Reviews
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
It's difficult, isn't it?
I put Meter's Film on the new car.
I thought it was no different than GlassFilm for cars.
He applied it with a mild detergent.
Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee dust ・・・・ tears
That's a tough one.
I wouldn't worry too much about it since it's for Meter Protection purposes.
Fortunately, it is expensive and contains two different types of films.
I'll try again next time.
You must be a PRO to be able to do this so beautifully.
View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
For Meter Protection
Purchased for Meter protection as per Title
It came with two sheets, AntiglareType and Super clearType, and I thought it would be nice to be able to choose the one I prefer.
Antiglare was selected for this project and Super clear was kept as a spare.
The accuracy is a little low and some parts are not fully covered, but it is acceptable. The view is not particularly different.
View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
It is satisfactory enough.
I purchased this product to protect my TFTDisplay when I took delivery of my car. I feel it is a little small, but I am fully satisfied with the quality and performance among many products. I will buy it again when it deteriorates because of its good cost performance. View detail
Fits: HONDA CB1000R
Easy for everyone, not for everyone.
I'd probably buy this 3-Quantity.:4 Set
because Somehow I'm not satisfied with the finished product." From
What I mean is that, first of all, the design phase Film shape/effect after installation." The accuracy of the product as a "product" is satisfactory, but the manufacturing process Accuracy and quality as a final product." not very good
The manufacturing method is probably to stamp out the Seat with a die, but the fine BALI is left in a few places on the edges, so no matter how much you apply it to Beauty, those few places will float…MeterFilm is not a very strong product, so it is not strong enough to stick, so it will float a little bit. It's a little bit of floating, but it bothers me a lot, and once it floats, there's nothing I can do to hold it back.
As a solution, you can cut the straight edge of the Film by 0.1mm before applying it. (I had to buy several times for this reason, resulting in a huge surplus of Antiglare).
So (Okay, okay, you put it up well.) I was gently wiping the corners of the bag, and it caught a corner and floated away, and then I got a fine dust in it and said, …... "… You really are a …" something like that
Image of the product. Pi Turn!" But you should not expect perfection!
Of course, if the compromise point were lowered to the extreme, Large would be sturdy, but since it's always in sight, that's not going to happen in the end. (It's my fault.)
Maybe the finished product would be better if I made it myself using Free cut for PC….
View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
I think it's easy to apply.
The thick Film is easy to apply.
All we had to do was prepare the misting sprayer and we had all the rest we needed.
There are a few gaps, but I think it is a compromise.
I am satisfied with the quality and texture, but I gave it a 4 because there may be something better out there.
View detail
Fits: HONDA CB1000R
It is a pretty good product!
It's a product that buys peace of mind.
Instruction Manual is also very careful. It is recommended to apply it carefully in a place where there is no wind.
View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Seal to protect the Meter screen.
Seal to protect the Meter.
It's like putting it on your phone.
Scratch protection, more secure with it than without it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
PanelProtection film was applied prior to delivery.
I bought a new car at Kawasaki Plaza, so I was able to put it on on the day of delivery in an environment free of Garbage and dust in the store.
Kawasaki Plaza was also pleasant enough to take the time before explaining the delivery of the car, and I was able to attach it with a sense of calm and peace of mind.
I was able to paste it well.
Since the size is a little smaller, place the film on the panel in advance and check the gap size around the film in the panel.
Image and then paste with Just fit.
Since the patterned paper is included in the product bag, it can be applied beautifully by gently pressing down on air pockets and the like.
I pasted the Super clear (transparent) one, but it looks like it is still OEM with nothing pasted on it, and I didn't realize it was attached.
It is a beautiful finish that I can't believe. I would eventually like to purchase one from the same Manufacture when the Panels are damaged.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Construction is easy.
originally [Color] By applying the film, the clear screen will look like frosted glass.
It is my personal preference, but I thought it would be more Refreshing to cut out the Protection film from the phone.
View detail
Fits: HONDA CBR1000RR FIREBLADE
I'm satisfied
Bubbles were left on the bumps at the right end. I would have liked more clear instructions on how to work with it.
I am considering repurchasing.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Wound prevention
I had a hard time attaching it, but I managed to do so. View detail
Fits: HONDA NC750S, HONDA NC750X, HONDA Integra
Difficult to apply without air bubbles.
It is difficult to position the meter and to apply it well without air bubbles.:1pc. Fail and waste anymoreQuantity:1pc. was somewhat Gapped but not after, so the position was compromised. Considering that, this pricing is not very satisfactory. it might be enough to cut out and make it on the Universal Protective Seat with my own pattern paper. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
[Color] Clear Protection Seat
It was easy to install, just spray water with a misting spray and use the included brush to release air bubbles. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Meter panelFilm
The Meter was applied to the Meter without wrinkles as long as the dust was removed cleanly. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Meter panel protective film to protect from scratches
Asking PRO to protect the Meter panel just in case it seems to fail to stick.
The workmanship is good, but I am not very satisfied with the overall cost performance, including the labor cost.
About the contents of the product, 2 FilmQuantity:It is a Set, but Antiglare is not necessary and two Super clear cards are fine.
If you fail, there's always the next time ….
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Price suitable
It was put up at the same time as the car was delivered.
All Quantity:It comes in a set so it can be applied right away.
I don't think air will get in unless it is very messy.
However, the visibility will be adequate.
Do you want to see the OEM intact and clear, even if scratched?
Do you want to endure the visibility and continue to ride in peace?
Can it be scratched in the first place?
I feel safe. (Insurance for the mind) I chose the
View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
The size was perfect!
It arrived soon after I placed the order. I ride a C400X and my wife rides a C400GT. [Color] With Clear [Color] Quantity in Smoke:I installed the two sets of 2pcs. on each of them. I was able to apply it to both units without any air bubbles, and I feel that the meter is now easier to see. I am glad that I purchased this product because the dirt on the meter can be easily wiped off. View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Great
I like that it comes in two types, Antiglare and Super clear. It was easy to apply. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Visibility is somewhat reduced.
It will be somewhat difficult to see, but I think this is something that can be solved by getting used to it.
Installation is very easy, but the Instruction Manual will help you to "Blue" (Sealetc.) is probably the one labeled "Black" I think it is a good idea.
However, it is easy because all you have to do is wipe the Meter clean and apply it.
I had a little air in it during the application process, but I was able to remove it by lightly rubbing it and pushing it to the edge.
It is not SUPERJUST fit, there is some gap, but I personally don't mind it.
View detail
Fits: TRIUMPH Speed Twin 900, TRIUMPH Scrambler 900, TRIUMPH BOBBER, TRIUMPH SPEEDMASTER, TRIUMPH Street Twin 1200, TRIUMPH Street Scrambler
Satisfied
Similar products purchased and installedLarge failure in the past.
I once had a MeterSeat stuck on me that was wavy and dirty!
Purchased with no expectations with a half given up MODE.
This product is a little firm and hard
I was worried about whether the MeterGlass of BonnevilleBobber's 3D Lens would Fit…
Even as an amateur, I was able to apply it beautifully without any waves or bubbles, thanks to the instructions in the Instruction Manual.
It is important to mist the adhesive surface with water diluted with kitchen detergent.
Once it is applied, break it in with the scraper provided.
After a few hours, the air bubbles are gone and it's all one piece.
It helped to have another one in Failure or for Replacement.
View detail