Reviews
Rossi
[How is it used?
I always put this Grip on my for On Road vehicles. I have no complaints and Rossi loves it.
Was the one you received as per Image?
I received a Grip that I am familiar with because I use it all the time.
Was the installation difficult?
Cut and peel the old Grip with Cutter to remove the adhesive.
↓
Degrease and apply reliable and proven Cemedine SUPERX.
↓
Fix with Wire after inserting
I always do this.
As for wire, I am interested in Unit's Safety wire (https://www.webike.net/sd/23616697/) because it does not explode in the tool box.
Wire Twister Pliers (Auto Return Type) This is what I use (). (https://www.webike.net/sd/544991/) It is not a tool that will break, so buy it once and it will last a lifetime, so buy it.
How was your experience with it?
After all, a new Grip is nice. It is a part that is constantly being touched, so it is a good idea to replace it on a regular basis.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Think carefully about what you do with the Wire you tie in Twister. Sometimes I see people who tie their hands in a direction and place that kills them.
View detail
RossiGrip
RossiGrip is indeed HondaOEM Parts. View detail
Grip replacement
This is a replacement from the original Honda OEMGrip.
The price is reasonable for HondaOEM, the design is better than the original OEM, I like it.
The grip is not bad.
View detail
You'll know it when you hold it.
Valentino Rossi loved the RossiGrip.
It is true that the RossiGrip has a chewy grip that other grips do not have. And yet, it does not interfere with the road surface information transmitted by the front wheel, and the Control can also operate the Accelerator with a moderate grip force.
The color is pure black and the design is not outstanding. It may look like a bland OEM product, but once you hold it in your hand, you can tell that it is a Grip with a special attention to detail.
View detail
Grip is good and easy to use.
Standard installation Grip for CB/CBR series.
I was using too much grip strength without realizing it because I had a light grip with winter gloves that were not easy to handle and kept slipping back when I opened the throttle. I am now using this for all my Motorcycles.
The exquisite softness of the rubber may be the reason for the good grip, but the amount of grip loss is quite small, and there is little change in the feeling of grip until the end, when it has worn off. This is probably due to the fact that the grip is earned by the quality of the rubber, rather than relying on the shape of the surface, such as the file grain.
Other brand products with good bite, such as Pro grip, have good vibration absorption and other performance, but many of them do not have good durability. "Have." We recommend this one, which is followed by
View detail
RossiGrip
It looks and feels good to wear!
Installation took about 30 minutes and was no problem.
View detail
I'm feeling Rossi.
Also known as RossiGrip.
The YamahaOEMRight SideGrip has numerous protrusions on the throttle tube that bite into the tube to hold it in place. Therefore, I thought that the side grips would be too bumpy if they were left as they are. So, I cut off the protrusions with a cutter and attached it with glue. There is no discomfort.
View detail
I'm feeling Rossi.
Also known as RossiGrip.
Fee Ring is basically satisfied with the same as Left Side.
The Yamaha OEM Right Side Grip has numerous convex protrusions on the throttle tube side and concave concavities on the grip side, which bite into each other to hold it in place. Therefore, if you attach a smooth-surfaced grip as it is, you will have a bumpy grip (?). So, for the time being, I cut off the protrusion with a cutter and attached it with adhesive. There is no discomfort.
View detail
HondaOEM
I was able to purchase the NORMAL Honda OEM Product for the replacement of the installation grips, but I decided to purchase the RossiGrip, also known as the RossiGrip, which has a good reputation.
I think it looks better than the shape, Grip and NORMAL.
I also bought Left together, but this one is a bit more expensive, which is no wonder since it is a HondaOEM Product.
View detail
I use it for Kawasaki.
After 2 years of use on Honda, I installed it on Kawasaki, which I bought more.
It feels a little thin, but surprisingly it doesn't tire me out!
PoshSolid Bar End And Quantity:I replaced it with a set
View detail
Good Grip.
Motorcycle is Yamaha, but I bought this Grip which has a good reputation. The grip is very comfortable and I can drive with confidence.
The work is not difficult, but since the OEM throttle pipe has an uneven surface to prevent gapping, we replaced the throttle pipe together with the OEM pipe.
View detail
RossiGrip The Right Side.
It was installed on a GPZ900OEMHandlebar.
Since it is 120mm as opposed to OEMGrip125mm
It is 5mm shorter than the previous model, but we are aware of this.
No problem.
View detail
Easy to use
I think it is easy to use. A friend of mine recommended it to me … I always use it. View detail
Highly satisfied HondaOEMGrip
[How is it used?
When I replaced the handlebar on my XJR400R, I decided to replace the grip as well.
Was the one you received as per Image?
The shape and design are close to the YAMAHAOEMGrip that had been attached, and it is easily recognizable from other CustomManufacturers such as DominoGrip, etc. I was looking for something other than the ones that are covered by other products and purchased this one.
The product I received was just like the Image and had a calming design and functionality.
Was the installation difficult?
Simply apply a thin layer of Handlebar adhesive to the AxelSlot, and thread the Grip through before the adhesive hardens. This was my first time replacing the grips, and it was surprisingly easy.
How was your experience with it?
The firm grip is quite good from everyday Touring to high speed cruising.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Instruction Manual:No
Items to buy together:Grip Adhesive
View detail
Don't be afraid of this one.
I chose this one without hesitation and replaced it immediately. It has a subtle tapered shape and a chunky feel that gives a good grip, but it is also very durable. It's similar to the one I had when I used to drive a Honda, but I guess it's different, and I think it's well thought out and advanced. View detail
The product is as good as its reputation.
The grip of 2021 model YZF-R25 is thin and hard, so I replaced it with this grip which has a good reputation on Net.
The process itself is simple, but as we all know the Motorcycle RightGrip has a raised surface on the plastic rotating part that engages with the inner raised surface of the OEMGrip.
The inside of this Honda OEM Grip is slippery, so there will be a lot of floating parts, and it will feel a little squishy when you grip it after replacement. There is no inconvenience, but it may bother some people.
Scraping off the bumps should solve the problem, but I'm not sure if it's worth it.
It is thicker than the YZF-R25's Grip, which I personally like because it reduces the vibration a lot.
The Left Side can be replaced with no problem at all and is very comfortable to use.
View detail
It's okay for a Touring.
The operation feeling is very good. The absorption of vibration is not good, but it is not a problem for touring about 200km. View detail
The texture is good
It has a moist feel and is recommended for those who prefer a system that absorbs into the palm of the hand. View detail
Famous RossiGrip The Grip feeling is nice too!
I think I've used it before when I was driving a Honda, but this time I used it on my Yamaha R1-Z.
The Grip feels like it's absorbing into your hand, which is a little more than I expected. "It's so nebulous. I can feel it.
However, it's definitely not slippery for that reason, and it's less fatiguing.
Many of the cheaper grips are slippery, and the perfect amount is good.
There is also a groove for wiring, so it can be recommended for sports type motorbike and race use.
View detail
It's not the Left Side.
This is one of the best grips I've ever seen.
It is not too assertive.
No complaints about durability.
I applied a thin layer of Bond and wired the two ends.
The OEM Grip was not Bonded, and unlike the Left Side, which was a huge pain, it came off easily and was replaced in no time.
View detail