Reviews
To Upgrade Protector
Since the standard Protector was not enough for my needs, I upgraded only the back.
Compared to the standard, Protector lifts, but it does not bother me as much.
The thickness is about 6mm, which seems to be almost the same as the standard Protector, but the standard is Mesh, so naturally, this product is stronger.
I am also considering a Chest Protector, but I think it would be too tight to wear with this one, so I am putting it on hold.
View detail
Purchased for use in spring and fall when it is chilly
I purchased this for use in the spring and fall when it is chilly.
I usually use Power age's Air through Rider mesh jacket, but I thought it would be cold in early spring and late fall, so I bought this windproof Spec. inner jacket.
I think the price could be a little lower, but this Material seems to provide good wind protection.
I think it will be tough in winter. Wind seems to come in through the cuffs and neck, so it will be necessary to drive with a winter Jacket in the winter.
When not in use, it can be packed with the included Elastic band, making it very compact and easy to carry on a touring trip.
View detail
I chose one size above and it is just right.
[How is it used?
Purchased for use in spring (March-April) in combination with Inner Jacket of the same manufacturer.
Was the one you received as per Image?
On Image Street, it will blend in naturally with the crowd without standing out in the city.
How was your experience with it?
On 2024/3/30, it was about 20 degrees Celsius and sunny, so I rode my Motorcycle wearing only this Jacket (without inner).
At this temperature, I was comfortable enough with only this Jacket (although it was a little cold when I entered the Tunnel).
Perhaps an Inner Jacket would be needed if it gets to 15-6°C.
Standard Equipment's Protector is thin, so we are considering whether to purchase a separate Protector for safety reasons.
However, there is a possibility that the Protector may float, and I am worried that it may destroy the good points of this product.
Also, my first impression when I wore it was that it was made Tight.
I usually wear an XL in clothes, but this time I ordered one Large size, XXL, and it was just right.
The sleeves seem to be designed particularly Small.
Underwear + YShirt + Inner Jacket + this product felt the Size was Limit.
It is required to wear an inner jacket, but it can be used from spring to fall (late March to early November).
Without Inner Jacket, I'd say April to September.
[Was there anything that disappointed you?
As I mentioned above, the Size is a little Tight. if I had wanted, I would have wanted a little more roominess.
Since many Motorcycle riders are very large in size, it would be better to have a larger size, such as XXXL or XXXL.
Also, Protector is a bit thin, and I would have liked it to be a bit firmer, although this could be combined with Design.
View detail
for spring and fall
[How is it used?
Commuting, Touring
Was the one you received as per Image?
Better than I imagined
How was your experience with it?
Fit to the body
[Points to note]
Might be tough in midsummer.
View detail
Record high.
I have tried several winter gloves and these are the best and not the coldest.
I also like the fact that the protection is firmly in place on the palm and instep sides of the hand.
View detail
It is a well thought out product for Rider.
Height 170cm, Weight 65kg, Inseam 79cm. I usually wear Denim size 29-30 inch, but I bought 32-inches considering Protector and Inner thickness. I wore them without Inner and with Protector and they were a comfortable fit with a little room overall. The design is Orthodox, the quality is good, and I think it is a good product. I wanted to get other colors as well. View detail
Satisfied
The design is calm and relaxed, without the logo assertiveness that is common in riding jackets, so I think it can be worn by people of all ages.
I am 176cm tall, 59kg, skinny, and the L size is just right for me.
I could also wear Uniqlo Down inside.
The Protector supplied is being replaced with the following.
Shoulder→Komine SK-812
Elbow→Komine SK-810
Back→RSThailand Chi TRV044 Size40
Chest→Komine SK-839 (with Daiso Surface Fastener attached)
Hood is mostly decorative.
It can be fastened with a Button, so there is no flapping while driving.
There are two Fasteners on the front, which makes it a bit cumbersome to put on.
Also, since there is nothing covering the Fastener, care must be taken not to scratch the Tank.
View detail
Simple is the best.
I was looking for a good Inner to make my Season running with a leather jacket as long as possible, and I found this one.
