Reviews
It's not Oil Spray.
The product description says that it sprays oil, but I received a dry filter with no oil at all. I did not notice it until just before I changed to this filter, and by the time I realized it, I had ripped the previous filter when I removed it and could not put it back, so I put this filter on as is.
I should have checked more carefully myself, but I'm not sure if I would receive a dry type that is different from the product description. It says "sprayed". Had I realized that earlier, I would have returned it. (T_T)
View detail
Although the sheet of SDR was a complicated form, it was able to be stretched finely. The crease is made strongly in part and when disappears well probably for packing? A product of this sort becomes uneasy. I always think don't carry out not bein
Although the sheet of SDR was a complicated form, it was able to be stretched finely.
The crease is made strongly in part and when disappears well probably for packing? A product of this sort becomes uneasy.
I always think don't carry out not being needed side it will not understand anymore if it stretches firmly, but it stretches.
View detail
Fits: HONDA TACT, HONDA DIO, HONDA LIVE DIO, HONDA SMART DIO, HONDA ZOOMER
You can use it.
Installed on SPACY100.
I replaced the one that was on before because it was getting hard to see due to vibration.
The bracket is a bit long, but it is very easy to see and comes with a Rubber Cover to cover the Screws.
Two pieces Quantity:I am satisfied with this price for the set.
View detail
Used in xlr250
The Lever was broken so I replaced it.
It is a little shorter than OEM.
Quantity:Pair (for Left and Right) It is good that it is
View detail
The advantage is that you can freely cut and create Air Filters.
I used it for MONKEY's Air Filter, and since I used it cut, I think I can make about 6 Air Filters for MONKEY.
I used to buy urethane foam sponge from Home center and use it as an air filter, but if you are worried about it, it is better to buy sponge for air filters like this product.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZR-7/S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R
Excellent in costa
Used for ESTRELLA as for Repair
Unlike OEM, there is a little wobble, but it is cheap and easy to supplement.
The appearance is almost the same as OEM, and I am satisfied with the excellent cost performance for Repair.
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Repeat
Quantity in the previous vehicle:2pc, this is the first pc in a newly purchased vehicle.
The last two replacements were used for 10,000 km and 13,000 km respectively, and they did not malfunction or break, making them a safe repeat purchase.
As the product description says, it is compatible with High Speed Pulley. Is it a little Long?
I am using it on my PCX125 engine in combination with a DAYTONAHigh Speed Pulley and a KITACO Power Drive Kit Type X. I have not had any problems.
As the product description says, it is compatible with High Speed Pulley.
View detail
Strengthen Belt
CYGNUS x2 type
Used for commuter rapid transit
KN Project High PulleyType 2 Boss Washer0.8mm AdvancedPRO Boss kosoClutch&Outer kosoCHAMPTorque Camshaft KN Project Two-Split Pin ALBA Reinforced Belt Assembly
I didn't run that much and it stretched out like a LongBelt. There are no cracks at all. The inner side is less reinforced than the outer side.
View detail
Fits: SUZUKI LETS II (2Cycle)
I think it's good as a for repair, about a light tune.
LETS II (CA1PA) I thought it was good for NORMAL and light tune.
By the way, my LETS II is Burial's StealthExhaust System DAYTONA's PowerAdviseHigh Speed Pulley Red Box. Surprisingly? I'm not sure if it's a good match with these, but it's contributing to a good amount of speed.
As for durability, I can't say for sure since I haven't driven more than 1,000 km with it yet. I think it will be durable if I break it in a little.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA TY250 S, YAMAHA TY250 S, YAMAHA TY250 R, YAMAHA TW200 E, YAMAHA TW200
As Spare.
OEM compatible product.
I got carried away and broke my lever while running Dirt, so I replaced it. Just replace the existing lever.
The accuracy is a bit poor.
It works fine, but I feel like the screw holes are gapping…
good point
We can get it faster than OEM.
The installation itself is easy.
The quality of aluminum is not bad.
Brake operation is the same as OEM.
A bad point
The screw holes are slightly gapped.
I'm a little short of taking BALI.
If you look at the accuracy and other details, there is no Drill, but it is totally perfect for everyday use and is Large sturdy.
It is often difficult to get OEM parts for TWs and other models because they are out of print.
Recommendation, as it is relatively easy to obtain.
