Reviews
Focus on appearance….
I bought it because I thought it might look cool.
Hose Band may be easier to prepare separately.
View detail
Best Value Oil Catch Tank Kit for the Grom
About quality and texture: I am happy with the quality of the oil catch tank set from Endurance. The catch tank and mounting bracket are made from stainless steel with a polished surface finish on the catch tank. Various other parts included to complete the installation. About the feeling of use: Quite a lovely looking setup and it looks impressive mount up on the side of the engine while also removing oil vapour from the crankcase breather hose which leads less oil being burnt up. Products to buy together: Endurance offer many products for the Grom and their oil dip stick would also be desirable to purchase alongside oil catch tank set to help complement the finish in this area. Difficulty of installation: The process to install takes about 30 minutes. Remove two of the crankcase cover bolts and then install the tank mounting bracket, fit the rubber and catch tank to the mounting bracket then secure with the included zip ties. Disconnect the OEM Honda crankcase breather hose from the engine and connect to the catch tank and then install the included hose from the engine breather to the catch tank. Not difficult to do. Cost performance and comparison with other products: Great costing as you are getting quality materials in with this product and a simple design that just works as compared to the more complex designed setups from Kitaco at a slightly higher cost and the setups from SP Takegawa at a extremely higher cost. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Endurance offer this oil catch tank set in three different models which depends on the style of the right side crankcase cover shape, so be sure to select the correct model to suit your Grom. View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
It is amazing how much water accumulates.
【Review】
Originally, these parts were designed to prevent oil blowback from the blowby, but this time they were installed to improve a pre-existing condition in which moisture from the blowby gets mixed in with the oil and emulsifies it.
It is amazing how much water accumulates.
[Satisfaction.
Relatively reasonable price and natural mounting position.
I left the work to Shop, but I don't think any particular expertise is needed.
Complaints.
The clamp of the drainage cover is too tight and cannot be detached without pliers.
If water accumulates this much, it would be more convenient if it can be drained more easily.
View detail
ENDURANCE Oil Catch Tank Kit
About quality and texture - Top quality. Really nice polished finish on this very compact stainless steel oil catch tank. About the feeling of use - It is a basic designed oil catch tank kit that does the job while looking good and not taking up too much space in the process. Products to buy together - There is no return hose or breather cap for the clutch cover included in this kit so that would be a few items you could also purchase if you are looking to vent the engine a little more and also return any oil back to the engine. Difficulty of installation - It is very simple to install this kit from Endurance as everything can be access without removing the fairings. You'll have it completed in 30 minutes. Cost performance and comparison with other products - Best value oil catch tank kit around for the Grom and Monkey 125 but it is a basic designed kit and some of the other brands do offer at a higher price an oil return to the engine and even an addition vent port for the head. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - From my research it you want the best oil catch tank kit for your Grom and don't mind paying top dollar then the one available from Takegawa is what you want. View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
Satisfied with Cospa
Satisfied with the cosmetics compared to other Catch tanks.
I felt it would be better if there was some processing such as changing the length of the Pipe in the Catch tank.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
It's also good for dress-up.
I have been draining the Drain on a regular basis as it collects quite a bit of water. This seems to help.
I'm happy with it because it looks parenthesis good as a dress-up.
As a precaution, I installed it in the same location as the air cleaner, because it would interfere with the Takekawa Power Filter, which could not be installed in the same location as the instruction manual.
View detail
With moisture removal measures
Grom's Purchased to prevent emulsification of engine oil
I'm not sure if mine is a genuine chrome one. Because I have changed the crank cover etc.
If it doesn't stick, I give up.
I've been looking at a lot of stuff, but the one for the Z125 looks like it'll fit with a little modification!
I bought it because I thought
I'm going to make both of the holes in the stay about 2mm long and put a 20? spacers on top.
I went to Home Depot and bought an oil resistant I was able to put it on with no problem.
The only thing is that the word Endurance is reversed and you can't see it, but it works fine.
Grom's customization Only the engine right side is flashy.
Left Side tends to become a lonely feeling. Oil catch tank By putting
A little accent, lol.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
Cool and cool!
