Reviews
HONDA LEAD125
The fit is perfect and perfect.
However, I am a little disappointed that Hexagonal Wrench is not included.
Those who do not have it need to prepare it separately.
Also, depending on how the bar is installed, it may be difficult to see the Meter device if it is placed in front of the bar, which may cause some inconvenience.
However, Smartphone HolderQuantity:Pair (for Left and Right) I am satisfied that there is quite a bit of room even when fixed at both ends.
I'm glad I bought it!
View detail
No ruggedness.
I haven't run with the side bag yet, so I'm not sure how I will feel about it, but it looks neat because it is a thin Pipe.
I like the fact that the angle can be changed freely, and I think it looks not tacky (in my opinion) without the side bag.
View detail
Satisfactory in appearance and function, but price is a little high
[How is it used?
It attaches to the Stack pipe and guards the Headlight. I do not often drive on forest roads, but I installed it to prevent insect Attack from getting dirty and insect carcasses from getting caught in the gap between the headlight and the Attack. I think it also has a dress-up effect, although it is not to my taste.
Was the one you received as per Image?
The Polycarbonate Guard is also not too bad, but not too bad. For this gold price, I felt the quality was not so good. For this price, I would like to see a better Bracket.
Was the installation difficult?
If installed according to the Instruction Manual, even beginners should be able to install it without problems.
However, it says that no one without a mechanic's license should perform the installation...
I think it is good that it can be installed on the Stack pipe, but it can be moved back and forth a little and installed in the desired position.
The Instruction Manual warns that over-tightening of the Bolt may lead to cracking, "Too tight." It would be nice if the Torque of tightening was listed, but why isn't it? It would be nice if the Torque of tightening was stated, but why isn't it?
How was your experience with it?
It is good to see that insects are hardly getting into the gaps in the Headlight anymore.
I am glad that wiping off the bugs is easier, but of course it is harder to do when cleaning the Headlight itself.
I have never seen anyone else wearing it, so I think it is good for those who are looking for something different and for those who are looking for a dress-up effect.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
Pad looks good and functions well, but the texture was not so good.
I thought it would be more solid at this price.
It could be that they are cheapening the product for lightness, but if that is the case, why not make it cheaper?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Instruction Manual states the following
Do not attempt installation unless you are a qualified mechanic."
"Any inquiries regarding installation should be directed to the mechanic who performed the installation, not to the purchaser."
From Manufacturer's point of view, I think it is listed to avoid responsibility, but how many of the people who buy these are qualified mechanics?
I think that the probability of accidents due to installation defects is almost nil for this product, but not at all, so it may be inevitable to write this, but I don't feel good when I see the Instruction Manual after purchasing the product without stating this in the product description section. I guess. What about knowing about it after you buy it?
The functions and appearance are good, but I can't give a good rating overall because of the texture, price, and the way the Instruction Manual is written, but I can't help but recommend it. I think it is a good buy for those who go touring in Hokkaido or are concerned about insects.
View detail
It is active in our Garage!
Our home-made Garage is 8ft×8ft in external shape.
There is Heat Insulating Material&OSB plywood on the interior plus a doorway, about 230cm deep.
I was going to put the 250TR straight in, but when I put it in, it is not parallel to the wall….
No Space to switch back and forth….
So, a triangular Dead space is created.
I was wandering around the Net looking for a better way and came across this product.
I thought about buying a new one, but when I looked on Mercari, I saw it for sale at a discount price, so I bought it. (It was used, so I don't mind if it had some Wound/Rust.)
How to use,
(1) Put the front wheel in deep enough to hit the back wall.
(2) Stand the car body on the Side Stand.
(3) Insert the Motorcycle Mover into the rear wheel.
(4) Raise the vehicle and push the Motorcycle Mover in with the Right foot.
(5) The body of the car is completed standing on the Side Stand!
It was a little strange to pull the Garage until I got used to it, but this product eliminated the Garage's dead space and made it possible to use the Garage more spaciously.
I'm glad I bought it
(Unfortunately, the Center Stand for ESTRELLA, which we went to the trouble of attaching, is no longer usable due to the lack of a draw allowance in depth …...)
View detail
Fits: YAMAHA Bolt, YAMAHA Bolt, YAMAHA Bolt CSpecifications, YAMAHA SCR950
The difference is noticeable at high speeds.
I didn't have high expectations for the size of this product, and it is only a Universal Product, so I didn't expect much. The cut around the light of the screen has changed a lot. It doesn't make any difference on the street, but it reduces the wind pressure on the chest when driving at high speed. View detail
If you can endure the mental anguish of possibly scratching the body of the car, by all means.
Was the one you received as per Image?
I bought this because it was the only one that had a so-called Basket-like shape.
Was the installation difficult?
First, it is recommended that the part to be fastened with Bolt be widened before installation.
If you try to put it on as it is, it obviously hits the exterior.
