Reviews
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000SX
For Smartphone Holder installation
I bought it for Navigation and Smartphone Holder installation. View detail
Fits: HONDA Super Cub 110 Pro, HONDA Super Cub 50, HONDA Cross Cub 50, HONDA cross-cub 110
Mount bar for CROSS CUB
I found this product when I was looking for a mount bar to attach additional meters.
Since the installation was requested by the Shop, the details of the installation method are unknown, but it appeared that the Meter panel was removed and this product was co-tightened using the included Bolt.
The bar is now in a position that is very easy to see when driving.
Attached to the bar is an iPRO ShiftIndicatorAPH8 Red ・ SP MukawaΦ48Small DN Tachometer 12500rpm (with Rev indicator) ・ NeoFACTORY48mm Voltage Meter White Panel Stainless
When installed at the same time as the KITACO Neck Cover, modification is required for either one of them due to interference. (Modification of the Neck Cover is recommended.)
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Ideal for BOLDOR
CB400SB (2014) Unlike the Handlebar and Handlebar Brace, it is positioned above the Meter, which makes eye movement easier. The texture is firm and the paint job is satisfactory. The only caveat is that the Cowl mirror must be removed before installing the monitor. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000R, HONDA CBR1000R
For Attachment installation
I installed it for a phone mount and USB power supply.
I have no complaints about the Size feel or shape, but the texture of the product was a bit cheesier than I had expected.
The SC77 has a beautiful OEM handlebar area, so it is a little disappointing that it is hidden from view.
Considering the price, it is totally acceptable, and the purpose itself is accomplished, so I would give it 4 stars overall.
View detail
This is a must.
Product Name
KIJIMA KIJIMA Handlebar Mount Bracket
Item Number
204-0683
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
Because it looks Stylish.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It's easy, just remove two Screws.
How was your experience with it?
I think it is easy to use and visible.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Processing is necessary for installation
The bolt that came with the kit did not fit the screw holes, so I extended the holes in the bracket with a drill to M7, but could not install the bolt.
I installed it with an OEM bolt and it fits the screw hole. (I think the upper side of the OEMBolt was thicker, so it fit better and had a Screw hole.)
I put it at 2 because it needed processing even though it was an exclusive product.
2019 CB400SB (2BL-NC42) is
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000SX
Installation is fine, but ….
The Handlebar Mount Bracket was installed without any problems.
However, because my body is not large enough, the Handlebar was squeezed inward, making it impossible to mount.
I would suggest you to match the body to the car body and then choose other PARTS.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
Mount bar for easy eye movement on Meter
Installed on a BirdCity155 2023.
This product allows 22.2mm bars to be added on the Meter and is compatible with Long Screen made by Y's Gear as well as OEMScreen.
Other products were available that use Mirror and are added in front of the Handlebar, but we chose this one because of the ease of eye movement when a smartphone or additional meter is installed in place of Navigation.
If you want to install something that is not relevant during the ride, such as a PET Bottle Holder, you should purchase a product that uses Mirror for installation instead of this product.
The installation procedure is simply to remove the OEMScreen and Bolt On. There is no gap in the hole position, and it was easy to install.
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
The product was exactly as shown in the picture and there were no problems.
I installed it on my ninja250. It was easy to install and I am using it without any problems.
I installed the Smartphone Holder that I originally had. I am touring comfortably.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Easy to install and does not affect Handlebar
Since it is a SUPER BOLDOR, we did not want to attach various things to the Handlebar, so we chose the Type Multi Bar to be attached to the Cowl.
Installation on 2BL-NC42, but can be installed with Exactly.
When I first saw it, I was worried that the holes would not engage, but after stopping and adjusting the One Side, I was able to find a Point that just fit, and it is securely attached.
I thought that the installation might produce Chatter, but the impression is that it actually increases rigidity.
Currently I have a Smartphone Holder (with charging function) and a 3Inch DriveRecorder.
This is the full width, but there is room for a bar, so those who shoot video, etc. could attach a Camera Pole or other device here. However, it may be difficult to extend the Pole directly above the standard Screen due to the angle.
I have changed to Zero Gravity's Sports Touring Screen so I have a little more room.
By having the Smartphone just at the same position as the Mirror, there will be less eye movement, which will allow for safer driving. Also, since the Handlebar area is not heavy, the Merit is that it does not affect the light Handlebar operation that is a feature of SUPER BOLDOR.
My one complaint is that the Screw is a little hard to close, I wish it was HX4 or 5 instead of HX3.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I was a little confused whether to mount the Handlebar Mount Bracket on the Handlebar side or on the top of the Meter, but I chose the type that I could see while riding. I used it twice on a touring trip and it was very easy to use. I don't mind even if it rains a little. View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I think it is better than Handlebar because you can mount the phone on top of the Meter so it is within view and you can drive without having to be careful. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Not suitable for CB400SB!