The products of major CustomManufacturers such as SP Takekawa and KITACO and Compare and contrast the exclusive design of the car models to see if you like the installation location and design This was the deciding factor in my purchase
As for the difficulty of installation, it is relatively easy to install as the instruction manual is also carefully written It is
When installing, it is important to refer to the instruction manual for parts and see where to put them Point, all you have to do is to assemble it according to the instruction manual
After installation, we are not going to show you the performance of the oil catch tank because we don't have enough time is a manufacturer who is also active in races, so it must be a high-performance product I think And the best part is that it looks cool and nice
I don't feel disappointed, but what I would like to see improved is for the hose clamp of the return Oil Cap to be I would appreciate it if you would consider improving it because it takes some time to install the small design
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
In the winter season, you'll get water unexpectedly & can be attached to the OHLINSReserver tank!
I put it on to counteract the emulsification of the late MODEL
I have also put on the OHLINS Rear shock, but the Shock's Reserver The tank was set up to be attached to the same place as this oil catch tank, so I was in trouble I..
I've been considering various ways to shift the oil catch tank or the reservoir tank The bracket of the reservoir tank of OHLINS is more robustly made It was determined that it would be difficult to divert the oil catch tank to other parts, so the oil catch tank was turned to Right I decided to put it on the Left Side instead of the Side
As a result of various tests, the Bracket is processed and attached as shown in the photo, it does not interfere with the foot We were able to set it up in the Best position as a drainage measure!
hang
Process @Bracket in a way that extends it
Cut & Drill holes with Grinder for the upper bolt holes @ the top SmallBolt to secure it
@ the existing Hose (which will be in against the Oil catch tank) and the attached Hose (which will be in against the Oil catch tank) (Out), i.e., if you swap In and Out, you'll be able to get away from the Right Side installation I'm glad I was able to replace the Hose length with just the right length for the Left Side installation
Ad, because it is inconvenient to use it as a Drain of water in the attached transparent Cap DAYTONA (DAYTONA) InlineFuel Cockφ616624 I processed it to be able to drain by one twist when necessary by attaching a
The texture is good, and it's surprisingly watery in the winter months, so I'm convinced that it's, well, functioning and I'm not complaining!
View detail
I don't think it's a bad thing to put on
This is the first product I received after delivery and I can't almost tell the difference between it and the NORMAL, but I thought it was good It is
With the installation, it comes to a place where the Engine Guard is almost impossible to attach However, since it is quite noticeable in the place, the feeling that it is tuned will come out
View detail
Attach to KSR 110
It is compatible with Z125 PRO, but KSR 110 (2013) Since the engine shape is almost the same, I purchased it by stepping on the Large durable and installed it.
Results can be installed without any problems, and both performance and appearance are satisfied.
The reason for purchasing was to change the carburetor to Mukawa river VM 26, because it no longer uses OEM's Air Cleaner Box and Oil catch tank is required separately.
Because KSR 110 exclusive goods were not quite so, I tried buying it with no good but it was good.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
Is it good?
Purchase from User's comment. It is unknown whether it is the measure against emulsification. Every day, because of about 35 to 36 km running, oil temperature rise as it is. In the winter, I catch quite a lot of water, so if you think that it will mix with that much in the engine oil,. By the way, it is essential that draining is pretty much drained in Drain of dandruff, and every day if it is in winter, because it is essential that a longer DrainHose or Cook is needed. View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
Purchase for emulsification measures in winter.
It is unknown whether it works effectively as an emulsification countermeasure. Because I use it for commuting to 35 kilometers over and over, the engine oil will rise so much. However, since it catches quite a lot of water when it comes to the wind field, from the viewpoint of quantitatively entering the engine oil .... View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
Firmly function
Replacement is OEM Product, Oil catch tank with Exclusive Bracket.
In addition to Tank Body, Instruction Manual Blacket - Rubber board Hose - Clip - Tube - Tube clip - Tie wrap is attached.
Because it is a special item, it is safe to fix it tightly even after installation.
Although special processing is unnecessary, since Clip is Tight and the attachment part is narrow, Pliers for Hose clamp (Radio pliers are also acceptable if not available) If there is, it seems that it can shorten the working time.
If the oil temperature continues to increase after installation, it will be easier to stay in the BreatherDrain section, so let's take a look at those who are worried frequently.
View detail