Reviews
It looks cheap but practical
When the item arrived, I thought it was crappy PlasticPlate.
I mentioned that you should use it in a flat place in the Instruction Manual.
But since I want to use is on the gravel, I can use it without problems if I use it with knowing to break. It was about dirty without break even after use.
Material : Because it is light, it's small, so carrying is no problem. I have not used it yet in the muddy, but I think that I can probably use it because there is also an area. Although it is cheap and it can be used as a disposable feeling, it is likely to be indebted for the time being.
I use it with BANDIT 1200.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://img.webike-cdn.net/catalogue/images/50737/22748760_1_TS.jpg)
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Ideal for soft road surface
If Normal muffler raises STAND, Limit does not hit Clearance. Since installation is Small compared to STAND, even if you hang it down, it does not enter. Although I was worried whether to cut or not, since the material is Aluminum, I applied Dustcloth so that scratches did not get into the STAND, and when I hit it with Praghan, I could install it. It is good to think about it because there is no play. View detail
Sitting sensation Imaichi
I changed from S1000XR to S1000R. I used Dimotiv when I was in front..
I could stop by just Screw and I was worried about falling. Because this item will attach Cover
I thought it looks relieved and purchased. Black Cover is slightly floating and the feeling of sitting is not good.
Reliability when stopping to loose ground, neither item is no problem.
I think that it is a problem of the BMW side.
View detail
Fits: TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER
Material is good but can not be installed.
I bought it for TIGER 1050, but I can not stop Screw as it is because the tip of STAND does not fit. There was no notice that it could not be installed unless it was cut. View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200V
Great product.
Usually, the poster is misunderstood. The slightly awkward estuary up that spreads the side stand of the flatulence is inconvenient and misunderstood. There is no flatulence in my heart. Even that is just one kind of thing that happened with chrome. It's the same as selling eBay and Amazon late in Japan. If you look for a Japanese site, you can search for two types with KIJIMA. You can search for one type with IKKOKU. After careful consideration, I decided to make an IKKOKU product made of aluminum CNC, ordered a black-painted product, and waited until I arrived at my house for the first time in 5 days. When I opened the packaging and looked at the product, it was really precise and well made. Of course, the price is also higher than the Jojima product. When you extend the estuary stand, it really feels easy to spread and fold. It certainly has the effect of just spending money, and it's worth the investment. The misunderstanding of wearing this side stand extension is probably the first in Korea. Many Korean poster misunderstandings I have never seen a flatulence photo. I usually post a misunderstanding fart of side stands spreading a little awkward estuarine inconvenience Opportunities to misunderstand fart Jeken have been repeated many times I had to wear the stand extension and eat my heart Even if I lag behind a domestic motorbike shop, I do not have Dununge in my heart. Even so, there is only one kind that happened in chrome. Look at delays on eBay and Amazon. It is the same as selling it in Japan. Looking for a Japanese site and looking at KIJIMA two kinds, IKKOKU searches After careful consideration I decided to make IKKOKU products made with aluminum CNC, ordered with black painted products and waited I arrived home for the first time in five days. When I opened the package and looked at the product, I made it There is definitely the effect of just payi. When you stretch the attached estuary stand, it spreads out easily and it folds truly comfortably. ng the money, it is worth investing. Perhaps my misunderstanding fart with this side stand extension is not the first in Korea, is not it? I have never seen a lot of Korean sports misunderstanding fart photos. (Translated by Google Translator) View detail
In a nice way price
Previously used P & A International Peitzmeier Company : Side Stand Helper is a structure that sculls the bar into the base, and it broke from the base of Screw.
This is one, so it will not break.
Better than you can see in the picture.
However, expensive.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://global.webike-cdn.net/photo/impression/08/08f3ff1961a04eb3782d4ee36a613192L.jpg)
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Icon, DUCATI Scrambler Icon, DUCATI Scrambler Icon
The angle at parking is standing and it is a nice feeling.
When parking in the side of the road, if the road is a kamaboko type,
The car body as compared to placing it in a horizontal place (Sleeping too much) I will.
