Reviews
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Very Nice
Very nice compliment to the Pod filters. It gives more storage and blocks the gap. It is also a nice thick quality. Just be aware that the fact that it is mounting on the tank bolt only means that it is not very positively located especially at the bottom. but it doesn't matter too much as you shouldn't put very heavy items in there anyway. View detail
Fits: KAWASAKI ZEPHYR400χ
BaGOOSE integrated Fender Eliminator Kit installed
It fits perfectly and is easy to install. It is very good to have a wider cargo space and to be able to load tools, etc.
Clearance of Rear tire and Fender will be somewhat less.
It takes a little care when going over steps.
I'm glad I put it on.
View detail
Fits: KAWASAKI ZEPHYR750
Fitted to match RearWheel inch up
Originally, we were thinking of TireInch Up and 520Conversion by replacing the Wheel, so we replaced the Sprocket Cover.
It is very light compared to the OEM SPA ROCKETCover.
In addition, unlike the Covers of other manufacturers, ZEPHYR's long Shift rod is stable and the Shift operation feels good because of the Shift Support.
The appearance is also very refreshing around the Cover and the body looks tighter.
As for the cost, the cover, bolt, etc. are all made by Anodized, so they are very expensive. However, considering the lightness, sturdiness, and effectiveness of Shift Support, it is worth considering.
View detail
Easy to see with Simple
I had installed YOSHIMURA's Progress2 water temperature gauge because the OEM water temperature gauge did not give an accurate water temperature, but I wanted to fix it in a position where I could easily see it.
It is a simple construction, but the mounting frame is small enough to easily see the meter.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Recommended for OEM Replace
The OEM mounts are subject to uneven wear on the chain and sprocket due to wear on the engine and strain on the chain over time, so they were replaced as a countermeasure and as a dress-up.
Before the replacement, the Chain had a tendency to be quirky in the gnawing area, but it is now straight.
My car body still seemed to have a kinked Engine due to age.
The pure Normal Thread Screw was also rusted and seemed to have rattled, so I was glad to replace it this time.
I think it will be Plus in practical terms as well, since it can also dress-up and prevent kinkiness.
It is a bit expensive, but I thought it was better than buying OEM.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Easy
I am very happy with the look and feel of the product. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100
It came with an installation Instruction Manual, so I felt safe.
Was the one you received as per Image?
It was exactly as pictured.
Was the installation difficult?
Rear wheel, tank, and air cleaner box are difficult to remove and install.
Wiring is also quite troublesome
How was your experience with it?
Stylish and good around the Rear, great!
[Included Parts:were they on?
BaGOOSE's Sticker is Quantity:1pc.
[Was there anything that disappointed you?
In my case, the hose around the rear brake master interferes with the brake switch, so I just have to be careful to dodge it.
There is an Instruction Manual for installation, and if you have a Skill that can remove and install the wheel, you should be able to do so without any problems.
Since the Blinker and Tail lamp will also be removed, I think it would be a good idea to replace them as well.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Well made product.
I bought this because I changed my carburetor to a TMR, and it is an Exclusive Design, so it fits EXACTLY in the space where the Air Cleaner Unit was removed, and the oil catch tank can be laid out SMART, and the finish is great.
We asked our favorite Custom Shop to install the product, and they were impressed with the well-thought-out product without any particular difficulty.
View detail
A must for FCR Carburetor Body!
[How is it used?
Touring, city driving
I purchased this to fix the Idol Adjustment Wire on the FCR Carburetor Body.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy just to tie it to the Bolt on the Flow Chamber.
How was your experience with it?
Wire is well fixed and easy to use.
[Included Parts:were they on?
It is attached.
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Thin Pull switch
I installed this switch on my zrx1200ZrX1200 DAEG. I could install the switch without thinking about the wiring, but I had to drill a 5mm hole in the handlebar to fix the switch in place. I put some paper tape on the handlebar and painted the protrusion of the switch and pressed it into position. View detail
The costumes are good
The product itself was installed without any problems, and there were no problems with the operation, making it a very good purchase. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
For Trouble Avoidance
Simply replacing the OEM plastic parts, which invariably crack, with aluminum will give you peace of mind! View detail
Everything is in the best balance!
I wonder about the 4,400 yen Gold amount difference with and without Emblem.
I dare to choose this one.
I'm not a fan of the bulky Silencer.
Size-wise, this feels just right.
The weld marks are also very clean and combined with an austere finish with no burnt color.
The overall impression is elegant and luxurious.
The volume is slightly large, but there is no crackling and the sound is pleasant to the ear.
The inner punching 50mm is more comfortable for engines tuned for high compression.
The volume is socially O, but it's not too loud.
We are also considering purchasing Silent for our vehicle inspections when we have more room in our budget.
View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750
THE detail that does it all.
A piece can be seen, a change without really noticeable effect. but a more qualitative visual on the kawasaki 750 Zéphyr. -------------------------------------------------- -------- A room can see, a change without really significant effect. But a more qualitative visual on the Kawasaki 750 Zephyr. Powered by Google Translator View detail
Fits: KAWASAKI ZEPHYR750
Clutch is now lighter.
The ZEPHYR750's clutch is not that heavy, but I was concerned about fatigue after long hours in traffic.
I am self-satisfied, but I am satisfied because it looks Custom and lightens Clutch.
I think the price is high, but it is not something that can be found in Large quantities, so I guess it can't be helped.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
ZEPHYR750Oil seepage
Initial ModelEngine's problems were solved with a simple operation.
When the head cover is removed, it repeats again.
View detail
Refresh the ignition system as well.
Since it is a '99 car, there is a possibility of Coil-related deterioration due to the age of the car.
Replaced by preventive maintenance.
This was my first purchase of this type of product and I was amazed at how well it worked.
First, the Engine's startability has increased.
It seems to be kind to the Battery as well, as it runs the Engine without using extra electricity.
And the most surprising thing was that the Engine's rotation became Linear to the Axel's movement! 。 The blow up is so smooth that it is hard to believe that it is an OEM carburetor.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Superior Replacement.
This is what the OEM should have been, although i have had my 1994 Zephyr 750 since new and the plastic/resin oem lasted 28 years so the Bagus should last a very long time. Bagus and Ems post same price as buying an oem complete seat lock, Bagus is better, View detail
Fits: KAWASAKI ZEPHYR1100
A necessity once the air cleaner is removed.
The OILCatch tank and Accessory Case are well put together and look Refreshing and Balance.
I am hesitant because of the price, but I think it is easier to use this product than to install different manufacturer's products and mess around with them.
The Accessory Case holds all the carburetor adjustment jets, tools, and dustcloth, so it is very useful for stopping along the way to readjust the carburetor.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
BaGOOSEAluminumSeat lockplus GPZ900R
Seat lock became inoperative.
I would feel good about replacing it with this product.
Seat can now be detached.
Recommendation.
View detail