Reviews
kawasakiCB400TCoverEmblem
I like the Silhouette from the front with the Horn hidden by the Large letter Emblem in Silver. 。 The Alpha bed is also fitted perfectly. Please see the pictures for the rest. View detail
YOSHIMURA Aluminum logo plate
I put it on the LCD Display, which you can see every time you ride.
It is self-fulfilling Parts, but the quality is quite good and I feel a little better every time I see it.
View detail
DOREMI COLLECTION 900
About quality and texture aluminum alloy About the use experience retro look Products purchased together Electromagnetic side cover Installation difficulty Installation location according to your liking Cost-effectiveness and comparison with other products High cost performance and good material About shipping and packaging tight packaging Any concerns, cautions or advice when purchasing no suggestion View detail
Doremi side cover emblem
the studs on the emblem have a thin part and a thick part. the thick part is actually where the clip grabs the stud. the thick part on the front isnt long enough to allow the clip to grab it. View detail
OK
It's nice to be able to drive with the phone attached and not be hit by the wind, so it's easy on the body. View detail
Fits: KAWASAKI , KAWASAKI Z1 (900SUPER4), KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, KAWASAKI Z2 (750RS)
Really good product - great quality.
The quality is excellent and looks exactly like the 'old' Z Kawasaki's from the 1970's. Have had fitted for a while now, and look as good as when I put them on. Flexible enough metal to bend into the curve of your tank, and stick well. View detail
For Racing concept Small but not for mini!
[How is it used?
Striker's Racing conceptFull Exhaust System is used on a YZF-R25 that is being racerized.
Although the Silencer is located in a position that is less likely to be damaged than a normal Exhaust System due to repeated falls.
The glass wool was worn out and was a mess, so I bought a new one while replacing the glass wool.
Was the one you received as per Image?
The design and texture were just like the Image without any complaints, but... the Size "Small" It's big on Habit of Habit!
Apparently, the Racing concept of the R25 is For Power mini of Emblem seems to have been correct.
It's my fault for not checking properly.
By the way, the one for Power mini is "part number : 0SREB5". Check Emblem's Design carefully before buying.
Was the installation difficult?
I have not installed it because it is too big, and I don't want to put a strange load on the silencer band.
If you can do a normal Silencer Overhaul, this is an easy task.
Just skip Rivet's head in Drill and Riveter with liquid Gasket on the new Rivet.
How was your experience with it?
Too big for Silencer up to 250cc! But it's too good to waste, so I'll put it on Silencer's Reverse side and make it DoubleEmblem....
[Included Parts:were they on?
RivetQuantity in a courteous manner:It comes with 2pcs! but the Material:It was an Aluminum umbrella and the shaft was rusty with an iron Rivet.
[Was there anything that disappointed you?
Emblem from Racing conceptSeriesStandard Equipment. I would be mistaken if I were told that this is the case.
Since we know which Silencer is being used for which buzz, please make sure that the Manufacturer has a good setup.
View detail
Emblem
It's very nice.
The front mask stands out.
View detail
fashion-conscious
Appearance oriented, self-satisfied, cosmetic? View detail
Top case Refresh to
I bought a used OEM Y'sGEAR top case to refresh it because it has a Large overall look of wear and tear.
Silicon resin protectant was applied to the body and ultra-fine Compound to the reflector, but we were concerned about the dullness of the Emblem.
All that is required is to peel off the old Emblem, remove the adhesive with Label Peel & Spray, and reattach it.
The overall feeling of tiredness has been alleviated.
View detail
PetitCustom
Quality is high, like Maker Option. It would have been better if there was an instruction manual. View detail
Front Emblem Kit from Kitaco
* About quality and texture, Chrome finished Honda emblem with stainless steel mounting bracket and steel horn relocation bracket finished in a black powder coating with a small wiring harness to position the horn below the lower triple tree. * About the feeling of use, Repositioning the plain looking horn out of sight and replacing it with this beautiful looking Honda emblem sure does improve the look of the Monkey 125 in this area. * Products to buy together, A front fender down bracket kit adds to the appeal of the front emblem kit when installed. * Difficulty of installation, Installation involves attaching 2 new brackets to the lower triple tree with the included hardware and connecting up the extension harness for the horn. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, Cheaper emblem available from MiniMoto but not a complete kit like this one from Kitaco which has all you need for the full installation without having to source additional parts elsewhere, so I say the best emblem kit available for the Monkey 125. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, Strickly plug and play with the non ABS model Monkey 125. Use the product reviews to assist in making a decision on your purchase. View detail
BRC BRC Front emblem
Good for dress-up.
I want not only Black but also Red, Blue, and Yellow colors.
View detail
Installation.
It was a little difficult to install. I like the quality of the product! View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
It was easy to attach.
It was attached immediately as it is a car model Exclusive Bracket, of course. View detail
The atmosphere has changed.
My impression changed.
The effect of just looking better has been outstanding.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX
Although it was felt comparatively high-priced a little, they were the components which it is and regards as good.
Although it was felt comparatively high-priced a little, they were the components which it is and regards as good. View detail
sp takegawa
ape100 I used a lot of Takegawa products while doing this tuner, so I bought a lot of products that fit takegawa sp rather than honda bore up 115cc ,takegawa pe24 ,bore up kit , takegawa clutch , etc ... I bought it while installing --- ------------------------------------------------------------ ----- APE100 I used a lot of Takegawa products while doing this tuner, so I bought a lot of products that SP Takegawa is more suitable than Honda. Bore Up 115cc, Takegawa PE24, BORE UP KIT, Takegawa Clutch, ETC... Powered by Google Translator View detail
Blends in with nature like an OEM
I purchased this product to deal with a gap due to relocating Horn.
Installation is easy, but it is in the tedious category. It's a hard place to get to with tools.
It is a task that anyone can do if they are diligent.
The appearance effect is large, the texture is high, and the matching is so good that you would think it was OEM.
I like it a lot.
View detail
Very useful
I'm worrying about how to install my front number plate, until found this product from here, it is very useful for me, I like it. View detail