Reviews
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI GSX1300 R Hayabusa, SUZUKI GSX-R1000, HONDA CBR600RR
Material:Aluminum and high quality product.
[How is it used?
I installed the Mount bar on my SEROW250 and it was so convenient that I wanted to install it on my SV650X.
I knew that SV650X can use Stem shaft fixed type as well as Mirror Holder installed type because of Separate handleType, and I thought it would be better to use Stem shaft inserted and fixed type. I found this product on sale, so I jumped on it.
How did you like it?
The bar is made of machined aluminum, so it has a sufficient texture. To be honest, if you attach a smartphone holder with a large size, you will not be able to see the bar part, which is a waste of space.
I bought the Silver one because the Black one was temporarily out of stock at the time of purchase. I am satisfied with the functionality of the product.
The product was more than Image.
How did it compare to other products?
This type is inserted into the hollow part of the stem shaft and fixed with a bolt, so it looks like a reflex.
The price is relatively low because it is on sale, and the quality is perfect, so I feel that Timing did a good job in purchasing a good product.
[Points to note]
The bolt for fixing is included in the package, so you may be able to adjust the height by inserting the collar up to 10mm.
Quantity in an easy-to-use Position:Once set, please tighten it firmly and securely with the proper Torque. (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
Material as mentioned above.:The deciding factor was the Reasonable price for an Aluminum Mount bar.
【Included Parts:presence or absence】.
Quantities of Mount Bar Body, Aluminum Collar to insert into the Stem shaft, Bolt and Nut for fixing, Fixing Collar with large outer diameter by tightening, and Instruction Manual.:Set
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
This was my first time using Manufacturer's products and I am very happy with them. Good products at affordable prices. Thank you in advance.
View detail
Fits: HONDA CBR600RR(07-09), SUZUKI GSX-R1000, YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI GSX1300 R GSX1300R HAYABUSA
Easy to install and securely fastened
I found this product when I was looking for a small mount bar instead of a large mount bar.
Installation was very easy and they are securely fastened in place, so there is no sense of insecurity and they are in good working order.
The bar itself is carved with grooves, so it is difficult to gap the fixtures to which it is attached.
I only use Kaedear's Smartphone Holder to attach to the bar, so the size was sufficient for me.
There was no interference when the handlebar was cut off, and it was a product that could be recommenedation.
View detail
Fits: SUZUKI GSX-R750, BMW S1000RR(10-13), KAWASAKI ZX-14R, KAWASAKI ZZR1400, SUZUKI GSX-R1000, SUZUKI GSX-R600
Unobtrusive Mount bar
I bought a used GSX-R600 K6 and was looking for a mount bar since I was using my smartphone as navigation and found this product.
Installation was very easy and I like the one-sided design.
As a result, it did not interfere with the keys and was a good purchase.
In the picture it looks like it is covered by the Speedometer, but it is perfectly fine while driving.
It is an Image with Meter on the phone.
I was also a little worried about interference with Cowl and Screen, but my fears were unfounded.
We are also planning to add USB, but there is extra Space that could be installed right next to the Smartphone Holder.
It was a good purchase
View detail
Fits: HONDA CBR600RR(07-09), SUZUKI GSX-R1000, YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI GSX1300 R GSX1300R HAYABUSA
You can use Small Type for recommendation.
The other company's one is good for attaching two or more devices that can be Large, but it is not good for a smartphone. I was looking for the Small type because it's too big. It's easy to install because it uses Stem. View detail
Fits: SUZUKI GSX-R750, BMW S1000RR(10-13), KAWASAKI ZX-14R, KAWASAKI ZZR1400, SUZUKI GSX-R1000, SUZUKI GSX-R600
For Separate Handlebars with Quantity at the front:Mount bar that can be set
In the case of Separate Handlebars, you can use the phone as a Quantity:Mount the Mount bar to set
Most of the time, the Mount bar is attached to the Stem Nut by tightening it together
But...!
This product uses the Penetrating Hole in the Stem Nut to attach the bar to the bar
Quantity bar in front:The advantage of this is that you can set
It makes it possible for me to..
SmartphoneQuantity:The phone is covered by the meter when it is set and reads
No more problems that make it hard to use
In addition, the bar in front of it gives you a great deal of freedom in terms of the angle of attachment
Quantity in plain view:You will be able to set
The length of the bar is just right to fit a smartphone + USB power supply
You can choose between Black and Silver, so choose Black
The best part was that I was able to get my phone to Quantity:Set
The smartphone holder is positioned just right from the front without popping out
The phone is Quantity:What you can set!
This eliminates the loosening effect of wind pressure, so you can rest easy
Quantity the phone:We can set it
I don't have a manual for it, but I'm using a Bolt1 pc to tighten it up
No installation difficulties
Just be aware that the diameter of the hole differs depending on the model of car
In case of SV650/SV650X, Stem Nut hole is Φ17mm
Mount bar is common Handlebar diameter & Phi;22mm
He went in with no problem
I'm just tightening it up with a Bolt1 pc
Periodic tightening is necessary!
This is the same for any component
View detail