Reviews
Babyface Lever Guard
About quality and texture Strong steel will black smooth surface. About the feeling of use Looks great. Not too huge looking as the other brands. Looks sleek. No cheap material look. Products to buy together Babyface long bar end. Difficulty of installation Easy to install. Maybe I take a while to adjust the level which you feel comfortable and protecting the level from breaking. Cost performance and comparison with other products Cost is reasonable as all the babyface products. Good quality. Unlike expensive Italy brands is almost twice the price but same quantity. About shipping and packaging Small package will do. Can order with other small items. Well pack with plastic package. Any concerns, cautions, or advice when purchasing Drop once my motorcycle before and its able to to protect my level from breaking but these a possibility to use back the level protector again is you are able to bend it back and re-coat the paint paint again. But then again you can alway purchase a new one as the price is reasonable. My level did got scratched during the drop but it sires protects it from breaking. View detail
Babyface Lever Guard
About quality and texture Hard aluminum feel. Looks sturdy and able to restand drop I guess. About the feeling of use Length is adjustable. Able to fit together with my gale speed brake pump and clutch original length Products to buy together Bought together with babyface end bars that fits directly to the original handlebar. Difficulty of installation Easy to installation with less then ten minutes. Cost performance and comparison with other products Price and outlook will not be losing out to other competitors brand. About shipping and packaging Well plastic packaging. No issue when received item Any concerns, cautions, or advice when purchasing Need to find matching end bars for your bike. If it fits no issue installing the guard. There's a bit of gap on the Original handle bar. But I think it's not an issue. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
Installed to make it look Race ish!
Installed on CBR600RR this time.
I installed the Lever Guard because I thought it would make the car look more race-ready!
Originally, it was designed to prevent the brake lever from falling over during a race when it made contact with another car.
We do not know if it will protect Lever in the event of a fall.
If I wanted to install this, I would need to replace the Handlebar End with one made by BabyFace.
The Bar End and Lever Guard by BabyFace were installed to make it a much more race ish!
I am satisfied with both the appearance and quality.
I don't know if it will be Demerit, but the Gold amount seems a little high.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
Race ish
Removal of OEMWeight may be … impossible for Beginner….
Installation is easy.
Stylish! Race ish!
Hoping it won't be useful.
Logo is vertical, so Quantity:Pair (for Left and Right) Possible.
View detail
lack of explanation
[How is it used?
Circuit Running
Was the one you received as per Image?
As per Image to some extent.
Was the installation difficult?
Easy
How was your experience with it?
not bad
[Included Parts:were they on?
Bar End would have been nice.
[Was there anything that disappointed you?
That there was only one side.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Simple is Best
[How is it used?
Touring
Was the one you received as per Image?
Lightweight and sturdy
Was the installation difficult?
No problem for beginners!
How was your experience with it?
Unknown, as there is no fall (No problem with driving)
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The strength of the part that adjusts the angle is weak!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Installation Point
Finally, the Handlebar is set toQuantity:Pair (for Left and Right) Need to make sure that it does not contact Tank or Cowl by cutting it into
By the way, I thought the hole at the tip was to attach something with a Screw, but a Babyface employee said on Twitter that it was to reduce air resistance.
View detail
Satisfying to look at.
Although I don't use it for DogFire to battle in the races, it looks like a race ish and I am very satisfied with the installation. I asked the shop to install it at the same time as the BABYFACE Handlebar End (Long Type, Stainless Steel Cut-out). The texture is also very nice. View detail
Parenthesis OK
I installed it on my YZF-R46. Installation was easy and took about 5 minutes. I am satisfied with the quality. It looks like a race ish. View detail
Lever GuardMirror
I've wanted to try this product since I saw it.
In fact, I was skeptical until I saw the actual product, but when I saw the thing, I was convinced I could do it.
So I made Lever GuardMirror by combining Bar end mirror which I had at hand.
The good thing is that the width is narrower than with the Bar end mirror and the mirror is no longer in the way.
As usual, the vibration makes it invisible, but I think it looks and feels better than the Bar end mirror did.
The production Image is the Bar end mirror of RC213VRS.
So far, it hasn't come loose due to vibration, etc.
View detail
Something like this.
Quantity:Pair (for Left and Right) The shape of the Clutch lever and the Brake lever is different, so the quantity:Pair (for Left and Right) It's a shame the mounting angle changed a bit, I installed it for insurance in case I rolled my motorcycle, so I guess it's like this! View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
I wanted this Lever Guard.
The height of the brake lever and the clutch lever are different, so I wanted to have an adjustable brake lever that doesn't look like there are steps at a glance.
important item
[Was there anything that disappointed you? The Bar End option is only available to the same Manufacturer.
Do you have any wishes or improvements you would like to make for the Manufacturer? Development of Bar End that can be used for OEM Bar End
[Do you have any products to compare it to? No
Frequently Asked Items
What made you decide to buy? Angle adjustment mechanism
How was your experience with it? Satisfied
Was the installation difficult? No
【Please tell me the installation point and hang】 You need to have the guts to remove the screw lock on the OEMBar End
[Was the Instruction Manual easy to understand? Yes
[Included Parts:were they on? Yes
View detail
Good stuff
Initially, I bought it just for Parenthesis to make MotoGPImage (Bitter smile) I was able to understand that this is a large functional part that prevents the malfunction of Brake (Sweat) 。
I'm going to put it on any motorcycle from now on
View detail
SS looks good with it on
Handlebar Weight and Quantity:Set introduced
I don't go to the Circuit often, but I feel comfortable riding around town
(The rest looks.... .w)
View detail
On public roads - - -
Babyface's Lever Guard!
I do not need this on public road (Lol)
I think that it matches well with RSV 4 with a focus on Visual!
Bar End has 3 Set of Baby Face so I am attaching STM in Italian this time.
Later, you might guard the expensive bremboLever?
It is a very similar price.
Lever Guard's Bolt class is 64 Material : Changed to Titanium.
View detail
The appearance when attached is different.
For installation, when combining with the Bar End being used, in-kind matching is necessary.
I combined with Active Universal Bar End, so M6 Length 90 mm Bolt was necessary.
Because it is an uncharacteristic Size, I had a hard time finding it.
Naturally, in order to attach to Brake, Clutch, Quantity : 2pc. I have to buy Set.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000 SP2, HONDA VTR250, HONDA VTR1000 SP1, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR954RR, HONDA CBR929RR, HONDA CB650R
BABYFACE Lever Guard
This is a good looking anodized alloy lever guard ! Very simple to install, it adds a simple safety measure to any road or track bike. Assembly only requires three Allen keys (5,4,3mm) and a dab of thread locking agent to secure the position of the guard. The adjustability of the guard allows for many variations of handlebar/lever setup. Overall, a great product ! View detail