Reviews
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA650R, KAWASAKI VERSYS 650
For NINJA400R
Installed on NINJA400R.
Since it is an important safety part, we asked Motorcycle shop to install it.
The feel of operation, texture, etc. was perfect without any complaints.
If you are not confident about installing it yourself, ask a professional contractor to do so.
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA YZF-R6
The texture is lovely.
Used in 2008 YZr-R1.
Simultaneous replacement of Grip and Bar End.
If you install it as it is, there is a large gap between the end of the grip and the end of the bar, which is not a good parenthesis. Well, there are many motor cycles like that.
It is not enough to just attach a pontoon.
This kind of thing can be done neatly by modifying and adjusting it to suit the motorcycle.
The spacer was kindly included in the kit, so we shaved off about 4mm of the gap and adjusted it to 1mm on the Throttle side.
This is a consideration that the manufacturer has gone to the trouble of creating a high quality product, so it should have a good parenthesis.
View detail
It looks great!
I think this is a product that is hard to appreciate until you fall on it, but it looks Parenthesis good! I have been hearing a lot about Speedra recently, and I would like to continue to use Speedra in my Front Fender and Lever relationships! View detail
I think it's a little too Large.
The Cowl is easy to install because there is no modification, it is cheap to work with, and it is very helpful for the Large size change. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
CarbonLong rear fender
No problems with installation, no distortion.
It is a Long Type, so it can play the role of a Fender.
Large Satisfied!
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI Z1000R, KAWASAKI Z1000, KAWASAKI NINJA1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Great Value
Great quality for th price, plenty of adjustment to required length. Custom colour mix match perfectly with the custom paint. Easy installation, works well with Huricane bars. Rides well. Fast shipping as always. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX250R, SUZUKI DL1000 V-STROM650, Others , DUCATI 1098, DUCATI 1198, DUCATI 748, DUCATI 749, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 999, DUCATI DIAVEL, DUCATI GT1000, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER S2R, DUCATI MONSTER S4R
good buy
The size fits perfectly and it's a good product. View detail
One point
There are no special functions!
I think it's possible to have one point of coloring!
View detail
Very platePad
Heel plate is a place that is easily scratched by shoes, etc., so we recommend that you attach a pad to the heel plate.
Speedra's pad is Carbon Style with good texture.
Installation is as simple as attaching it.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
Master cylinder cap
Changed from Green Light to Gold. View detail
It looks cool!
I changed from the OEM Exhaust Cover and am happy with the improved look.
No modification is required, and the Bolt can be used for OEM applications.
Recommended if you are buying for looks and not expecting weight savings.
However, I think the price is a little high for this ….
View detail
Fits: KTM RC390, KTM RC250, KTM 390DUKE, KTM RC200, KTM RC125, KTM 125DUKE, KTM 200DUKE, KTM 250DUKE
Clutch lever broken and replaced
The clutch lever was broken by a standing accident, so I thought it would be a good opportunity to replace it with a foldable one.
Brake, Clutch lever and Quantity:I think it is affordable for the Set. I am satisfied with the look and the production.
However, for some reason, the clutch lever moves vertically. It is not at a Level that interferes with operation, but it bothered me, so I installed KITACO's Spacer SIMM, which solved the problem. That is the only complaint I have.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
SPEEDRAMaterial:Twill Weave Carbon glossy Drive chain guard
The installation was not particularly difficult and was done by replacing the OEM.:Twill Weave Carbon shiny and looks up, the shape is more rounded than OEMGuard. View detail
Fits: KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE
SPEEDRACarbon rear fender
I have installed the SPEEDRACarbon rear fender on my 25R and Z900RS and there was no distortion and the mounting holes did not have much gap, so I bought it for my H2SX. As for the installation, I had to install the OEM color in the upper mounting hole and fix it with the OEMBolt, but the hole was small and there was a gap from the center, so I had to use a semicircular bar to adjust the large hole position. But it was successfully installed. The other holes did not need to be enlarged and there was little distortion.:Pair (for Left and Right) The adjustment of the position of the material was done without any special attention.:Twill Weave Carbon glossy and cosmetic and looks better. The mud repellent effect may not be so promising…. View detail
Fits: YAMAHA YZF-R6, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA FJR1300
First replacement from NORMAL!
I bought it in Black
It is a very good product with good texture and Standard.
The Bolt on the Axel side was too long,
I purchased a Bolt about 10mm shorter and installed it.
Clutch Side is installed without Spacer.
View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI Z750S, KAWASAKI ZRX400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI Z750, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6n, KAWASAKI ER-6f, SUZUKI GSX250FX , KAWASAKI VERSYS, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI NINJA650R
Parenthesis is better now.
Installation was easy. The Adjuster is gold because gold is everywhere on Motorcycle. I think it matches the Motorcycle very well. I think the operation is better than OEM. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Can be installed on the 2023 CB1300SF
The system is designed to attach all of the multiple carbon parts at once, and the peel-off paper (Transparent) The parts will stick to each other as soon as you peel off the "P". It is not recommended to work outdoors when the wind is blowing.
In the end, I gently peeled off each part and attached it while positioning it. The level of the sticking feeling is so-so.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Processing is assumed to be Large.
The Instruction Manual states that some modifications may be required, but basically, Dry Carbon, an Other Brand Product, can be installed without modifications in most cases. As usual, this product also requires modification. The remaining 20% will be modified during the installation process.:Pair (for Left and Right) The gap between the two is different, so if you are concerned about the gap, you should refrain from using this product. I had high expectations for this brand because it has been gaining momentum recently, but I have a problem with the outside of Dry Carbon products, including some AEC products. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Installation with processing
Since this product is installed with modification, it cannot be mounted with a simple bolt. However, even with modification, the bolt holes are not perfectly aligned, so those who are concerned about clearance should not use the bolt holes. There are two places where the OEM speed nut is transplanted and fixed, but the holes obviously do not fit and the bolt does not pass through, so I would like you to inspect and make it right. (Lol) I know it's not what Large did, but it's a shame because it's a Brand I had high hopes for. View detail
Fits: HONDA CB400F, HONDA 400X, HONDA CBR400R, HONDA CB250R, HONDA CB250F, HONDA CBR250R, HONDA GROM, HONDA MSX125, HONDA CBR500R, HONDA CB500X, HONDA CB300R, HONDA Monkey125, HONDA NS-1, HONDA CBR500R, HONDA CB500X, HONDA CB300R, HONDA Monkey125, HONDA NS-1
Speed La Lever set
Easy to use. Looks good. I like it. View detail