Reviews
Fits: YAMAHA tricker, YAMAHA CELLOW 250, YAMAHA tricker, YAMAHA CELLOW 250
GOOD!!!
Purchase compared to OEM and other Other Brand Products.
The Material is Stainless and rust resistant. The wall thickness is also thick, when I stepped over the tree, it became a balance, but it was surprisingly stable, it was large to pull it out.
Cost is good and if you are hesitant about the price, try it. It doesn't look or look obvious, but it does the job well.
View detail
Fits: KTM XC300, KTM XC250, HUSQVARNA TE250, HUSQVARNA TE300, KTM EXC250, KTM EXC300
Essential Items to Protect the Chamber
I have been riding HUSQVARNA TE250 and my Chamber gets dented a lot, so I decided to use this product which has both functions of skid plate and chamber. It protects my chamber and lower belly and I can ride in rock section without hesitation.
View detail
Parenthesis was good.
The construction is solid. But there are 2 kinds of Bolts and 2 kinds of Spacers, so it is hard to install. The front side Bolt was too short, so I installed another Bolt appropriately. View detail
If you want to go off-road.
I purchased this for Off-Road.
If the vehicle is left in NORMAL mode, there will be an unexpected failure of the vehicle if a small stone is splashed or hits a rock, so the Hand guard and Quantity:You can buy it as a set.
It's easy to install and doesn't require any modification, etc.
There is also an OilDrain hall, so you can change the oil as it is attached, but you need to wipe it clean after changing the oil because the oil will be on this plate.
I think it will look and feel cool, so even if you don't run off-road, it's good for dress-up.
While driving, vibrations can make noise.
View detail
Old model (JA Type 10) Can be CROSS CUB!
Old CROSS CUB (JA10 Boss gray metallic) I'm on the
No matter how much I looked for it, I couldn't find any information on it, so I became a human pillar. lol
Exhaust System is from Yamamoto racing.
The price is not that much different from Under frame, so I guess it's a matter of concern, but I bought it hoping that the Engine will cool down a bit.
However, I think there is a possibility of contact with the Leg shield due to individual differences, so please use your own judgment when purchasing.
View detail
It's not as obvious as it seems.
The k-FACTORY Under Guard covers a wide range of areas up to the front of the LINK on the rear suspension.
The fitting is good and the Grommet is included, so you don't have to worry about the vibration of the Engine causing a jumpy sound. Installation is easy.
Because the hole is provided at the Drain bolt position, you don't have to take it off when you change the oil.
View detail
It's installed as normal.
The review said it needed some work, but it was installed without any work.
I'm thankful that the
View detail
Accuracy is good.
The OEM is Pe LePera, but it is thicker and more luxurious.
It is more comfortable to adjust with Washer and color depending on the individual.
I installed it after adjusting it with color and Washer.
It is easy to work with because you only have to tighten the screw.
View detail
Under Guard that covers a wide area
I installed it on SEROWFinal edition.
Large Under Guard that reaches to the EngineRear.
Only four bolts are required for installation, with no modification
If you follow the Instruction Manual, you'll be fine … but if you're clumsy, you'll need to use
It might take a little bit of work (;^ω^)
It's well made and has a hole in the bottom of the drain bolt
It is not necessary to remove it to change the oil.
View detail
I like the look of it.
The standard Under Guard was replaced because it would soon become rusty and rusty even if it was washed and polished.
It's Stainless Steel, so it's hard to rust and look like a NORMAL. Stylish and I like it.
It's completely self-satisfying because if you look at it normally, you won't notice the Parts at all.
The maintenance person at the motorcycle shop noticed the quirks, but My Motorcycle friends won't notice unless I tell them.
View detail
Pretty good
Personally, I would give it a near perfect score
Something about Fitting was bad, the Review said, but Balance the Bolt If you close it well enough, it will fit!
