Reviews
He thought that he made appearance a clear and wanted to make it SUKKURI, and bought it! Good a [point] and price are cheap! Since the kind of a model or motorcycle appears in the flesh side. With [ if it chooses so that it may not make a mistake ] no
He thought that he made appearance a clear and wanted to make it SUKKURI, and bought it! Good a [point] and price are cheap! Since the kind of a model or motorcycle appears in the flesh side.
With [ if it chooses so that it may not make a mistake ] no problem! If it will be OK if you buy it in Webike, but you buy it in a store, they will be right-and-left cautions! It - Attaches and easy! It is easily exchangeable if there is a driver.
If it makes into a clear lens whether to call it a bad point, it must do! It is necessary to make - transparent valve (electric lamp) into orange.
If it does not change, it will be caught in an automobile inspection or the police as unfixed vehicles.
I think that it became legible more brightly when it was itself, although it was the visibility after exchange.
Daytime is also intelligible in beautiful and bright orange.
It is clear lens x4 at all the blinkers of a motorcycle. Before or after electric lamp x4 (since order specification is different, it is check required at time of exchange) a total of 4,000 yen ... Since it can do custom simply and can do comparatively comparatively cheap, anyone thinks that he is recommend goods made first.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100R, KAWASAKI ZRX400, KAWASAKI GPZ900R, KAWASAKI GPZ750R NINJA, Others
Since a dress-up up and an authentic positive one felt it dark, it exchanged. Although the attachment object in particular was not difficult, since cleaning in a cowl was also mixed, it took about 1 hour. Although it is the touch with which it equ
Since a dress-up up and an authentic positive one felt it dark, it exchanged.
Although the attachment object in particular was not difficult, since cleaning in a cowl was also mixed, it took about 1 hour.
Although it is the touch with which it equipped, it becomes bright (it does not become bright dramatically like HID), and a run of night is also safe.
Moreover, since it is lighter than normal, Wright and a cowl think like ZRX that they are effective for the motorcycle mounted by the handle.
The automobile inspection was also satisfactory.
It is very much satisfied.
View detail
Fits: HONDA CB400 FOUR, HONDA CB400 VerS, KAWASAKI ZR-7, HONDA CB500F, Others , KAWASAKI BALIUS II, KAWASAKI BALIUS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA HORNET250, HONDA VTR250, HONDA CB400 SF
Attachment was very easy. It only exchanges for a pure unit fundamentally. however . since it is a general-purpose article of HONDA and KAWASAKI, if it makes a mistake in attachment of a rim, a screw does not pass -- there may also be a mistak
Attachment was very easy.
It only exchanges for a pure unit fundamentally.
however .
since it is a general-purpose article of HONDA and KAWASAKI, if it makes a mistake in attachment of a rim, a screw does not pass -- there may also be a mistake very.
In HONDA and KAWASAKI, let's keep in mind that a rim becomes an up-and-down contrary.
How I also attach HONDA to ZEPHYRchi has been carried out.
Although brightness was compared pure and UP was carried out markedly, since the boundary line of light clarified too much and there was also a dark place, four stars were used.
View detail
A zoomer (ruckus) is pure, since the fuel gauge does not stick, residual quantity is not known, but if the remainder decreases, an alarm lamp will light up. Although this was enough once, since it thought whether it would be more convenient in somethi
A zoomer (ruckus) is pure, since the fuel gauge does not stick, residual quantity is not known, but if the remainder decreases, an alarm lamp will light up.
Although this was enough once, since it thought whether it would be more convenient in something to understand correctly, it attached.
Although all required things were equal to attachment, if attached components are used, in order to jump out of a handle, I purchased the stay of L shape in the home center, and attached beside the speed meter.
It is convenient unexpectedly that residual quantity is known, and although appearance also became smart, since illumination turns on only the upper part which is a meter, the fuel gauge itself is 1 now in design.
View detail
Moto garage RIMOSHON HID Hi/Lo 4300K was attached to the katana 1 type in 1982. Although various other manufacturers' HID impression, etc. were seen at the time of purchase, it decided by that the thing and price with very sufficient impression of thi
Moto garage RIMOSHON HID Hi/Lo 4300K was attached to the katana 1 type in 1982.
Although various other manufacturers' HID impression, etc. were seen at the time of purchase, it decided by that the thing and price with very sufficient impression of this product are handy, and the guarantee during two years.
About actual attachment, although it was simple, the number of components also regards the description as few, it depended for it, and it has attached it easily.
It is whether to have not taken pains over the mounting space of the ballast, since my katana had merely removed the air cleaner box, but to worry about a fitting location in case of a normal state .... (attachment purchased and attached general-purpose stay from the home center)
And although the control unit is stuck with the double-stick tape of attachment in a cowl now, I wish to attach it more firmly individually (using stay etc.).
The used comment became very bright compared with normal (it is natural), and it has satisfied them very much.
It cannot return to a halogen bulb any longer (truly).