When the fastener is closed up to the neck of the stand collar, it is almost impermeable to the outside air, so I was able to spend a comfortable time without losing body heat during long touring sessions. It is thin and moderately stretchy, so even when layered, there is almost no effect on movement. It is very compact when folded, so I always have it on my motorcycle regardless of the season to be prepared for unexpected temperature changes.
Similar products are available from other manufacturers, but I prefer SimpleStyle with PlainBlack & without Logo, which was the deciding factor in my purchase.
View detail
It looks like an ordinary shirt but has excellent wind ventilation!
I have a full mesh jacket but would like to ride in something more comfortable.
However, once I put on Protector, I am not sure about Rash guard, a sunscreen.
We chose KONO products as something cooler and more like everyday wear.
According to Manufacturer Ventilation Level 80%. but it is the same etc. as the mesh jacket.
Since the material is cotton + linen, it can be worn over a T-shirt without hesitation.
The attached photo was taken with a south-facing window so that the Protector on the back can be seen. The Protector does not look bad like a certain manufacturer's product. (The lightest color dungarees)
View detail
Reliable Jacket for rainy days
I bought it after seeing it used by a certain MotoBlogger for rainy day touring.
The design was Casual, easy to use, and excellent in terms of functionality.
It has been about a year since I started using it, and I have not experienced any flooding in the inner lining, even during large rainstorms.
However, the pockets on both SIDES and the pockets on both chests are fine in Small rain, but in Large rain, it is better to be careful because they will indeed be soaked.
The water-repellent and waterproof functions are functioning properly at the moment, but as mentioned in the handling instructions, the functions will gradually deteriorate after a certain amount of use, so it will be necessary to maintain the product with water-repellent sprays.
It is not only useful for rainy days, but also for spring and fall touring, so it is worth having one.
(As expected, it is hot in the summer, and in the winter, depending on the inner layer, JacketSingle Body cannot be expected to retain that much heat.)
View detail
I like the design.
I purchased a Mesh Jacket for the upcoming summer season.
I haven't used it yet, but I am satisfied with the design.
The chest protector also looks easy to use as it is a type that can be placed in the Jacket's Pocket.
View detail
easy to operate
These Gloves can withstand the cold of midwinter commuting.
Since it is for winter, it is a little stiff, but it is easy to operate.
View detail
The design and feel are both excellent.
All Power age products are designed with the rider in mind, and the fit and grip of these gloves are excellent.
The Summer Gloves are breathable, but also have good protection and are safe to use.
View detail
Easy Ride Parka for summer
Height 170cm, standard build, wearing L Size.
It is a summer, breathable, casual parka that at first glance does not look like it is for motorcycles. 。 The Protector function includes a standard soft Protector in the back, shoulders and elbows. You may additionally upgrade the chest and other parts of the body.
It is not a motorcycle-like jacket like a mesh jacket, but a parka with both design and functionality that can be worn on a daily basis.
View detail
This Jacket is worth the price!
I bought this jacket a year and a half ago and used it for two seasons in winter. It is a sturdy and well-designed Jacket, and although it is quite expensive, I am satisfied with it.
The fuzzy inside can be removed, so it can be used in spring, fall, and winter with just one piece.
The Protector has been upgraded so it looks more like a MotorcycleJacket, but if you don't upgrade it, it won't be that noticeable. I don't think it would be that noticeable if I didn't upgrade it.
In the middle of winter, I wore two pieces under this Jacket to cope.
View detail
Thin. Comfortable. Dependable.
Includes use of this product on shoulders, elbows, back, and knees, and therefore includes use of other than this product (shoulders).
Was the one you received as per Image?
It is a product that is usually found in Motorcycle supply stores and is the Image, or rather, the actual product.
Rarely there is such a thing as a tester that can drop an iron ball alongside the Material's PORON and general ProtectorMaterial.
[How did you feel about the Fit?
It is not so thick as Jacket Insertion Type, and the material is like Sponge with a little hard filling, and it is good because it bends well along the Jacket and shoulder due to GunGun bending as shown in the attached image.
How was your experience with it?
Duration of use:anywhere from January to April 29, 2017 to now. since the YZF-R25.
Distance used:probably about 70,000 km.
Jacket:Rough AndRoad (Rough Parka etc.), KUSHITANI (Expand Amenite Jacket, Winter Amenite Jacket)
Bag used:One Shoulder type
Started using it as a replacement for RoughAndRoad's hard plastic system.
The "Jacket Insertion Type" is not as strong as the "Jacket Insertion Type".
If it was inserted in the Denim pants, the Protector is so good at hiding it that the instructor has to touch it during the Large-type training to confirm that it is in there.
Unlike the Hard Type, the Bag can be hung on top of the Protector.
The material is like a hard sponge, so it may be load-dispersing when hung from the top. (Actually, it is unknown).
As a Protector, I have never experienced a fall, but I have never felt pain when I bumped into the place where it was placed.
It is much more secure than the flimsy Soft Type.
It is lighter, more trackable, and less conspicuous than the hard type. Therefore, it is thought to be useful in reducing fatigue.
The yellow-colored PORON section still crumbles and immediately returns when strongly gripped, suggesting that its elasticity has not decreased.
Because of its good tracking performance, it is even easier to feel the ease of movement when used with inner-integrated products (such as KUSHITANI's Active series).
[Was there anything that disappointed you?
No defensive rating because no falls have occurred.
What are the specs of the product, such as protector?
The material can be used for POWERAGE, Rough AndRoad, and KUSHITANI jackets that we originally handled, and even if it does not fit into a jacket, cutting and processing is considered to be easy.
The yellow shock-absorbing PORON is sandwiched between a smooth black with Logo fabric and a fluffy black fabric.
It seems to be possible to use the Large portion for jackets and innerwear, except in cases where the shape is clearly different, such as in urbanism, as seen in stores.
How did it compare to other products?
Compared to the PlasticHard series, it allows the body to move freely.
The load on the body may be the same as that of the Hard Type, or perhaps even smaller, when only one contact with the ground, such as a standing fall, is required.
In the case of a fall involving contact with the ground after a fall, such as a fall while driving, and movement such as spinning or sliding, the protection is probably inferior to that of the Hard Type.
It is likely that this product will chip away faster than Plastic if it is subjected to a load that causes it to rub against the ground.
When he fell while riding in a hard type, his jacket was torn and the plastic part of the protector was also shaved off, but his clothes and body underneath were safe.
It is thought to be an option for use with equipment that does not appear to be Motorcycle equipment, which has been increasing recently, or when the purpose is not to run, but to move freely after running, but it is troublesome to take it off and move as it is.
A recommendation for those who don't want to be hindered in their movements but don't want to give up their defenses.
View detail
Winter Jacket for Touring
I am 164cm Waist 30Inch and size M was JUST for me. 3 Fasteners including Inner are closed but almost no wind comes in. The temperature was as usual in the Kansai region, and I was able to wear only underwear and a Long Sleeve Shirt under the Jacket. The bottom part of the Jacket is not exposed to the tank, so it is good to be able to ride without worrying about tank scratches. View detail
As an Upgrade for Elbow Protector
I bought it as Supporter, but I cut Supporter off and use only Protector out.
I would have liked to have been able to get Protector out without having to cut it.
So the color is Yellow color.
I hope that future buyers will think carefully about whether to choose SupporterType or Protector only.
I gave it 3 stars for protection because I have never fallen and been protected, but I am hopeful.
View detail
As an Upgrade for Knee Protector
I bought it as Supporter, but I cut Supporter off and use only Protector out.
So the color is Yellow color.
I hope that future buyers will think carefully before making their choice.
I gave it 3 stars for protection because I have never been protected by a fall, but I'm hoping for the best.
View detail
As a Protector Upgrade
Even if the insertion opening is small, it is good because it can be rounded off.
I gave it 3 stars for protection because I have never been protected by a fall, but I'm hoping for the best.
View detail