The past Reviewers have been terrible at putting it on or no problem at all
View detail
This is not compatible with the SEROW250 after 2018
First, this product is for pre-2018 vehicles prior to exhaust gas measures
Why at We-Big? "Indications in
ZE55-2470 for 2018 and beyond Please note
Amazon's comment said it would be attached if I processed it, so I took it on faith I processed it, and then later on I processed it
I did my best to put it on because I can't return it anymore
If you've machined it, the Bolt holes will fit perfectly, and it will guard it well It looks (and welds, etc.) beautiful
There is no Instruction Manual or anything like that, but with four Bolts (& Washer) It's just a stop and it wouldn't be necessary
I think it would have come on easily if I hadn't gotten the part number wrong, so I gave it a perfect score I will check the part number before ordering in the future
View detail
Fits: HONDA XR250 Baja, HONDA XR250, HONDA XR250MOTARD
Safe on forest roads
The product has high processing accuracy, and although it is not impossible to be able to pontificate with only the accessory parts, the Spacer and It would be better to add a rubber packing for a better fit
It will protect the lower part of the engine and oil line, etc. firmly, so that it can be used on the forest road It's safe
However, like the OEM Under Guard, it is not easily removable
It's a good price, but I bought it to take advantage of the Point redemption period before it became difficult to get parts
View detail
I wanted a Lineup in body color
I bought it when I saw the imprints that can be done without removing it when changing oil
However, I just didn't like the Chromium Plating, so I decided to go with a car that was close to the body color I painted it OD color
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250XC, SUZUKI DJEBEL250XC
The accuracy of the mounting holes is poor
It was installed in DJEBEL250xc, but the 2 places of Rear mounting holes of Skid plate are It seems that the position of the "*" is wrong and there was a processing error at the manufacturing plant
Even a DJEBEL250xc I know comes with a Rear, 2 holes in the wrong position The holes are drilled in the Nut position of the Bracket and installed with a drill
The holes can be drilled with Drill or Screw for spray can drilling and then processed with a stick file It is
Also, the fixed nut is fastened to the skid plate with four Inch screws for cleaning, Oil It's not very easy to replace
I bought 4 Inch Bolts at Home Center and replaced the OEM screws with Bolts It is
I've written a lot of bad things about it, but I've drilled a hole and two misplaced holes for vehicle protection Seal it up with a seal, etc
You can use it as a skid plate
This is the only skid plate for the DR and DJEBEL250xc that I can find right now If you are capable of drilling, this product is recommended
View detail
The imprint was highly rated
The texture and thickness were exactly as I expected before the installation I think it is possible to install it As for the installation, I used the rubber sheet to prevent the scratches on the frame I will View detail
Good item
Particularly good points
It guards the front and bottom of the crankcase cover and looks sturdy
There is enough clearance to prevent the heads of the four mounting bolts from being crushed by flying stones
The mounting bolts and washers are stainless steel
There is a drain hole for oil for replacement When removing the oil, the oil on the skid plate (both with the bike upright and with the side stand) will be released on the skid plate It's not clear if it doesn't take on
It's a matter of course, but I was able to install it without any processing
It was in a crisp plastic bag to prevent small scratches The sponge was good to use as a knee rest during installation
Not so good
The engine's mechanical noise reflects off the skid plate and I'm particularly concerned about the noise in the high frequency range I will, but I forgive you
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250L Type LD
Undercarriage, Frame protection
I bought it for my CRF250L
When my partner decided to buy a CRF, I first thought I would need the Hand guard and Skid plate I've prepared it in advance
This is the second time
The first is for my KLX and this time for my partner's CRF
I think you should only use Screw stopper for installation
View detail
Fits: HONDA CRF450RL, HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450L, HONDA CRF250RX, HONDA CRF250R
Except for Cost, Large strange GOOD!
I'm glad that the LEAD time from order to delivery is so short, and I'm glad to see that it's a large change View detail
Tlr200 Reflex skid plate
This is a great skid plate. I would have given 5 stars if it hadn't needed some fitting and spacing to fit my bike. It needed 3/8" spacers at the rear and a thick 1/8"washer at the front. I would still very much recommend this plate. It is wide and flat and thick which is what we want. Shipping was pretty fast too considering this seems to be kind of a rare part and had seen it out of stock on other websites. View detail