When this product is installed, Side Stand becomes about 5 mm longer
A little angle of Motorcycle will occur.
Although it is just a little change, I feel like I can easily raise a single car.
However, I knew it after purchasing, but similar products are on sale in other Manufacturers,
Especially what made by TOURATECH is cool with DUCATI with Logo.
I hope that it will help prevent snagging on lawn such as Camping place.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://global.webike-cdn.net/photo/impression/75/755816f05d115d98791627f2b7b00f57L.jpg)
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The mounting accuracy is bad
GSX 1300 R HAYABUSA has a large slope when stopping at Side Stand, so weigh down when raising
I bought it in the summer to prevent STAND from getting into Asphalt.
Mounting is essentially just fitting and tightening 3 Screws.
However, unfortunately it is not possible to enter either STAND or product.
I deleted STAND with Grinder.
Since the depth is small and the STAND does not run even after cutting it, it is impossible to put on the top covering?.
You can not install it unless you cut the depth of the product or cut the back of the STAND to thin it.
I built my own Spacer in between.
Another Bolt was necessary because the Bolt's Length is insufficient with Spacer's thickness.
It may be different depending on the type of car, but I did not buy it if I knew that it was necessary to process this much.
If you are not confident in machining tools or machining, I think that you should ask Shop for installation.
Nice place
- You do not have to take things to lay under STAND in the summer.
- Since the STAND becomes longer by about 5 mm, it is easier to wake it from the time of stopping.
A bad place
- The mounting accuracy is very bad..
- Price is too high.
Others
- For vehicles that are Lowdown by footbed countermeasure, STAND is about 5 mm but it gets longer.
- If there is an Exhaust System on the side where the Side Stand is located there is a possibility of contact during storage.
- It takes a car weight and contacts the ground so it's a bit sad to be scratched (Lol)
View detail
Install correctly
I made Swingarm 5 cm Long so I made it a little
As the car height got higher, when I set up Side Stand
I thought variously because the car felt too tilted
I wonder if it will be cheaper than exchanging STAND itself
I bought it with feeling.
It was quite ideal as I just wanted to feel it.
became. As the footprint became wider
You can be stopped with confidence in places that are a little rough.
I was worried because fixing was fixed only for Screw
It is surprisingly firmly stopped.
Striking directly when standing out, but rattling
You can also get out.
View detail
![Stand Height Bracket [Kickstand Shoe]](https://global.webike-cdn.net/photo/impression/b6/b6ad0c88d83bdd1c2ff37a4597dc2574L.jpg)
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
To people with short legs - - -
【What made you decide the purchase?】 When stopping at soft soil, STAND was sunk and scared because it was scary.
【How was it actually trying?】 It can be stopped steadily even on soft soil and it also makes it easy to cause riding when on board.
[Is there anything I was disappointed about?] None
【Hope for Manufacturer - Please let me know if there are any improvement points; Please make it a little cooler design.
【Have you compared items?】 D company STANDLARGER
Product of D company bought by looking at the conformity table but purchased it, I returned it with absolutely different dimensions to the extent that I think that installation was confirmed?. I was on the 13-year CBR600RRJapanese specification, I thought that the STAND shape is different in the reverse car, but as I was able to attach the R & G product of this foreign Manufacturer - - - Company D - - -
Apart from that - - - I am a short-standing SS rider. In the case of stoppage, I put my feet on the right for short legs, but I put my feet on Right, but in order to get ass to Right it is difficult for my legs to reach when giving a STAND with Left feet, so it is difficult to get out of STAND. However, when attaching this product, the point of STAND got heavier, so if STAND 's feet arrive even a little bit, STAND will come out spatially! Afterwards if you attach this product you get a little car body so get on When it happens, the cause is easier. When I saw the product of company D, he said, "Large younger than I thought - - - I thought that this product is exactly Large Kimono. Even though it became easier to put in and out of STAND as a by-product, this item is a divine item for me with short legs - - - It is Recommendation for people who are difficult to put in and out of STAND!