Certainly [ since it had the influence on an oncoming car etc. when Wright merely became bright, way it carried out optical axis adjustment perfectly ].
Since the day is shallow after still attaching, durability cannot be judged, but a night run is likely to become pleasant!!
View detail
Since the tail lamp which was being used until now was out of condition, it purchases newly. How to attach was also easy. Although it was a smoked lens, it was good at intelligible luminescence.
Since the tail lamp which was being used until now was out of condition, it purchases newly.
How to attach was also easy.
Although it was a smoked lens, it was good at intelligible luminescence.
View detail
It is a material required for those who are making the electric system themselves. There is also no problem in particular and it can use it. The recommend of a direction to attach the distinction of a plus and a minus to exactly purchasing black a
It is a material required for those who are making the electric system themselves.
There is also no problem in particular and it can use it.
The recommend of a direction to attach the distinction of a plus and a minus to exactly purchasing black and red is carried out.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100R, KAWASAKI ZRX400, KAWASAKI GPZ900R, KAWASAKI GPZ750R NINJA, Others
Although I equipped zrx400, compared with normal, it becomes bright and light spreads horizontally for a while. And I think that it is very dazzling when Wright of his own motorcycle is seen, and it becomes an avoid accident from the road side. If
Although I equipped zrx400, compared with normal, it becomes bright and light spreads horizontally for a while.
And I think that it is very dazzling when Wright of his own motorcycle is seen, and it becomes an avoid accident from the road side.
If a weight is also compared with Wright of a pure glass, it will completely become light.
Although the attachment description of the motorcycle was usually unclear although it was attachment, and I always worried, except was able to be intelligibly equipped with this product easily.
In the direction of liking to tamper with a motorcycle by oneself by Ho, beginners, it is recommended.
View detail
Fits: その他 , HONDA CB400SS, YAMAHA SR400, YAMAHA SR500
It exchanged, when changing a headlight. In the case of SR, the diameter of Faulk is phi 35. Exchange of light stay is required for a separate handle also in the case of exchange. Although I think that appearance has liking, since the bali on
It exchanged, when changing a headlight.
In the case of SR, the diameter of Faulk is phi 35.
Exchange of light stay is required for a separate handle also in the case of exchange.
Although I think that appearance has liking, since the bali on the back worried it for a while although the goods themselves were ground finely, it will be set to *-1.
View detail
![Digital Meter Bracket [TYPE B]](https://img.webike-cdn.net/catalogue/10317/414-011-0400_image-1_TS.jpg)
TYPE-B was purchased as a result of wavering with TYPE-A. Since attachment vehicles were the ducatis 998, there is no space in the circumference of a meter, and it attached to the bolt which is fixing the tachometer. It was able to attach very fin
TYPE-B was purchased as a result of wavering with TYPE-A.
Since attachment vehicles were the ducatis 998, there is no space in the circumference of a meter, and it attached to the bolt which is fixing the tachometer.
It was able to attach very finely, without a bracket overflowing and appearing, even after attaching, since it was a size which carries out a just fit to a multi-temp meter.
Moreover, according to the product made from carbon, since it was lightweight, it considered during the run that vibration occurred in other parts, but there was no such thing at all.
Although it is small parts, there is only a product made from a yoshimura truly and rigidity is also solid.
It has fitted in the tachometer right-hand side of 998 finely, and since it can be used after the circumference of a meter has felt it refreshed, it is very much satisfied.
They are parts which are recommended fixed places and it makes especially the direction that has ridden on 916 systems regard as it using for a trial very much.
View detail
It is used for the cub C90. Since use of the rear normal blinker of a cub had become impossible, what is likely to be attached simply [ it is not so large and ] was looked for, and this was found. Since it is a rubber with a soft portion of stay,
It is used for the cub C90.
Since use of the rear normal blinker of a cub had become impossible, what is likely to be attached simply [ it is not so large and ] was looked for, and this was found.
Since it is a rubber with a soft portion of stay, it does not break, even if it collides somewhat.
Although it is very pleasing in the size right individual just, from the friend who runs together, it is too small and it may be said that it is hard to see.
View detail
It has attached to MF08 forza. Since the pure halogen bulb was too yellow and disagreeable, it was changed. There is no blueness, and although it is quite close to white, when seeing from layman's appraisal, it has been said that it does not chang
It has attached to MF08 forza.
Since the pure halogen bulb was too yellow and disagreeable, it was changed.
There is no blueness, and although it is quite close to white, when seeing from layman's appraisal, it has been said that it does not change that it is not much pure.
An authentic positive one is a recommend at too yellow a person [ blueness ] ... if it is GT-X and XREME but.
View detail
It is light! It is thin! It contributes to the small size ! and a weight saving. It seems that there is no problem also in reinforcement although the hole was made in this side and the blinker is attached directly.
It is light! It is thin! It contributes to the small size ! and a weight saving.