View detail
Fits: HONDA LIVE DIO, HONDA DIO (2Cycle), HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA Giorno, HONDA GYROX, HONDA GYROX, HONDA GYROX, HONDA GYROX, HONDA GYROUP, HONDA TACT, HONDA TACT
new blet drive smooth ride
my old giorno (2T) has poor drive feed so i open the L case i found the belt has old and loose tension so this is best chance to change NEW BELT after change? good After replacing the belt, the drivetrain noise is reduced, the vibration is reduced, and it runs well anyway. I checked the size and bought it. View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Reinforcement Type?Does it really make a difference? → Results
[How is it used?
In use.
PCX125 (JF28) I replaced the drivetrain on the suspension of the The DriveV Belt that I had originally put on felt like it was slipping somewhat. It had about 5000km on it since I last checked it. When I opened it up, the old one already had a crack in the valley and was already at the end of its life. Was it a little too late?
Was the one you received as per Image?
I liked Parenthesis better than Image because it was kind of, well, fibrous.
I was under the impression that I received a very good product for the price.
The side angles are totally different when compared to the OEM Drive belt.
The angle is much closer to vertical on this product. This product is much closer to vertical angle. I think so.
Was the installation difficult?
I thought it needed a little more Power to install than the OEM one.
I'm not sure if it's because it's new or not, but I'd suggest doing some preliminary research on youtube on how to do things with Tie Wraps before you go to work on it.
The first time I opened the Crankcase, I had a hard time getting it off. If you are going to do this, please use a T-type Box Wrench before you start. (I think it was 8mm) and Rubber hammer are recommended to be prepared.
How was your experience with it?
It has been driven about 100 km.
To be honest, I thought it wouldn't change that much even though it was a reinforced V-Type. Immediately after the replacement, it feels like there is no change.
But after about 10k miles it started to feel right, and it was clearly quicker and more fun at lower speeds. Maybe it's because it's new, but well, that's it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None! Satisfied!
View detail
No problem!
I had to replace it because it was getting hardened.
I think it's a great product at a great price.
View detail
Fits: Others
ALBA Off Car Mirror
Mirror blur while driving is so bad that you can't see HADRILL.
It's acceptable, if you think about it in terms of Cost.
View detail
Fits: YAMAHA VINO [Vino]., YAMAHA VINO [Vino].
Back Mirror for ALBA VINO
VINO is active in the anime? Because it was
"Oh? A round Back Mirror would be nice too."
And
The price isn't that high either.
result
It looks good.
It looks good on the round APRIO
I think
View detail
Fits: SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4
High Speed Pulley compatible
I replaced it at the same time when I installed the High Speed Pulley Kit.
After 12 years and over 8,000 miles of use, the OEMs still seemed to work, but I chose to go with the reinforced version because I drive over 60 miles every day to work.
There is no visible effect when installed, but the price is cheap and good.
I will have to run it to see how durable it is, but I'm hoping for the best.
View detail
It's cheaper than OEM
It is cheaper than OEM and recommended by Shop, so you can be sure. It is cheaper than OEM and recommended by the shop. View detail
Fits: HONDA SUPER CUB 90, HONDA XL250, HONDA Variety, HONDA Dream 50, HONDA dachshund, HONDA Spacey 50, HONDA Spacey 80, HONDA Journo Clare, HONDA XL250, HONDA charette, HONDA Super Cub 50, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
No problem
This is my first time using a non-OEM Gasket and it works fine. View detail
Fits: YAMAHA JOG, HONDA LIVE DIO, HONDA SUPER DIO, YAMAHA JOG90, YAMAHA GRAND AXIS, YAMAHA AXIS 90
Worth a try when combining external products?
The BaseEngine is bored up and registered as a moped 2 class. When installing an OEM modified exhaust system or an external exhaust system, a liquid gasket was used to fill the misalignment, but it is not practical and durable. If you apply a small amount of liquid Gasket to this Gasket and match it, it will function well until the next maintenance. However, because it is not possible to overconfidence, it is better to think that it is a supplementary thing at the time of I Regular. Cospa is decided by individual subjectivity, so I cannot say. I am Repeater because there is no other choice. View detail
Consumables.
It has about 20,000 miles on it since the last replacement.
It's not a physical part, but I'm comfortable with this reliable manufacturer.
It's dirtier than I thought it would be and I'm going to replace it every 20,000 miles.
View detail