View detail
Overall
It installed in TRACER.
Although installation, Screw's precision or Material is one more, and it is retightened with Hexagonal Wrench
Then the Screw's mouth will collapse and the tool will not come out.
Screw lock agent is included but it is included, so there is no need to purchase separately.
It can be installed with Hexagonal Wrench 1 pc.
Other than that it is generally satisfactory, and Coloring is also not noticeable.
After installation, the feeling of grounding improves considerably.
TRACE tends to be heavy on top, but because it is Side Stand with that few ground contacts
I feel more comfortable.
Although it is good as a whole, this evaluation was made on the quality and price of Screw.
View detail
It is too thick!
Maybe it depends on the type of car, but the geta was too expensive for our vehicles.
It is indeed the primary objective of this Items "It is not buried in Left Side" Has been achieved, but if you mount and stand on Asphalt or Concrete, the Motorcycle stays upright as it falls to Right even if the wind blows.
I was disgusted by searching for earth and grass on the road and stopping it..
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200V
You can easily mounting.
BoltQuantity : Just install it on Side Stand with 2pc (Depending on the model of Motorcycle, but ...) is. Part that protrudes (Where you put foot on) Loose the Bolt and it turns round and you can adjust it to the direction you like. View detail
It is unexpectedly hard and thick
I am putting a Motorcycle in a bicycle parking lot on the Concrete floor. Side Stand scratches on the floor and purchased to prepare the underlay before complaints came out.
It is not that I do not like it, but for comparative study, even if we search similar items with Net, it did not quite hit and it was only this. It is a clearance product.
I thought that it was a soft material like just a round Felt, but the back side is a Plastic board of slickle, the surface is textured plywood, there is the smallest limit decoration as well, I think that it is not ashamed also at the bicycle parking lot.
I think that it will disappear if you leave it in the outside bicycle parking lot. I think that it is an indoor limited item.
Size is about 20 cm in diameter.
The price is a bit high, is not it?.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200V
It will be easier to put in and out of STAND
I attached it to Forty Eight of MODEL 2014.
Forty Eight was able to attach.
Design is also Parenthesis good, there is sense of unity as it is Black.
Performance is satisfactory, and it will be easier to put in and out of STAND.
The price is not cheap, but it is a good item to buy.
View detail
Large satisfied with less than half the OEM price.
NeoFACTORY has everything. DAYTONA and Extension of one country are too expensive, KIJIMA's design is bad. At that time I found this exactly the same as OEM's Jiffy STAND.
It's easy to install, it makes STAND easier to put out.
View detail
To prevent scratches on the ground surface, to prevent falls
Orange color is noticeable.
Material imagines soft and soft material
I was doing, but it's quite hard
It was resin..
Side Stand tip attached to the car body
It is wider than the ground plane
Asphalt is softer than gravel
You can use it without sinking even on the ground.
Groove is also cut on the back side, and it is hard to slip
I think that processing has been done.
There is a hole in Body,
I do not understand how to use it.
Perhaps, using that hole
String etc.. Forgotten to prevent using ...
When used to some extent, at what position
Although it is easy to understand whether STAND can be multiplied,
It took a while to get used to it.
Rather than overturning on the road,
If you have one
"I will not die ..." To STANDPAD
It may be!
View detail
Under DAEG's Side Stand (During Touring)
Material is thick and solid.
It can be taken without problems if the weight of DAEG is around.
Small Type - lightweight (Male palm slightly larger Large) Because it is convenient to carry in the outside Pocket of Bag.
Gravel parking lot (Gravel or Small Stone?) I used it but I was not dissatisfied at all.
View detail
Quite
It is quite solid making.
Previously I used a board, but there is a fear of breaking,
I bought this product.
The back is uneven and it is a slip prevention.
Hold STAND firmly.
Since the color is noticeable with red, it seems to be a prevention of forgetting after use.
View detail
STAND
I bought it for unused and parking use,
Until now, I used something that crushed empty cans,
I used a thin wooden plate,
I searched for good things because it seemed quite obvious.
View detail