I would like to see Quality in this area do a little better.
It can be installed in as little as 10 minutes, as all you have to do is remove the existing Bolt and replace it.
How was your experience with it?
Minimum required luggage rides.
I use a Small Sai Bag with an anti-drop Carabiner.
[Included Parts:were they on?
SmallさいNet was attached with Service, but I personally don't think it is necessary.
[Was there anything that disappointed you?
Since it is not a cheap Custom, I wanted to pursue more Clearance with the width of the car body.
View detail
It looks Refreshing and cool.
Wiring can be managed by looking at the wiring diagram attached.
The Engine Starter Motor has a protrusion on the Case, so when installing it in the Handlebar, either drill a hole in the Handlebar or cut it out.
If you want to fix it properly, you should drill holes.
I drilled a hole.
Also, if the Screw is tightened too strongly, it will not return when the Cell is pressed, so adjustment is necessary.
If the Brake Clamp is also tightened too hard, the Brake lever will not return.
If you loosen this one until it goes back, the Clamp will not be fixed and will move.
It is dangerous that the Brake can not be fixed, so after much consideration, I decided to use the gap between the Handlebar and the Clamp Limit for the Wiring.
Insulation Tube (a thin tube that shrinks when heated) was inserted using Parts Cleaner and screwed closed.
There is only enough space for the paper, so we need to figure out a way to secure it.
In any case, I am generally satisfied with the results, despite some trial and error.
The quality and texture are 3 stars because of the need for the above devices.
The rigidity is 3 stars because it has only been a few days since installation, but the HandPost and other Gold genus components are solid.
View detail
Box set
Very easy to use BoxSatisfied! View detail
Gyro Canopy Worldwork Power Silent Muffler
GYRO CANOPY WORLD WORK POWER SILENT MUFFLER USAGE REVIEWS As far as the main story is concerned, the acceleration force is so good that you can feel it.
It goes all the way up without slowing down, especially on uphills.
There is no big change in the maximum speed, probably because of the high-speed drive system tuning. (around 3km)
Dr. pulley 7.5g, AUTO BOY high speed pulley, Hunter hyper talk cam 4 cycle gyro system, big wheel, set like this,
The maximum speed is up to gps65km.
Above all, I am satisfied that after muffler tuning, it will go out without a hitch.
It's been 4 months since I ordered. Please refer to those who purchase
-------------------------------------------------- -------- Gyro Canopy World Work Power Silent Muffler Using Review Speaking of the book alone, the better the acceleration power is better. Especially on the uphill, it will go up without a decrease in speed. change in the maximum speed, probably because of high -speed drive tuning. (Around 3km) Doctor Pulley 7.5g, AUTO BOY high -speed pulley, HUNTER Hyper tokam 4 -cycle gyro type, Big Wheel, which is set like this. maximum speed is up to GPS 65km. Above all, after muffler tuning, I am satisfied that it will come out more and more without delay. It took 4 months after ordering. Please refer to those who purchase Powered by Google Translator
View detail
Another Option, but I think this is Mast if you buy the Box!
The company's product 32-Litre 2-Colors Lens Rear Box Exclusive (When I purchased the Rear Box (hwb-32), I read the manufacturer's description and thought it would be better to have it, so I bought it at the same time.
The inner cushioning of the inner cushion is moderate, and the exclusive design allows the inner cushion to fit almost perfectly to the complex unevenness of the inside of the inner cushion. As you can see in the image, even though it is fixed with Velcro in several places, there are still gaps. Just fit." It is not so much that it is a problem, but it is not so much that it bothers me.
Anyway, without such an Inner, the contents will be scratched and it will rattle noisily, so I think it is a must. But cheap!
View detail
I would give it about 7 stars.
It was initially installed on a PCX, then switched vehicles and installed on a VINO.
There are many famous manufacturers such as GIVI and SHAD, but the most important point of this product is that the lid can be opened and closed without key lock. This is the information at the time of my purchase, and other manufacturers may have improved their products, but at least at that time, GIVI boxes could not be closed without using a key lock.
This means that a person like me, who carries a motorcycle key and a box key attached to each other, has to stop the car, remove the key from the Cylinder, go to the rear with the key, open the box, take out its contents, close the box with the key, go to the front again with the key, and insert the key into the Cylinder. I have to go backward with the key, open the box, take out the contents, close the box with the key, go forward again with the key, insert the key into the Cylinder, and so on. This is a life-and-death problem for me because I am a lazy person.
On the other hand, this one can be opened and closed with no lock, or locked only when away from the motorcycle for long periods of time or when valuables are stored in it.
The inner cushion is equipped with the manufacturer's exclusive inner cushion, so the contents are not damaged at all. I have replaced the red reflector, which is common in boxes, with a Clear Lens from Standard Equipment.
Anyway, the product is easy to use, sturdy, and inexpensive.
