Reviews
It's better to install the ball side first. Apply anti-looseness.
Used for long arms. It's pretty good.
It's better to install the ball side first with Screw Lock or other anti-loosening material.
View detail
Purchased with interim implications.
The plastic ones are a bit weakly made, even if they are convincing.
It is difficult to understand the fit between Case and Bracket, and Case flew once. (Fall Prevention Strap is required.)
Don't put too much pressure on it.
Cost is good for both price and work, maybe enough for people who don't have a lot of pressure to run.
View detail
If you won at Rose, you definitely need to buy this one too!
The Ram Mount is a white product that can be combined in various ways, and since I bought it in a combination, I didn't buy this rubber grip.
I didn't know what I was going to use it for in the first place.
There was a significant bump while touring at high speed, and when the motorcycle was rocked, the phone fell out of the XGrip with difficulty, and I managed to hang on to the charging cable and get out of it.
I've been using this product ever since. (When there's a risk.) I use it
It's essential.
My heart really felt like it was going to come out of my mouth at that moment.
View detail
It needs a lot of work, but it's a good cosmetic. (I wonder?)
First, I had to cutters to fit the optional Smartphone Holder. In addition, when I used it for several months, Button of Holder release did not work, so I Rose and Grease up. It is necessary to work on various things, but the cosmetic is not bad. View detail
Is 10Inch too big for a Motorcycle?
I used to use the Navigation app on my phone, but I was worried about rain, so I bought this product to make a waterproof Brett. 10Inch is easy to read on a motorcycle, but it's too big. 7Inch is about the right size. Nah. As for the details, the Rubber on the Holder tore and the Rubber on the Open/Close Lever was glued back on, but it was gone before I knew it. View detail
Used for Drorecorded Camera
The camera bracket of the Chinese Drorekos was not reliable because it was made of plastic, so I diverted it.
Quantity Camera through the bar originally:Set, I had to bite the Rubber board because it was not thick enough.
The angle and the tightening of the bar are the same.
It was a bent steel plate with a low texture and the price seemed high.
It's not rigid, so I think it's better to limit its use to light GPS and ETCAntennas etc. in its original use.
View detail
I'm glad I bought it
I bought it at the same time as the Navigation System Case KS-212A and installed it. I was worried that it was not fit to KS-212A, and it was written in the review of other sites that it was cut down a little.
I wanted to have a place to pass the Wire or something to prevent it from being dropped or stolen, even if it's unlikely.
View detail
I wonder if it's good for the price
LEAD Industries' "Glass Maholder I bought this for the installation of the
If it was about $2,000 for the Holder and Bracket, it was a trial run
When I actually installed it on the Motorcycle's Handlebar, it looked like it would hold it in place It is However "Chica La will be required, though (laughs)
I'm looking forward to attaching the Mobile phone to the Holder and running it for real
View detail
Happy!
Touring, and without knowing it while driving, one of the Rubbers flew away and I was in danger of finding myself in My phone was about to fall off
I ordered a Rubber in a hurry!
Ram Mount has a Parts sale, which helps
I installed it right away
I even glued it well this time!
View detail
good
With the RAM Mount, it's a rubber for smartphones purchased for Daytonaradar installation It's too tight and tearing, so I chose this one? It came out good! View detail
You might want to replace it regularly
A few years after purchasing the XGrip, when I got over the Large Gap, I was able to get it from the Holder
It had become a rare occurrence for the phone to drop out
As the surface of the rubber cap has become hard and slippery with age
I felt it, so I bought a new one to try it out
When you touch the new one, the surface is soft and chewy
Holdability seems to be obviously better than the one that has changed over time
So far, the dropout has not recurred
I was considering repurchasing the XGripBody, but it looks like I won't have to
View detail
theft deterrence
As Ram Mount explains, I expect it to have a deterrent effect on theft
Now I just hope it doesn't break in future use
View detail
Grip strength is great!
The hardness is moderately good and the Grip power is great
I'm using it now, but one is gone and I've purchased it to replenish
Maybe it's the Collector? I'm plucking I'm so hungry
I hope you are not a Motorcycle enthusiast May heaven help you!
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja H2SX
It's perfect fit.
It's the right size, but it's thinner than I thought. It's hard to resist. I wish it were a little thicker. Shipment will arrive faster than you thought when you leave. Packing is complete and satisfactory. View detail
Fits: KAWASAKI 1400GTR, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja H2SX
very good
We purchased two and installed them. Very good. It's very good quality. I'll buy it again. It took me a while to sell out. I'm very satisfied View detail
good
The original Grip that came with it is gone, so I bought it
I glued it on tightly and made it hard to lose
If you're using the same Mount, it's a good idea to have a spare
View detail
Large I like it
The actual running is not yet, but it is fixed firmly, and the installation rubber part is soft but firm Hold is ready
We will check for shaking, looseness, etc. when the car is running
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja H2SX
Gourgo Montissho 1000 Chaos
Purchase to attach Smartphone Holder. I think that it is an interesting product.
Because it made it Black, it seems that there is not much discomfort even if I remove the Smartphone Holder..
Screw lock A lot of paint is painted,
It is quite a Torque.. Prepare 8 mmHex so as not to lick.
I think that it is better to mark the Handlebar angle before removing Screw.
It seems that it can also be used for movie shooting with ActionCam.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI Ninja1000, KAWASAKI Ninja650, KAWASAKI Ninja H2SX
Mobile navigation bracket extension tube is practical
When I didn’t install the mobile phone, I used a normal mobile phone navigation bracket, but the jitter would be very bad after the speed reached about 140. I tried to fly out when the mobile phone reached 170, and then it was useless. I got the navigation bracket. Later, I saw a mobile phone navigation bracket for Kawasaki Ninja 1000 on webike. I started with it decisively. After I used it, IKEA flew to 200 without any problems~ When I did not install it, I used the mobile phone navigation bracket of the ordinary mobile phone, but the speed would be very good after the speed of 140 or so. I tried to fly to the mobile phone when I ran 170, then I used the mobile phone. Navigation bracket, and later on the webike saw a corresponding Kawasaki Ninja 1000 dedicated mobile phone navigation bracket, decisive start, after using up, IKEA flew to 200 no problem ~(translated by Google Translator) View detail
GPS Mount
Bought the Zumo GPS mount for the 2017 Ducati SuperSport. Excellent fabrication/machining. Mounting plate is adjustable for angle and the mount has the exact amount of clearance for the GPS. Highly Recommend View detail