Reviews
Also attached to DL 1000 V-STROM 650
2017DL1000 I was looking for Fitting kit to attach Top case to V-STROM 650
The most valuable thing was this SHAD. We are not listed in the applicable model of Big,
Since it was able to be searched as applicable model in the overseas site, I bought it.
However, it does not use another Bracket like GIVI and just tightens it to Carrier installation Bolt,
I do not need the hard case, it is Recommendation for people good at around 40 L.
Base has only necessary holes, so if you are good at machining you can add additional holes
It may be used as an inexpensive Base for other companies' carriers.
View detail
Attention required!
First of all, please replace the product image as soon as possible !!
The product currently on sale ProductNo YOMJ 15ST and YOMJ 14ST in the image are completely different things!
As you can see the posted image in detail, we are looking for things that can coexist with Tandem bar and arrive at Colle
It was kept waiting for about a month, I finally arrived and opened it and was amazed!
At first I thought that there was something wrong, but it seems that Manufacturer up-dated the goods themselves for some reason... I already decided to use it because I already have SHAD's Case on hand.
The commodity itself is exclusive for flowing water Fittingetc. There is no problem, I feel that the sense of unity with Case is very good including wearing.
When attaching the Base to the Carrier department, I think that there is no particular problem although it requires a little power work.
Coexistence with the Tandem bar is impossible, I think that it can be very appreciated that I try not to feel uncomfortable as much as possible, such as using Plate.
I urge people who are considering purchasing from now on to take the above into consideration.
View detail
Fits: SUZUKI BURGMAN 200, SUZUKI BURGMAN UH200, SUZUKI BURGMAN UH125, SUZUKI BURGMAN 125R, SUZUKI BURGMAN 125
I am using it without problems
I think that we support Rear's Case in terms of weight tolerance. SHAD SH 40 RearCase is on board but there is no problem.
It is a place to drill a hole of 16 mm in diameter at Rear's Cover, but the position to determine the center of the hole is marked on the paper, but once you have installed the Carrier by yourself, screws are placed in any position of the Rear cover I think that it is better to open a hole after passing or fixing the position.
I drilled a hole as shown in the drawing, but it was slightly off by a few millimeters and I got a lot of sharp edges in the hole.
In the future, when you replace RearCase, it is limited to SHAD, but it will be inevitable.
View detail
Fits: SUZUKI BURGMAN 200, SUZUKI BURGMAN UH200, SUZUKI BURGMAN UH125, SUZUKI BURGMAN 125R, SUZUKI BURGMAN 125
Although it is expensive, it is so simple and firm
It is attached to the top box of GIVI.
Simple shape, SHAD, KITACO, GIVI was good, GIVI was good, but it was sold out and the stock was undecided, so I bought it at an ambition to know that it is expensive and holes unknown and worst drilled. (KITACO is load-resistant and Out. Although SHAD ended unknown to the end after all, if CaseManufacturer it was probably Large durable - - )
Mounting is the same as the other, with 18 holes in the car body and fixed with Bolt M8. As I saw in the picture, I forced the hole of Base somehow (I screwed it, but it was not processed. Bolt of fixed body of the picture is changing to SUS in the mood but attached comes with ordinary Black.
Just at Seat in this position fingers Quantity : I think that 2 pc is just good to enter.
For reference, I can work on Wiring as a plate for a hole to be drilled, so I think that one who wants to mess around with it is good.
Stop-lamp is + (Black line on White ground) , - (White line on Black ground) is. Trunk bulb can also be exchanged here, the 2016 formula was ordinary Wedge Bulb.
I think that it may have been good to change to the SHAD top case as it is thought from now.
However, BURGMAN 200 less information - -
View detail
It is only for BirdCity, easy to install
It is heavily surprising and it is quite sturdy.
In the picture of the item description, it looked like a thin plate, but it is an iron plate that seems distorted unless you use it with Hammer.
The hole through which Bolt was passed was accurate and perfectly positioned.
Of course the holes in the Tail cover are necessary, so please make a hole or prepare an open Cover.
Instruction Manual is A4 paper Quantity : 1pc. It is concise content.
Even if English version can not be read, Illustration alone can fully understand.
Recommendation for people using BOD of SHAD.
If you also use GIVI etc., I think that it is better to install a carrier as usual.
View detail