Reviews
It's nice
I bought a used TRX850 that was a Fender Eliminator with a Silver T-Bracket and a square Reflector.
The bracket is black and I like the shape of the Hexagonal, so I bought it.
It's better now. If I could do a little more reduction in cost, it would be great.
View detail
Reflector kit
I used it on my GROM Fender Eliminator. View detail
Bracket is a bit short. Crying
I had to replace it due to a fender bender. (Reflector is Repeat)
DAYTONALicense Plate Holder99662 and Quantity as per the accident estimate made by Motorcycle shop.:I was compensated by Set and did the installation work myself.
Quantity in DAYTONALicense Plate Holder99662:The top of the Reflector square will interfere slightly with the top of the Reflector square when it is set, so you will need to modify it in some way. (The height of the outer frame of the License Plate Holder is less than 2mm higher. Is it compatible with the new standard?)
Reflector is blameless. (Lol)
View detail
Fits: Others Medium size car and over (126cc-)
make an attractive appearance
I bought this with the introduction of Fender Eliminator.
If you use the Fender Eliminator, you can see the Reverse side of the Number.
If you use this, you can kill two birds with one stone because it looks much better and it has Reflector.
Material is not resin, but Material:It is aluminum and has a little weight to it.
The Fit feeling is also good and I recommend it.
View detail
Exactly
I replaced the Tail lamp with DRC's Mo Tread edgeTail and installed it together.
Installation is easy
The size is small, so the Tape area was refreshing.
View detail
Good quality
This is Second time to buy it. The first time I bought a big one to my Msx125, now since nsr80 is a small car so I buy it and fit it with the small number board. The quality is still good and the size is very good as I want. I am so happy to get it. View detail
Design is good.
Since I installed Active's Fender Eliminator Kit, I also installed Reflector.
It has to be made by Active.
I decided to go with this one, which is slim and has a nice style that other manufacturers don't have.
Once I put it on, I don't feel like putting on another company's.
View detail
I didn't want to eat it.
I used to have a square Plate with an OEM Reflector on it.
One day I was looking at the Number for some reason and I thought it was too large and uncomfortable.
I remember this elongated Type
I didn't want to use this Type because so many writers use it.
I've been using it for a while now, and it's been going pretty well, and I didn't like it.
I'm sorry (Lol)
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI W3/650RS, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Perfect for USDMSpec.!
I bought this to make it USDM style?
Parenthesis is better?
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI W3/650RS, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Perfect for USDMSpec.!
I bought this to give my Scooter a USDM look.
Parenthesis is better?
View detail
Slim reflector with safety-standard spec.
What made you decide to buy?
Active's Fender Eliminator Kit does not come with a Reflector (Reflector); without a Reflector (Reflector), you cannot drive on public roads, so it had to be purchased separately.
How was your experience with it?
The Active reflector kit is designed for the Active Fender Eliminator Kit with the license plate angle of 45° to vertical. The Active reflector kit is designed to reflect the license plate of the Active Fender Eliminator Kit at an angle of 45° to the vertical plane. when the Active reflector kit is used with an OEM Fender or other manufacturer's Fender Eliminator Kit, the reflector angle may not match and the reflector may not reflect properly. In this case, you cannot drive on public roads due to poor reflection.
[Regarding installation]
Anti-vibration material is attached to SlimReflector Bracket. This is to reduce the vibration with the Number or NumberCover while driving. Unexpectedly, vibration is transmitted to the rear, and unpleasant vibration sound can be heard even through the helmet. When I installed the Fender Eliminator and Reflector, I was wondering where the noise was coming from, but it was dark under the lamp. It was caused by the contact and vibration by NumberCover and Reflector. Just to be sure, ZX-6R as well as GROM, measures are taken, but the anti-vibration material Because it is not attached, separately, it is necessary to prepare. When you buy it, you can get it at the nearby home center.
View detail
Parenthesis well to be a legitimate Fender Eliminator.
good point
Reflector is Sharp and Parenthesis is good.
Reflector is sturdy with screw mount
A bad point
The mud bounces around a lot. (It can't be helped.)
Parenthesis well to be a legitimate Fender Eliminator.
The Reflector that was attached to the Fender Eliminator Kit on the Grom Fender went away, and I thought about gluing the Reflector back on, but I thought it would fall off again someday, so I bought this product.
I bought it because the shape of the reflector is sharp and has good parenthesis, and the reflector is screwed on, which makes it hard to lose.
I did some off-road driving, but the mud still splattered all over.
I thought about using it on top of my slashed Grom Fender, but it interfered a bit and made a mess, so I decided not to.
