground on rough terrain, and I lacked the skills.
【Included Parts:presence or absence】.
Quantity of 1 Seat Cover and Instruction Manual on how to apply.:Set
I don't think there was a tandem belt attached.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
The fabric joints are crimp type like OEM, so there is no slippage, I think Coking agent is not necessary.
Opinions and requests to Manufacturer.
An indispensable manufacturer in the off-road motorcycle world.
We look forward to your continued development of a wide variety of lineups.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Two amateurs, beautiful.
It took two large people about an hour to complete the reupholstering.
It is very difficult and time consuming for an amateur to put it up neatly by himself unless he has Air Tucker or someone to help him.
This time it was a cheap Tucker 2000 yen or so that I used.
You'll want to get on it as soon as it's strung up nicely.
View detail
Seat Replacement beginner friendly!
Reason for purchase
The normal seat has a hole in it and it absorbs water.
I bought it to deal with the Urethane inside as soon as possible because it was going to be torn apart.
I was hoping it would be sooner than later because the actual hole was 2017WAX old man.
Three years have passed.
Reupholstering work
First of all, I'll briefly explain how you will perceive it depending on your experience with reupholstery.
I'm new to reupholstering, I've reupholstered twice in Total.
1st time... WR250XNormal Seat Cover was peeled off once, and Normal Seat Cover was reattached again by shaving the Urethane of NORMAL in the low footpegSeat style (Manual Tucker).
2nd... KLX125SPIRAL High Seat Replacement... Because there was animation, this was referred to, but because Spec. of Seat cover had changed, because it made a slight mistake and redoed several times, the hole of Tucker has been vacant for a lot of failures. (Air Tucker)
The reupholstering process began as anxious as ever.
You will need to adjust the air pressure and the specs of the tucker bullets, etc. because we used the Air Tucker this time.
If the air pressure is high, it will punch out the seat cover, and if the legs of bullets are long, the legs of bullets may come out on the surface where the urethane of both sides of Seat is thin. We recommend you to check the spec. of Air Tucker when you purchase it because some of the Air Tucker's spec. cannot be used with the legs less than 10mm in length.
The bullets used in the OEM were 3-4mm, I believe.
When the adjustment is finished, temporarily fix the upper and lower Quantity:Pair (for Left and Right) Tucker to the front of the Seat.:Pair (for Left and Right) in turn stopped towards the back.
If the sagging occurred, I pulled it back again from where it had returned slightly and stopped it.
However, I punched out two parts of the seat cover due to the air pressure adjustment failure and the blank shot.
Quantity every time:Pair (for Left and Right) It was a Large oddity to pull on the even etc. and also to pull on the front and back without any slack.
The Seat coverBody is different from the previous models in that there is quite a bit of room between the place where you hit it with the Tucker and the place where you pull it with your fingers, and it was quite easy to pull it.
Effects
I haven't ridden it in bad weather, so I don't know how well it works in extreme conditions.
On normal courses and riverbeds, the Grip is frankly better than the Normal seat.
When I tightened Seat with my thighs on the climbs of the gully and the steep climbs at Standing, it was hard to move backwards.
I had to use my arms to hold on to my body as it was being taken backwards, but the rate of that was reduced and the Stamina in my arms lasted longer.
Current state
The current state is not slippery enough, but I wanted to add a grip on the shape of the seat cover in addition to the grip on the material.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
My First Seat Replacement
It was the first Seat Replacement, or temporary fixation & rarr; a few times for the main fixation Repeatedly, it installed beautifully with no deflection
The quality is very good and will last a long time! (^^)
The bottom line is that Grip AllGrip It is only claimed to improve RidingControl with a good grip (^.^)
ThailandHonda OEM's BlackSeat and SpiralSeat cover and I was hesitant to buy it, but I thought the grip power, material, etc.. I think (^ ^)
View detail