I am on NC42Second Type Model (2BL-NC42).
Although there were scattered reviews that said it could not be installed, I bought it because I believed it was compatible with the product.
As a result, it was no good.
Even if you can get to a temporary fixation on one Screw, you can't reach Limit in place on the other side.
The Level is not possible to install unless the Cowl side is bent by force (probably to the point of breaking) or the Bracket side is bent or shaved.
During the trial and error process, the other Screw and Washer were dropped deep inside the body Frame and became missing, so we gave up on the installation.
Since the work was done the day after the new car was purchased, defects such as distortion on the body side are unlikely.
Some reviews say that it could not be installed even on the early NC42 (EBL-NC42), and I think it is not compatible with CB400SB in general.
It says that it is compatible with both KIJIMA and Webike, but was the CB1300 used as the basis for determining compatibility?
I would like to see it properly verified.
View detail
Fits: KAWASAKI Ninja ZX-6R ABS, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R ABS KRT Edition, KAWASAKI Ninja ZX-6R KRT Edition, KAWASAKI ZX-6R
I didn't use the key side.
Purchased to mount SP CONNECTO's Smartphone Holder.
The key side is not used because the operability of frequently used keys deteriorates significantly.
The paint on the Black is also weak and has partially peeled off due to slippage.
I would like to replace it if there is another option.
View detail
Convenient for fixing your phone
[How is it used? Quantity of Smartphone Holder:I used it around Set.
Was the one you received as per Image? Yes
How was your experience with it? It is well made and can be used with other items that you want to mount.
[Points to note] nothing special
How did it compare to other products? nothing special
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I wish the Material was Aluminum instead of Iron.
KIJIMA or DAYTONA …
Since the Parts are basically for the same purpose.
It's all about what you use for Main.
In my case, touring with this motorcycle is a short distance, and ActionCamera is my main tool rather than using it with a smartphone attached.
The KIJIMA product is the front side of the Stem.
The bars of the DAYTONA model are placed on top of the Stem.
It looks like it would be in the way if it was on top of the Stem, and I like the Kijima one that is about the same height as the Stem and can shoot from the Screen.
I chose KIJIMA because of its high quality.
Since it's just a steel rod with a bracket, it would be nice if it was more reasonable.
And the bolt enclosed for installation is a stainless round plate, I think it's called? It's a bolt with a low head.
We're going to replace Stem's bolt with this one.
The part where the hex is inserted is shallow, so it's easy to lick, and you can't fasten it over the torque.
LargeI'm sure it's sturdy, but I'm a little worried about not being able to tighten the stem bolt properly.
Also, and this may be selfish, but if possible
I wish it was aluminum with anodized finish!
So I give it 3 stars for cosmetics.
View detail
Handlebar Mount Bracket
Compatible with Pipe diameter 22.2mm, convenient to attach Smartphone Holder.
The material is Steel, and both sides are firmly fixed to the Handlebar for stability.
It is adjusted to Handlebar height and I have no problems with visibility, nor does it bother me while driving.
(It is adjusted to the height of the Handlebar, but because the Handlebar is tilted, it is higher than the Handlebar.)
View detail
Fits: HONDA Super Cub 110 Pro, HONDA Super Cub 50, HONDA Cross Cub 50, HONDA cross-cub 110
Good but painful
It is indeed a handlebar with good quality. However, it is not easy for unprofessional to have the job done. You don't just loosen a few bolts, then attach it to the bike. The speed metre has to be uninstalled first. The uninstalltion of dashboard is the real pain. You have to remove the two bolts under the dashboard in the plastic container. Since the dashboard is still attached to lots of wires, you cannot just lift it up, so you have to removed the two bolts in a gap between the dashboard and the container. There is one more to mount the container and the bike, somehow, handlebar lifts up the entire container, so you won't need that bolt anymore. While tightening the bolts, make sure have the bolts fixed, then screw the nuts, so that you won't lift up the bolts. Hope it helps. View detail
Things are good, but expensive.
If you have a Hexagonal Wrench, even a beginner can install it.
It's an Exclusive Design, so it's easy to use, but it's expensive.
Also, the included Bolt rusted quickly.
The Multi Bar of De*tona is Matte tone, but this one is glossy.
View detail
Refreshing around the Handlebar
[How is it used?
It is used on the top of the FrontMeter.
Was the installation difficult?
It is easy to install if you follow the Instruction Manual.
How was your experience with it?
When you clamp a heavy object to this Bracket, it will shake with vibration.
[Was there anything that disappointed you?
If it can be fixed a little more firmly, I think it will not shake even if I clamp a heavy thing.
[Availability and clarity of the Instruction Manual
There is an Instruction Manual. It is easy to understand and you can complete it by following the instructions.
View detail