I am very happy with this product.
View detail
To Fender Eliminator Kit
It's a little out there.
To Fender Eliminatorize the Monki 125.
Used.
To SSKFender Eliminator Kit
License PlateFrame by DAYTONA
I tried to install the
I bought it in a hurry because I couldn't install it.
It's Limit, but I was able to install it.
I'm relieved.
View detail
Don't forget about the Fender Eliminator!
I bought it later when I noticed that the Fender Eliminator Kit I used didn't have a Reflector.
It's just a small measure under the Number, so you can keep it from getting in the way of Style as much as possible.
Reflector is included in the safety standard to pass the vehicle inspection, so if you don't wear it, you may fall prey to White bikes due to poor maintenance.
It can be installed in less than 5 minutes.
View detail
Fender Eliminator for New Model GSX1300R HAYABUSA
[How is it used?
It was installed for the Fender Eliminator of New Model GSX1300R HAYABUSA.
The Fender Eliminator Kit is used here.
Fender Eliminator Kit with LED Number (https://www.webike.net/sd/24654857)/(e.g. "I'll be back")
I didn't have any colors, so I put Silver Reflector kit on Black Fender Eliminator Kit, but it's a little bit floating, so I think I'll paint it with Spray Can soon.
Was the one you received as per Image?
I was able to mount it securely because it is from the same Active.
The only problem is that the Material is a bit flimsy and cheap for Slim.
But it doesn't look like it will distort that easily, so we'll see.
Was the installation difficult?
Because I installed it with Fender Eliminator Kit, it is not that difficult to work.
It is more Large strange to peel off the Cowl like the parquet of GSX1300R HAYABUSA to install it.
There is no Installation Instruction Manual for this product itself, but I had no trouble installing it because the Fender Eliminator Kit mentioned above had a fairly detailed Instruction Manual.
How was your experience with it?
It works fine
[Included Parts:were they on?
It was not attached specifically.
[Was there anything that disappointed you?
Webike didn't have Black in stock by chance, so I bought Silver and it was cheaper than I thought it would be.
It's easier to paint because it's plain, so maybe that's a good thing?
View detail
Used with Fender Eliminated KSR80
I bought this product because the KSR80 I bought used was Fender Eliminator, but it did not have Reflector.
You can install it between the License Plate and the Bracket without any problem even if you are a beginner.
The price is right for Universal and the quality is a bargain.
View detail
Stylish
[How is it used?
I used it on my XJR1300C. I'm running it with a Rizoma Fender Eliminator Kit.
The Reflector that originally came with it was too large, and I started to feel uncomfortable, so I replaced it this time.
Was the one you received as per Image?
The image is generally correct. However, I feel that the angle of the bend of Reflector is a little too strong.
It would be nice to have a few different angle options like the ones made by DAYTONA.
Was the installation difficult?
All you have to do is loosen the two License Plate Bolts, insert them, and tighten them together, so it's not difficult.
Depending on the combination with the Fender Eliminator, the length of the Bolt may be insufficient.
The thickness of this product is roughly 2mm to 3mm. If the length of the Bolt is about Exactly as it is now.
It is recommended to use Screw lock to tighten or replace with a slightly longer Bolt.
How was your experience with it?
The look is certainly cleaner and more Stylish, so it has served its original purpose.
[Included Parts:were they on?
There is none. Everything was as shown in the product images.
[Was there anything that disappointed you?
I thought the angle was a little too tight for my Motorcycle Fender Eliminator.
DAYTONA's Reflector has a few different angles to choose from, so in some cases this may be a better choice.
I chose the Active product this time because the design of the Reflector itself was sharp and had design characteristics.
View detail
Refreshing
It is not noticeable and looks like Refreshing. View detail
Fits: Others Medium size car and over (126cc-)
The large size of the Reflector is not too large and looks good.
Simultaneous installation with Fender Eliminator made by HURRICANE.
I bought this one compared to the Reflector only product, and it looks good from the Reverse side, and I'm glad that the back of the Number is covered so it doesn't get dirty along with the strength.
Even the NORMAL Fender was covered in mud behind the Number, so it will be easy to wash and clean the car.
Reflector is not so good at attaching Double-sided Tape, but I think it's large and strong because 3M is quite firm.
View detail
If only it were a little cheaper
Front sideQuantity of mopeds to improve visibility when riding at night:Pair (for Left and Right) I installed it in
I was surprised that it was brighter than I expected when it was reflected in the Light.
It's such a small part, but it gives me more peace of mind.
But it's a little expensive; I'd appreciate it if it was under 500 yen.
View detail