Reviews
it's the best
It is almost as good as OEMOption. View detail
very good
Very nice, but if the Gold net was Black, it would have been 5 Stars. View detail
reasonably good
I bought it because it is Adjustable. It is indeed adjustable and good. However, I feel that the extending part is a little unreliable. It would be better if it were a little heavier. Well, I think it is fine for normal use. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Twill weave glossy! Beautiful!
The product is so beautiful that it is too good to install as a Fender. (I would install it at all)
There was no shape error with the OEM Shape.
If I may say so, each Bolt hole may be slightly smaller than the other, so it is better to check before installation.
A word about the installation process.
GSXS1000 if you want to replace Front Fender, Rear inner fender and Chain Guard, 'Better to remove the Tire, or else.' 。
The Front Fender cannot be replaced unless it is removed securely.
Chain Guard is also impossible because there is a fixed Bolt around the back of the Rear Sprocket. I think so.
For the rear fender, there is one bolt near the side of the tire with a hexagonal wrench that cannot be inserted and turned with ordinary tools.
This time, I cut down the Hexagonal Wrench to the size that would fit in the gap and managed to turn and remove it.
I was able to do it without removing the rear tire, but it was strange with the Large tire. (Lol)
If I had a Kill that I could remove the Tire, it would be fine.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Satisfaction level is high.
Was the one you received as per Image?
This was the first time for us to use dry carbon parts, "I see... it's like this." It was like that.
Edge shape with a crumbly, crunchy, hard texture, you can tell it's handmade. not a Minus rating.
Was the installation difficult?
As per the earlier information, the holes on the Chain CoverRight Side are slightly misaligned.
It could be installed only by widening the hole horizontally by about 3mm
The Exhaust System side is fixed with Brake hose bolt.
[Included Parts:were they on?
They were all there.
[Was there anything that disappointed you?
nothing in particular
Other items that would be helpful
I cut the Mud Guard down to the point where it would not hit the Swing Arm when it was moved.
View detail
Fits: KAWASAKI Z H2, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI NINJA1000SX, KAWASAKI NINJA1000, KAWASAKI ZX-12R, KAWASAKI ZX-10R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX-II, KAWASAKI ZRX1100, KAWASAKI ZRX, KAWASAKI Versys1000, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z800, KAWASAKI Z750S, KAWASAKI Z750
A little uncomfortable. I soon got used to it.
I fell in a beginner Gymkhana and replaced it with this product.
The exchange takes about 10 minutes.
Shaft, Return spring, and E Ring are not included,
Reuse OEM Product.
Immediately after the replacement, I felt a discomfort (bump) because of the comparison with the OEMfootpeg,
I got used to it eventually.
Grip force is quite good. Even when shifting the foot position a little,
The resistance is different from OEMRubber. I think you will get used to this one soon.
It is a very good product, including its appearance.
View detail
It is easy to install.
I don't want it to function, but I am satisfied with the aesthetics. View detail
It is easy to install.
We are satisfied with the aesthetics of this component, although we do not want it to demonstrate functionality. View detail
Impressed by the high product precision
No problems with functionality or aesthetics, and smooth installation due to its high precision. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Beautiful top clamp for Z900RS
This Speedra handlebar clamp is beautifully finished in black and is an aesthetic and functional addition to my spark black Z900RS. It has the capacity to accept hardware which can be screwed in the two pre-drilled holes on the clamp. Very happy and super service and delivery from Webike as always! View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
GSXR1000 L4 Speedra
Replaced from NORMAL. I am satisfied with both the texture and operability. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB750, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400Four, HONDA CB250R, HONDA CB250F, HONDA CB1300ST, HONDA CB1300SF/SB, HONDA CB1100, HONDA CB1000R, HONDA VTR250, HONDA VTR1000F, HONDA VFR800, HONDA VFR1200F
No difference
I have a RedMain Motorcycle and wanted to replace it with a Red footpeg, but I couldn't find one that I liked, and when I was looking for one, I found this product at a great price. (Lol) I was worried about the sharp tip of the footpeg and the round tip of the footpeg, but I chose the round one. The OEM footpeg has rubber to prevent slippage, so I was concerned about the slippage, but I felt no discomfort. The installation was not particularly difficult, and the pin can be easily removed by removing the split pin, so just adjust the angle and put it back on.
Installed and running Quantity:Pair (for Left and Right) I put my weight on the "I" and it didn't slip. How does this feel when long touring or when it rains? Does it slip in the rain? I would like to know.
View detail
100% satisfaction Mirror cover
I was worried about whether it would fit the shape of the Mirror, but it did EXACTLY that! 。 I recommend it for a change in atmosphere. View detail
Cap to be fixed by ORing
As shown in the Title, installation on the vehicle body is simply by pressing and ORing. (Shift change side) The first side has a large diameter for fixing, so it seems to be firmly attached. The other side is small in diameter, so it still feels a little wobbly after installation. I hope it will not fall off. View detail
SPEEDRA Tank Pad Dry Carbon
The OEM tank pad alone would rub against the top of the tank, so we chose the inexpensive SPEEDRA pad for the tank.
I am satisfied with the easy installation using only double-sided tape.
Material:Carbon Style is also matched to the chassis without any discomfort, just like OEMCarbon.
View detail
Fits: HONDA CB250F, HONDA CBR1000S, KAWASAKI D tracker, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI KLX250, KAWASAKI Ninja 650, KAWASAKI Z1000 (water-cooled), KAWASAKI Z250SL, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI Versys 650, DUCATI 1199Panigale, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA GROM
Easily Customizable
The OEM Cap was the same color as the Engine, Black.
It was hard to tell where it was located.
Gold's colors are easy to see at a glance.
It looks classy and cool.
The texture feels good, but I won't know how durable it is until I use it.
I think it is not a problem.
It was the right decision to put it on anyway.
View detail
Screen bolt
Gold color stands out and looks cool!
ZrX1200 DAEG is the front side Quantity:The OEM is long for 2pc, but I was able to install this product without any problems!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
The build is very good
Mounted on a 23-year-old katana. I was worried about Daegu Gongdol handle balance.
I like it very very much. Fair weight and very pretty
It fits well with katana, so don't worry and order it.
The delivery to Korea is fast, but there is a little delay at customs.
I'm annoyed ----------------------------------------------- ----------- It was installed in the 23-year-old Katana. I was worried about Daegu Gongdol Steel Balans I really like it very much. The weight is suitable and very pretty It fits well with Katana, so don't worry. Delivery coming to Korea is fast, but it is a little delayed in customs I am annoyed Powered by Google Translator
View detail
Fits: KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI VERSYS1000, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-10R, KAWASAKI ZX-12R, KAWASAKI ZX-14R
It is easy to install.
When the NORMAL end is removed, it feels heavy and heavy, and I am glad that vibration countermeasures have been taken into consideration. View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZX-10R, KAWASAKI NINJA H2, KAWASAKI NINJA H2SX/SE
I am satisfied with the high quality and Large
It is a bit expensive compared to others.
The quality of the product is commensurate with the high price, so I don't think I will regret it. I used to install one from another manufacturer, but this one has a more luxurious feel and a better design than the previous one, so I will buy one from the same manufacturer the next time I buy a motorcycle.
Large Satisfied!
View detail