Reviews
Fits: Others Wire clutchCompetition model, SUZUKI RMX450, SUZUKI RM-Z, SUZUKI RM, KAWASAKI KLX450R, KAWASAKI KX-F, KAWASAKI KX, YAMAHA WR-F, YAMAHA YZ-F, YAMAHA YZ, HONDA CRF-X, HONDA CRF, HONDA CR
Definitely lighter.
I had been using OEM Clutch for a long time, but it was too heavy and tiring, so I replaced it with this one.
To install, remove all the originally attached clutch lever and holder, leaving only the wires in place, and then install.
The dust cover is screwed on, so it must be disassembled and assembled before installation.
Also, the Clamp portion is rotated so that it is less likely to break than a regular Lever or OEM.
The Nut that adjusts the distance of the Lever is also hexagonal, a spec. that can be firmly fixed in place.
I prefer to set it quite far away, but it feels quite light when I pull the lever, I don't know if it's because of the Ratio or some other secret, but I think you can feel it the moment you hold it.
View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled)
Maniacal Parts
I've been wondering about buying it for a long time … it's just a stick.
However, I think you can experience it.
For example, if you intentionally put a load on the Front and drive into the Corner, the Wheel turns smoothly, and the suspension moves well and feels light!
I just wondered if it is a Maniacal Parts, like … only for those who understand.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
I looked at it in comparison. Both
I tried both Slip-on lineCarbon and Slip-on lineTruck di.
There is also a powerful low-speed Torque. Carbon, on the other hand, is a little slower at low speeds, but it seems to accelerate faster up to high rpm.
I will do so. This is a personal opinion, so you can choose by Design
I think. I think the performance of both is excellent.
View detail
These are the ideal Gloves!
The design and comfort of the Gloves are just like the Image! 。 Leather is soft and fits my hand very well. 。 We have a solid Protector in place where needed. 。 This is the second one I have purchased from you, but I am glad I took the plunge. 。 The other one is used by a friend of mine and is well received. 。 The result is Large satisfactory product. View detail
Great grip comfort
The OEM Lever for the SV650 is a good or bad bike Level, but this Lever not only looks cool, but I was surprised at the high quality when I held it for the first time after installation!
Installation is easy and takes less than 30 minutes if you have experience with grease up and lubrication of Lever!
View detail
trial and error
Only Bracket is purchased to install Separator.
Since it cannot be installed as it is, it was processed secondarily. The Stem Steel Emblem is not installed.
Please note that this is not normal usage.
View detail
Tightens up the look.
Was the one you received as per Image?
It was something I saw often, so it's on Image.
Was the installation difficult?
I used a hand guard from the same Manufacturer, so no problem at all!
How was your experience with it?
I don't know if it is useful yet because I haven't driven it in a place where it would be useful, but it looks very atmospheric and satisfies my sense of ownership.
[Included Parts:were they on?
Installation Bolt
[Was there anything that disappointed you?
None
Other items that would be helpful
Of course, the same Manufacturer's hand guard is only a few minutes' work!
View detail
Stable quality
The quality is stable and the cosmetics are good.
I have used it for almost 10 years and it has served me well.
It protected Motorcycle, which was parked under the eaves, for many years.
View detail
No different than OEMs
Purchased due to leaking oil line. I am glad that the quality is the same as OEM and the price is lower. I will buy again when it breaks. View detail
After much waiting, it finally arrived!
Cool! I'm glad I put it on! ♪ (??????) ♪ View detail
Niche tool but Large active!
True to its name, the Brake Pads Opener is a great tool for widening the gap between Brake Pads.
In our house, this one has been used from One Side 1 pot of Hara 2Scooter to 6 pots of Large type On road facing each other.
How often do you use it that often? You might think,
It is used unexpectedly frequently for assembly after cleaning the brake caliper or reinstallation of the wheel after removing it for tire replacement, etc.
In my case, I also have an off-road motorcycle, which I use for both touring and racing, and I prepare separate wheels for touring and for racing and set up tires on each wheel, and then change each wheel depending on the application.
I change the wheels for RaceWheel about 3 times a year and change them for TouringWheel when the race is over. Therefore, the Opener is a big help to me.
It's not bulky, and it's a really useful tool to have, so it's a recommendation!
View detail
People who like the NORMAL form.
Installation takes about two hours while carefully curing.
It is very easy to remove the cover if you do not pull it off and do not make the mistake of shifting it to the Front side.
The volume is moderate and not loud, and there is little change in the feel of operation and blowing. The weight is lighter, so there may be some benefit to this.
If you like the "I made it custom" look, this is the one for you! If you like a less "custom" look, this is a good choice for you.
View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA650R, KAWASAKI VERSYS 650
For NINJA400R
Installed on NINJA400R.
Since it is an important safety part, we asked Motorcycle shop to install it.
