Reviews
The construction is neither good nor bad, but not overpriced.
The difficulty level of installation is fair, the quality is neither good nor bad, and the price is a little high for the content.
The first step is to remove the OEMFender, but the Instruction Manual is wrong from the very first step.
It says two Bolt, but I have to remove four… I can tell when I see it, as you can see in the picture.
Assembly after removal is as simple as looking at the Parts.
I would have liked the shape and overhang of the License Plate Light to be a little more manageable.
Incidentally, the compatibility with KIJIMA's LED Blinker is subtle.
As you can see in PlateBase, the Small Type-ized Blinker seems to be quite hidden.
It may be necessary to shift the Number down or overhang the Blinker at the time of inspection.
View detail
Blinker overhang is a bit weak.
The degree of difficulty in assembly and installation is low, and as is typical of DAYTONA, the precision of the product is high.
Were there any changes due to the year in which some parts differed from the Instruction Manual?
The balance between law and design is good, but I feel that the design could be a little more aggressive.
What I'm interested in is Blinker's Quantity:Pair (for Left and Right) Amount of overhang.
When the company's License Plate Base is installed, the Blinker becomes quite difficult to see.
At the time of inspection, the Number must be shifted slightly or it may not pass inspection.
View detail
High quality, strength, and quality are highly balanced!
[How is it used?
Attached to my eldest son's beloved machine.
Was the one you received as per Image?
Image or more
Was the installation difficult?
Working with two people is a breeze!
How was your experience with it?
Satisfaction is plentiful
[Included Parts:were they on?
flawless
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Very satisfied. It is coolness max.
When replaced, it will look like a Large width.
Rear feels lighter.
A sense of condensed iron mass comes to mind.
When the License Plate Light is LED, the Rear is extremely bright.
Therefore, the Rear view at night is also cool.
Anyway, Tension goes up.
The Motorcycle Cover is now easier to put on and take off with less snagging.
View detail
Reasonable price
I honestly don't know if it is better or worse than the Fender Eliminator Kit from another company, but I think it is an excellent product in terms of cost performance. I didn't have any trouble installing it, and the wiring is just a matter of attaching the connector. I thought about how difficult it would be if it were a Universal Product made overseas. View detail
Parenthesis better but …
I happened to buy it cheaper at another place.
Installation is quick and easy once you understand it.
However, if you try to use it with the Tanax Plate hook.
Please note that it interferes with the Blinker, so be careful if you are an SV650 rider.
I am still searching for my own.
View detail
Slightly difficult to install
Since it comes with a license lamp and reflector, this product alone can easily be made into a Fender Eliminator.
When installing the bolt on the body of the car, a collar is inserted between the plates, but I had a hard time tightening the bolt in that condition.
Once the first one is tightened, the rest can be tightened stably.
The work will be done more quickly if two people do it together.
A thin hexagonal https://files.slack.com/files-pri/T04P7EQUR-F04AA9NJ1UK/1668052958985.jpgWrenchが必要ですがっPliersで摘んで締めてもいいと思います is used to fix the License lamp.
View detail
Appearance Refreshing
Depending on the motorcycle, I would never use a Fender Eliminator, but the SV650X is definitely more to my liking with a Fender Eliminator.
Only the final installation can be a hassle if you are alone, but just because it is a hassle does not mean it is an impossible or difficult task.
Refreshing appearance, but if you are thinking of changing Pillion Bar or Blinker, you need to check. Please note that some items cannot be installed.
View detail
Please be careful when you want to install Short Type Blinker.
[How is it used?
A little ride to Short touring within the prefecture with ChocolateChocolate
Was the one you received as per Image?
It was as Image because I bought it after confirming it with Webike's product images and impressions.
Was the installation difficult?
It is not difficult, but in my case, I replaced the OEMBlinker with Other Brand Product, so the Wiring relation was troublesome.
How was your experience with it?
Design and strength are fine, and I don't think anyone using OEMBlinker will have any issues with it.
[Included Parts:were they on?
License Plate Light (LED) is included in the kit.
[Was there anything that disappointed you?
If you install Other Brand Product's ShortBlinker at the same time as shown in the attached picture, it will be hidden by Number. Will it pass inspection? I checked. "If we don't shift the Number to the lower side and improve the visibility of the Blinker, the car won't pass inspection. I received a response.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Instruction Manual is very easy to understand with illustrations and I think it is no problem to install it by yourself.
The product itself is a very solid one, but those who are considering Other Brand Product's Short Type Blinkeretc. should be careful.
I can recommend this product to anyone who uses Normal blinker.
View detail
I feel safe.
Good texture.
Because I put it on the Large Threshold Motorcycle of vibration.
While driving, etc.
I'm just trying to make sure it doesn't break down or deteriorate or something.
I thought it would be sturdy, but...
I'm happy with it, it seems sturdy.
View detail
Refreshing!
When installing, it is a little difficult for one person.
I like the clean look of the product!
Also, I was able to attach KIJIMA's LED Blinker.
View detail
Fender Eliminator is the basis of Custom.
The Fender Eliminator from DAYTONA has less parts and lighter weight than the Active Eliminator. The Fender Eliminator is the basic of Custom, and it looks great! View detail
Perfect accuracy
I went to get it as soon as it arrived. I tied it to my motorcycle and took it home. I am very happy with the Exactly install on my bike. Except for the huge shipping box, it's the best I've ever seen. View detail
Fits well
Ordered this kit from Norway not long ago,delivery exellent.Part fits well, mounting dispite japanese langugage no problem the drawing is self explaining.Will of course order again from webbike.jp. I am very pleased:) View detail
The back that I was wondering about is clearer
The OEM Fender was quite present in the SV650, so I installed it to make it look nicer It was easy to install as per the Construction Manual Installation was easy as per the Instruction Manual I don't ride on rainy days, but when I ride after the rain, how much bounce is there? I'm curious to see if View detail
neither too much nor too little, but enough
I was able to buy the Motorcycle itself cheaply, so I put it on my previous car as well
I think this is nicer because the OEM felt like they did an ackanbe~
A stainless steel plate is inserted on the reverse side to prevent it from bending
I used Titanium for the NumberScrew (It is a diversion from the previous car.)
View detail