It seems that there is no problem also in reinforcement although the hole was made in this side and the blinker is attached directly.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
It is tabular, and since it is sent, you have to twist around Faulk by yourself. Although it is difficult to unite just, it will be OK, if it does carefully since there is nothing also so firmly. Since most was steel and was a combination type of
It is tabular, and since it is sent, you have to twist around Faulk by yourself.
Although it is difficult to unite just, it will be OK, if it does carefully since there is nothing also so firmly.
Since most was steel and was a combination type of two sheets, other manufacturers' thing considered corrosion resistance and appearance, and used it as this product.
View detail
He wanted to make the headlight of XR250 bright and the tail lamp and the blinker were LED-ized. An LED blinker requires IC relay. Since this IC relay operates [ an electric lamp or ] and also blinks [ LED, electric lamp mixture, or ] perfectly, i
He wanted to make the headlight of XR250 bright and the tail lamp and the blinker were LED-ized.
An LED blinker requires IC relay.
Since this IC relay operates [ an electric lamp or ] and also blinks [ LED, electric lamp mixture, or ] perfectly, its sudden ball piece is also safe.
View detail
Fits: DUCATI Fits to MONSTER [Monster] 00-04 series (does not fit to some model year square type blinkers), DUCATI Fits to MONSTER [Monster] 00-04 series (does not fit to some model year square type blinkers)
It attached to DUCATI M400 of 04 models. A required tool is OKed only by a plus driver. What is necessary is just to attach in an opposite procedure when it removes, since there is a close resemblance between form and a pure lens. It seems tha
It attached to DUCATI M400 of 04 models.
A required tool is OKed only by a plus driver.
What is necessary is just to attach in an opposite procedure when it removes, since there is a close resemblance between form and a pure lens.
It seems that it sounds since he gets hooked while a screw makes a slot at the time of attachment PAKIPAKIPAKIPAKI, but it is satisfactory.
He has a feeling it is better to attach after removing a screw and taking out waste, since waste is sometimes got blocked.
However, it becomes a form out of which it comes and which is felt, and is inserted in forcibly where width is somewhat larger on the whole.
if a little portion on which he gets hooked a lens body is deleted since it becomes the touch which floats from a main part a little as a result -- SHIKKURI -- ball measure.
It seems that it is OK since it does not separate at the time of a run even if it does not do so.
I think that they are made goods which can be satisfied since it became a refreshing and a stylish after wearing.
Since it can do custom at a low price with a little less than 3000 yen in order, I regard what a hand tends to take out as it being charm.
A using feeling thinks that blink came to stand out from the blinker of normal.
View detail
Since the rear fender was large and there was no light feeling, DR-Z was purchased. I think that the direction which is attached and can be improved to some extent as Ho can be attached with Quan Tan. I think that it became the appearance which ba
Since the rear fender was large and there was no light feeling, DR-Z was purchased.
I think that the direction which is attached and can be improved to some extent as Ho can be attached with Quan Tan.
I think that it became the appearance which balanced the engine performance of the run as attached comment.
Although there is no telling how be daytime, it is about [ dazzling ] night.
Although durability is not known yet, I purchase and think that it was good.
View detail
The circumference of beam comment with purchase and rear one is a refreshing because of a dress-up up and power saving. - A number plate also shines finely palely and a stop-lamp also comes on sharply. (The lamp of a number plate is bright in the
The circumference of beam comment with purchase and rear one is a refreshing because of a dress-up up and power saving.
- A number plate also shines finely palely and a stop-lamp also comes on sharply.
(The lamp of a number plate is bright in the purer one) It seems that water has not flown even a rainy day at the back although - mudguard was removed.
(It is ... although mud is not known) Although attachment is easy, a plug is required for it.
It is because the attached plug is not so good in order to change one terminal of wiring.
View detail
Since the overhang of a normal blinker was worrisome, it purchased. although the register kit was also purchased collectively, in exchange of a rear chisel, it is unnecessary -- it was . A good point: A parenthesis of - appearance is good. - A
Since the overhang of a normal blinker was worrisome, it purchased.
although the register kit was also purchased collectively, in exchange of a rear chisel, it is unnecessary -- it was .
A good point: A parenthesis of - appearance is good.
- Attachment is easy at double-stick tape (depending on a place, the drilling process for wiring is required).
- Repair parts can purchase with a components single article (I think that this is very conscientious).
A bad point: The cover is not attached to - plug terminal.
although it is mere dress-up parts, subsequently it is alike, and air resistance also decreases, and begins to meet, and it is very pleasing individually.
View detail
do you change and understand immediately -- when it changed white from the pure (smile) yellowish color, it was visible to the race ish, and, of course, the visibility of the run at night also went up. The riding of night became pleasant.
do you change and understand immediately -- when it changed white from the pure (smile) yellowish color, it was visible to the race ish, and, of course, the visibility of the run at night also went up.
The riding of night became pleasant.
View detail