The feel of operation, texture, etc. was perfect without any complaints.
If you are not confident about installing it yourself, ask a professional contractor to do so.
View detail
Excellent Material
[How is it used?
I bought this CenterTank Pad to prevent scratches on the Tank.
I regretted that I bought it so early because I didn't put anything on it at first, so it was damaged at the Center just two months after delivery and the gloss was gone.
Was the one you received as per Image?
There is something needed for installation, so it can be attached easily.
Package is also Green type, so Kawasaki users may be pleased!
Was the installation difficult?
It is just like a regular Sticker because you just paste it.
But since it is a Center pad, it is useless unless it is attached to the Center, so it is better to Center out.
It might take that long. After that, there was no problem when I applied it while slowly releasing the air.
Universal Product, so it can be used for any type of car.
How was your experience with it?
It feels like a proper anti-scratch expectation.
Material is also cool and full of luxury.
At first I was going to use a GSX1300R HAYABUSA OEMCenter pad, but it's big in the middle. "GSX 1300 R HAYABUSA" I just wanted something thimble, and since I also use EasyGrip's Knee grip, I decided to go with this one, partly because I wanted to unify the two.
[Included Parts:were they on?
Sticker or Alcohol Tissue.
I find it very convenient because it has everything I need for pasting.
[Was there anything that disappointed you?
No, I don't!
Perfection
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I chose EasyGrip to avoid corroding the Paint with poor quality glue, which inevitably leads to sunburn and deterioration due to UV rays in inexpensive products that often ruin the texture. I believe this will never be a problem.
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
I'm glad I bought it
[How is it used?
I purchased this product to prevent scratches after delivery, but the knee grip is more effective than the actual scratch protection.
I'm new to wearing a Knee grip myself, and I'm so pleased with the effect that I'm bummed after installing it.
Was the one you received as per Image?
First purchase of the famous EasyGrip
The delivery time was a little long, but I think it was worth the wait.
When I open a new one, it smells like Rubber from a shoe store, I like myself Large.
Material is soft and nice to the touch
How was your experience with it?
After attaching the grips, I tried riding the bike, and wow! The knee grips were great. I have always leaned forward, so it was hard for me to ride for a long time or to make a sudden break because all the weight of my body would be on my wrists. After attaching this product, my knees became the fulcrum and the weight on my wrists was alleviated, and my upper body felt lighter.
Also, even when cornering, the knees are firmly hooked, so you feel as if you are one with the vehicle, without slipping.
[Points to note]
When pasting, please be slow
If you do it in a hurry, you get a lot of air, which is not aesthetically pleasing.
How did it compare to other products?
I can't say I've used any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
My Motorcycle is pure White, [Color] I thought Clear would be the best, but EasyGrip's [Color] Clear is a bit with-color or yellowish, so it stands out even if you put it on a normal white motorcycle. So, I think Black would be more suitable for White Motorcycle.
View detail
Required for Master Hose replacement
[How is it used?
Purchased a new Master Cylinder with the replacement of the old one.
The OEMHose is a little short, so if you use an external master like brembo or GALE SPEED, it is not long enough, but if you use an extended VERSIONBolt, you can use it as is somehow, but the angle is a limit, so it could crack and break at any time.
Large front brake, so do not let your guard down!
Was the one you received as per Image?
Usual quality
I don't think there is any other manufacturer that offers this kind of product except Active.
This is a great product, you don't have to replace the entire hose, which saves you money!
Was the installation difficult?
Can be difficult if you're a beginner.
When removing the hose, be careful not to spill the Fluid!
If you put it somewhere, it will discolor or corrode quickly, so please prepare water before proceeding.
How was your experience with it?
as expected (as opposed to expected)
With this, you can change the Hose from MASTER to HOSE at will.
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
I don't have it, but if it were a little cheaper...
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Why is the same number of Ding as OEMs so expensive….
What made you decide to buy?
I have been working on the ZX-6R for 3 years now, and the mileage is about 10,000 km. I thought it was too early to replace them, but since all the parts were available during the spring sale, I decided to replace them.
[How was the installation?
I found information that the Torque of the Engine Sprocket nut fixing the front sprocket was halfway tight, so I loosened the Engine Sprocket nut using an electric Impact wrench from Tirefor Replacement. After that, I tightened the rear brake with the torque wrench at the specified torque of 147Nm, and finally, I bent the washer over the nut using the water pump pliers to prevent it from loosening.
*We are planning to describe this replacement work in our maintenance diary. Please take a look if you like.
How was your experience with it?
At first I was not sure whether to go with 16T or not, but I liked the ride quality of the OEM, so I decided to go with 15T, the same as the OEM. So there was no change between before and after the replacement. The normal specifications list on the product page says 16T, but the 21-year ZX-6R has 15T Front, 43 Rear, 2.866 reduction ratio, and 112 Chain links.
View detail