Reviews
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I feel an angle hits strongly and it is not good. When I grasp, it hits immediately the third finger and the little finger which are holding the grip, and it hurts. It seems that it does not suite the form of my hand somehow. Since texture is good, it is regrettable." View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
It attached to ZZR250 instantly. The relation Response and Position of the Clutch at the time of real run could also be set up finely, and I have satisfied them. You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I ha
It attached to ZZR250 instantly.
The relation Response and Position of the Clutch at the time of
real run could also be set up finely, and I have satisfied them.
You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I have also said the Design well to mind, doesn't the back become for a while?
pure [ like a Clutch / in brake operation ] in case of the present Reach -- because it is shorter, rather than former, grip will be needed and a Stress will be felt.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good to
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good touch. View detail
In order to prepare for an unexpected fall, carrying of the reserve of a right-and-left lever is indispensable. As a lever for bandit 1250 which can be bought with Webike, this right-and-left set is cheap. As insurance, it is enough. Although
In order to prepare for an unexpected fall, carrying of the reserve of a right-and-left lever is indispensable.
As a lever for bandit 1250 which can be bought with Webike, this right-and-left set is cheap.
As insurance, it is enough.
Although it is the bandit 1250 said for there to be little bottom space of a sheet incidentally, it can store one lever at a time to the overhang space of the right and left of a rear cowl.
View detail
![Xr100 Motard 100Cc[05-06] Right/Right Set Silver](https://global.webike-cdn.net/photo/article/01/1298259750801L.jpg)
Fits: HONDA XR100 Motard
It attached to XR100 motard. It is attached although form is different in it being pure. However, die length is slightly short. Only three fingers start as it understands with a photograph. For the reason, a clutch feels it heavy. If i
It attached to XR100 motard.
It is attached although form is different in it being pure.
However, die length is slightly short.
Only three fingers start as it understands with a photograph.
For the reason, a clutch feels it heavy.
If it thinks as a reserve when something is, I will think that it is good.
It is not so expensive.
View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200V SPORTSTER72 SEVENTY-TWO, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON SPORTSTER ROADSTER, HARLEY-DAVIDSON XL1200CA SPORTSTER LIMITED, HARLEY-DAVIDSON XL1200L SPORTSTER LOW, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON SPORTSTER SUPERLOW, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON SPORTSTER IRON883, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13
He bought twice 1200R of 04 models. the thing in which this price is cheap at two -- it is a word. As to why he bought it twice, it becomes hollow and is because it has broken. _l~l-lll GAKURI ... (smile)
He bought twice 1200R of 04 models.
the thing in which this price is cheap at two -- it is a word.
As to why he bought it twice, it becomes hollow and is because it has broken.
_l~l-lll GAKURI ... (smile)
View detail
It purchased to KSR-2. When a price and form are further said, how to break is also normal and about 1 clue. However, probably, a generous direction will be good to have somewhat more mostly by a spare, since the prices of brand-name parts are als
It purchased to KSR-2.
When a price and form are further said, how to break is also normal and about 1 clue.
However, probably, a generous direction will be good to have somewhat more mostly by a spare, since the prices of brand-name parts are also going up KSR-2 which is a discontinued car soon.
View detail
![MAJESTY125 [Taiwan] [01-02] (Left And Right Set) Lever Silver](https://global.webike-cdn.net/photo/article/97/1258196470797L.jpg)
Fits: YAMAHA Majesty 125
Since the contacting parts of the stop lamp sensor of a front brake lever are worn out and the stop lamp also turned on idling, it exchanged for right-and-left coincidence on the occasion. Since there was also no prejudice called especially Colet ! fo
Since the contacting parts of the stop lamp sensor of a front brake lever are worn out and the stop lamp also turned on idling, it exchanged for right-and-left coincidence on the occasion.
Since there was also no prejudice called especially Colet ! for the moment, when it searched by normal and the engine performance like equivalent, since this lever set was cheap, it purchased here.
As a lever, it is almost the same as normal.
However, the stopper of simple parking which takes the side of a rear brake lever was not a smooth motion like [ a motion is astringent and ] normal.
Is it touch of [ carry out grease up and / very ] or?
Since he is seldom using it usually, if it is considered as the function, he will think satisfactory kana, but I think that it changes here by people.
View detail
Fits: HARLEY-DAVIDSON FLHT Electraglide, HARLEY-DAVIDSON FLHTC Electra Glide Classic, HARLEY-DAVIDSON FLTCU Tour Glide, HARLEY-DAVIDSON FLHTCU Ultra Classic Electraglide, HARLEY-DAVIDSON FLHRI Road King, HARLEY-DAVIDSON FLTR Road Glide, HARLEY-DAVIDSON FXST Standard, HARLEY-DAVIDSON FXSTB Night Train, HARLEY-DAVIDSON FLSTC Heritage Classic, HARLEY-DAVIDSON FXSTC Softail Custom, HARLEY-DAVIDSON FXSTS Softail Springer, HARLEY-DAVIDSON FLSTF Fatboy, HARLEY-DAVIDSON FLSTN Heritage Nostalgia, HARLEY-DAVIDSON FXSTSB Bad Boy, HARLEY-DAVIDSON FLSTS Heritage Springer, HARLEY-DAVIDSON FXSTD Deuce, HARLEY-DAVIDSON FXCW Locker, HARLEY-DAVIDSON FXCWC Rocker C, HARLEY-DAVIDSON FLSTSB Crossbones, HARLEY-DAVIDSON FLS Softail Slim
SUPOSUTA XL1200S was equipped. The hand was small, and at the time of touring, although the second half was in the quite hard situation, it has been improved considerably. Since a price is also handy compared with a misumi etc., it is recommended
SUPOSUTA XL1200S was equipped.
The hand was small, and at the time of touring, although the second half was in the quite hard situation, it has been improved considerably.
Since a price is also handy compared with a misumi etc., it is recommended in the direction ! a few also wants to improve the fatigue of a hand for the time being.
View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200V SPORTSTER72 SEVENTY-TWO, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON SPORTSTER ROADSTER, HARLEY-DAVIDSON XL1200CA SPORTSTER LIMITED, HARLEY-DAVIDSON XL1200L SPORTSTER LOW, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON SPORTSTER SUPERLOW, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON SPORTSTER IRON883, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13
Although it is a price of one duty of the manufacturer of the other company, it is thought that structure became the thinness of a domestic car and the level quite by the thing, and its operativity also improved. Although the bearing was contained, it
Although it is a price of one duty of the manufacturer of the other company, it is thought that structure became the thinness of a domestic car and the level quite by the thing, and its operativity also improved.
Although the bearing was contained, it was seldom able to feel having become a smooth by it etc.
It is not adopted pure, and if a bearing part is made into color and a price is lowered will be considered.
However, cost performance is dramatically high and a recommend for the first directions and women to ride on a harley!
View detail
Although it is this lever, Attach, and when [ which is the Taiwan lever which the kitaco deals with ] it sees, a thing the clearance of the lever by the side of a front wheel and a handle upper cover, [ fairly last-minute ] it hurts, if the grip p
Although it is this lever,
Attach, and when [ which is the Taiwan lever which the kitaco deals with ] it sees, a thing the clearance of the lever by the side of a front wheel and a handle upper cover, [ fairly last-minute ]
it hurts, if the grip part of a lever has the effective edge and grasps empty-handed, moreover it may interfere depending on a car body, since it is only about about 2 cm ... if a glove is stuck well, it is satisfactory at all.
Since there is at least this, the external article lever in which a design is quite smart is recommended in the considerably conspicuous direction which wants to distinguish between people.
View detail