View detail
It is engineered and made like I would expect a genuine Honda part to be
About quality and texture: Matches OEM About the feeling of use: Very Nice Products to buy together: Doesn't look like you can get the rack after the fact, so really decide if you want the kit with the rack or not. I slightly regret not getting it, but the price didn't seem worth the value. Difficulty of installation: Very easy, 19mm wrench, 12mm wrench, 4mm allen, 10 minutes later and you have a removeable passenger pillion. Cost performance and comparison with other products: You get what you pay for, it may be more expensive than throwing a pad on the rack, but it works much better, looks nicer, and functions flawlessly. About shipping and packaging: Fantastic, ordered on feb 9 and received in Tennessee US from Japan Feb 14. Any concerns, cautions, or advice when purchasing: None other than make sure you don'tn want the rack. View detail
crf250rally
The direction of travel of crf250rally is very dark when driving on forest roads at night because the direction of illumination of BedLight is a fixed type.
Fog Lamps from other companies are a bit expensive. Then we came across this product.
As a result, it was installed on crf250rally at my own risk.
The installation was done by a local Motorcycle shop.
However, the supplied bolt that secures the Fog LampBody to the bracket seemed to be too short and needed to be replaced with another bolt.
Other than that, I was able to install it without any problems.
From the above, the quality is quite good.
This Fog Lamp is very bright and has good performance.
I don't know about durability because I'm just getting started.
View detail
Preparedness for falls.
This product can protect the vehicle body and exhaust system in the event of a fall.
Rider is like an insurance policy in case of a fall because of its Small pattern.
Exhaust systems are expensive and I don't want to purchase ・・・・ again.
(It is better if the time when it can be used never comes.)
View detail
Fits: SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650
To prevent Tank from being scratched
I bought this to prevent Tank from getting scratched during Knee grip.
I like it because the Tank is Black color, so it is not so noticeable.
Slip-resistant Material (Rubber type?) The double-sided tape seems to be firmly attached to the tank.
However, I think we will need to see how long the adhesion on the Edge portion will last.
It is not 10mm thick, so it does not feel uncomfortable when Knee gripped.
View detail
Fits: YAMAHA BirdCity 155, YAMAHA BirdCity, YAMAHA Tricity155
WorldWalk Long Screen
I'm 180 tall and the wind protection is excellent. I think it depends on the type of car, but it feels a little Slim. if you have a Mount bar, you can see the USB Wiring in full view. [Color] I think you should choose Smoke.
Screw holes are slightly gapped, so a little fine tuning is required for installation.
View detail
Installed on a KTM, unfortunately the ScreenBody was scratched.
The product was packaged well, but still had some scratches from transportation.
Bracket is also stable if tightened firmly.
However, you must be prepared to get the Clamp's tightening scar on the Handlebar.
View detail
The product itself is good, but the details are not so good.
I thought it was a good product because it can be mounted parallel to the handlebar at any distance, so it does not get in the way, and it allows for a sufficient length of bar to be effectively used.
However, the attached washer is a little small in outer diameter and not thick enough, and I am concerned about its strength when attaching the bar to the plate that also comes with the washer.
On the flip side, I could say that the Slide hole in the bar is too wide.
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Cat Fuel Tank Sticker
My motorcycle is a honda rebel500. I bought this World Walk fuel tank protector on webike. The material of this fuel tank sticker is soft. The shape of the cat is very cute. It fits well with the fuel tank and is glued. It is also very tight, unlike the fuel tank stickers purchased from other websites that degummed quickly. -------------------------------------------------- -------- My motorcycle is HONDA Rebel500. I bought this World Walk fuel tank protection sticker on Webike. This fuel tank sticker is soft, cats are very cute, and the fuel tank is well fit. It is also very tight, unlike the fuel tank post purchased from other websites before it quickly removed. Powered by Google Translator View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA250R
Stylish Slider
Product Name
Engine Guard for NINJA2 Helmet 50R/400
Item Number
weg-8e
Vehicles
NINJA400 (2BL-EX400G)
Number of man-hours
About 2 hours
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, Driver, Hammer, Pliers, etc.
Why did you choose this product?
I chose Slider to protect NINJA400. I also chose Endurance because they are one of the cheapest sliders and a manufacturer with a sense of security. I also thought it looked stylish and not too bulky.
Was the one you received as per Image?
The Black paint was even and solid.
Was the installation difficult?
It was difficult because I had to remove the Cowl. Make sure you remember where the removed Large amount of Screw was attached. Also, the screw holes to insert the Slider were out of alignment, so it felt a bit forced.
How was your experience with it?
When I used it, such as when it was bumped, it protected the Engine and exterior well when I knocked it over to test it out. It also seemed to be very strong. It would be nice if I could spend time without using it, but it has a great Parenthesis look. It could also be used as a footrest.
[Included Parts:were they on?
The instruction manual, Screw, and Washer were all there.
[Was there anything that disappointed you?
Screw lock agent if available.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail