Reviews
A reliable one that can carry heavy loads.
I used it on my 2008 FXD. I used the License Plate Bracket to fix it on the Fender, but as expected, it damaged the paint of the Fender. It was good! View detail
After looking for a tail bag, I chose this one.
Used in KLX250.
I had been using a Laphro tail bag for about 8 years, but it was falling apart, so I looked for a new tail bag and chose this one. I couldn't find Laphro in the market anymore.
The Size was indeed wide from the review of my predecessor, so I tried to put it on vertically too.
However, since the shape of the fender is not flat, it doesn't fit in the vertical direction. As a result of this, I decided to use the Fender board (1.5mm thick aluminum plate) I made a "Fender&rarr" from the bottom and fixed it sideways with Fender→Guidebook→Bag. Because there is a guide plate, I could somehow fit in sideways. sometimes (Lol)
I think it has enough capacity for a toolbox.
What I'm interested in is the waterproof nature of this product. I don't know what is written in the instruction manual. (Lol)
View detail
It is decided stylishly.
The American Front Bag has a cool and stylish look and feel. The bag is made of cowhide leather and is compact but has a larger capacity than it looks. View detail
Performance number one in this kind of case!
I think this is the most user-friendly Case of its kind.
I used to use the Astro as a carry-on, but the Laphro has much more storage capacity.
It's large enough to hold all the stamen in my Main toolbox.
It can be used for both Compact and Dynamic.
View detail
Used as a front bag
I installed it as a front bag for REBEL. It's not very large, but it looks good for REBEL. View detail
It can be loaded in a compact size.
I use it to carry simple tools in case of sudden trouble while touring.
Select the minimum necessary tools such as Driver, Spanner, etc. and put the quantity under Seat:You can put all the tools together in the Compact so they don't get in the way.
View detail
Good to use.
I have a W800 and I don't have room for my in-car tools, so I installed this Tool Bag to put my in-car tools in it.
I like it very much from the point of view, but the Belt part that stops it has deteriorated a little bit, and I'm thinking of getting a substitute Belt for it because it will be torn sooner or later.
View detail
Personally, I'd like to see a little more Small
Purchased for the XR250
The Tanax Moto fizz ShellSeatBackSS I've been using has a height of 17 As high as 3mm, it's quite conscious when straddling a motorcycle
The legs that used to be able to lift in town riding get tired from driving in the woods, etc., and the SeatBack You will get stuck (Maybe it's due to the high Seat high and my age.)
The burden of taking off the SeatBack and carrying the luggage for it is Large
It's just easier to fix tools and other heavy and bulky items to the Motorcycle Nice Large sized piece of equipment
Decided on the product
It was only available in Inch display, but the capacity is about 3.2 liters, and it's a large size with a reasonable height and width
I thought it would be ideal if it were a little shorter in length so it could be installed horizontally
As the product name says, it is for a rear fender, but it comes with a Bolt, a Washer and a stopper Fix it to the fender with the Nut (4 places in a box)
It's easy to drill a hole in any place you want and fix it in place, but the product and Drilling a hole in the Motorcycle's Fender took the plunge (give up)
Well, there's a ring at the four corners that I don't know what it is, so maybe that will hold it in place..
I installed it on top of the Mojabi Side Back myself, but it's a little bit of weight in front of me I drilled a hole in the position and made a Rubber collar to reduce the gap between the Fender and
I fixed it so that there is no wobble in the Back and Bolt
There was still plenty of room in the KTC's Tool bag for air gauge, gloves, etc
Anti-theft locks can also be installed
Thanks to this tool bag, the Side Back has a raincoat, Tire wrench and Can hold Puncture Repair Kit, foot-operated Cylinders, etc So should you be able to handle Trouble on the go?
Large size of the Tool bag is 27.94cmX15.24cmX7.62cm
Toolbox, Mounting Bolt Set and Instruction Manual (Achara) With (word)
The inside is a stylish orange color
View detail
Convenient and Cool Storage Case
YAMAHA_VIRAGO250 but it's a motorcycle with no storage capacity
To hold spare brake lever, clutch lever and needle gold
Purchased
I've found less expensive ones in stores and on the Net
I saw other people's imprecisions and thought”I like this”and
I made a chase purchase
It was a good product that didn't lose its shape when I tried it out
View detail
Hard and fragile
I thought of Parenthesis as a toolbox, but the leather is too hard to open Hard …
After using it a few times, the plastic in the mounting area broke
View detail
The color fades quickly
I use it in a JA45CROSS CUB
It faded quickly in the sun, but I don't mind using it
I mainly put tools in it, but I can fit quite a bit in there that I need, so it's a Small Dice Motorcycle It's very useful when I'm strolling through the woods at
View detail
Kijima Classic Tool Bag
I ordered a tool bag to attach to my Super Cub C125. First of all, the thickness of the leather and the texture were good. When I installed it, it matched well, but it is so pretty that there is a risk of theft, so I think I need to change the fastening method of the fastening part. I would like to change the color of this bag to be stylish. Sturdy and good I ordered a toolbag for the Super Curve C125. First, the leather was thick and textured, and the price seemed expensive. I think the value is enough. I installed it, but it looks so good that there is a risk of theft. It looks like you should change the fastening method. As soon as I came out, I lightly creamed the leather cream, I am returning to the original color ... rain, wind, etc., the color of the room is stylish I want to change it. Strong and good translated by Google Translator View detail
Instead of MONKEY125SIDE COVER
I am using DHB-7 1.5L, but the capacity is a little short, so I am considering buying DHB-8
This one is only 2.0L, and from what I've seen, the only difference is the height dimension, so I'm not sure if it's a DHB-7
Large roughly calculated the height from the dimensions, and since it seems to fit nicely on the Right Side, I decided to buy it This was the case
One-touchBracket is used to open and close the top cover, making it very easy to open and close
It's not flashy in appearance and the design is not boring and will last a long time
The attached Belt seems to allow me to fix it in any position, but again, I didn't use it
For 2.0L, the Puncture Repair Kit for Tubeless and DRC foot wiping formula The Inflator and Air gauge are included
View detail
It's a bit premature
I've been wondering how to down type exhaust system of MONKEY125 I'm here, sir
You can just hide or decorate the empty space of the former Right SideSilencer It's a waste of time to do it (I found someone on the Net who has installed a similar tool bag, so let me refer to it (I received it)
Some Manufacturer The Right Sidewith Small PurseSide cover kit I bought this Tool bag to install it until they gave me a reasonable price for it
It seems to interfere with the Clutch Wire etc. if it is over 1.5L
The bracket is one-touch type and easy to open and close
Puncture Repair Kit for Tubeless Tire and Smallest Limits Tool It's a bit tricky because you can put a
I think it's safe to go away
Just fix it to your car with 2 bands, but when you install it to MONKEY, you can use
I'd like to put a twist on it (When I'm ready.)
View detail
Yippie Back
It is installed on the JA45CROSS CUB, but it has been designed for Quantity:Pair (for Left and Right) I wish I had it in
It's solidly made and turned out a nice color when I applied Wax
View detail
King of Tool Bag
What made you decide to buy?
Once purchased the Enduris Tan Tool Bag in Designability Bid Holder After confirming with the distributor, I returned the product to them Later it was found that the manufacturer had changed the specs without permission
I wanted to see the Enduris Tan in person and wanted more storage space for my own use, so I decided to use each We selected this product after comparing Manufacturer products
How was your experience with it?
Anyway, the storage capacity is outstanding compared to your typical Tool Bag or Tool Wrap
There are many Zippered Pockets that can be stored without losing small items
Even when you take the most tools with you, you can store everything but the air pump and the saw
This bag full of tools, this bag and air pompo, and a saw from Enduris Tan It can be stored in the XSBaseBag 6.5L
[Was there anything that disappointed you?
None The product exceeded my expectations
Do you have any wishes or improvements you would like to make for the Manufacturer?
If I ever buy a Tool Bag next, I'm sure I'll choose this bag, so keep making it! Please give me a copy
[Do you have any products to compare it to?
KTC, TONE, Trusco Nakayama, Enduris Tan, Others any We chose this bag for its storage capacity and affordable price after comparing manufacturers
[Others]
Tools in storage
24mm with Tire LeverWrench
17mm with Tire LeverWrench
・Tire Valve Driver
・Bead keeper
・Air gauge
・Bead cream
Combination wrench 8mm
・ 10mm
・ 12mm
・ 14mm
Socket 6mm
・ 8mm
・ 10mm
・ 12mm
・ 14mm
・ Bit holder
・Slide handle
・Ratchet adapter
・Extension
・Universal joint
BitRatchet Handlebar Driver
Bit Hex4mm
・ 5mm
・ 6mm
・ Plus PH1
・ PH2
・ PH3
・ Minus 4mm
・ 6mm
・Pliers
・Nipper
・Radio pliers
・Locking Pliers
・Plug wrench
One-Up STAND
Ballpen with LED Lamp
? Spare Plug
military gloves
Needle Gold
・Stainless Steel Wire
・Vinyl Tape
Tie Wrap 10 pieces
Iron Pate
Dustcloth, Vinyl bag, etc.
The above items can be stored without having to take the toolbox out for daily maintenance This bag alone can do quite a bit of work
I'll also bring a hammer, spare Brake and Clutch lever, spare Tube21in. etc., I'll bring a hammer, spare Brake and Clutch lever, spare Tube21in. etc. as well
View detail
Tool bag
I purchased one piece Kijima leather tool bag. Very nice and good quality product. Made of genuin leather. My 0.5 liter reserve cannister is fit. Thank you very much Webike staff. View detail
I use it as Handlebar Bag.
Originally attached to Rear Fender, Belt with One-Touch Operation Lock is Quantity : Because it is with 2pc, it seems that it can be installed even if it is not Rear Fender.
When attaching Tank Bag to the MT - 09 tracer I was searching for Porch which is installed around Handlebar absolutely because the style is bad.
It is not bad as it is fitted to the Racer's Handlebar in dimensions and it is handy for taking in and out of a smartphone or a wallet.
Installation Belt can be installed securely because it can be adjusted in length, it did not flap on the highway.
There is only one point, Waterproof nature. WaterproofFastener is not attached.
It seems like a product made as a Tool Bag that only inserts tools, and seems to be unable to put things that should not get wet.
That is the star Minus 1.
Others are satisfied.
View detail
It suits XSR 900!
I attached a Seat bag and had Rain jacket and a thin windbreaker Inner, but usually I thought that I wanted to remove the Seat bag.
Capacity is just a good size because Rain jacket & windproof Inner was enough.
Because you can adjust the capacity with Belt, this is enough for nearby touring.
I think that Design also matches XSR 900.
I brought the installation to the position where I could not get through the gap of the Seat frame somehow.
* Since it is hanging from the Seat frame and the bottom of Bag goes inside, attach it so that it hits the BagReverse side and fix it lightly with Tie Wrap.
View detail
Back is the best Cospa
BackBody, texture - capacity - I think that COSPA looks pretty expensive. I'm putting onboard tools and Rain Wear. But the problem is mounting Belt! Just put a bit of heavy things, it seems to be loose when running, I am afraid. I fixed the Sissy bar so that I could afford to Belt whom I had troubled with the installation location, and joined the Belt in inside. If it does not improve within that, it may not be good. View detail