Reviews
In the Aftermarket parts Exhaust System
Regulation Exhaust System also personally did not like volume and sound quality a bit, so roll Stainless wool around Stainless mesh. The high-pitched sound which is harshly disturbed by sound quality was absorbed and it became soft sound quality. It changes considerably by winding the Stainless Mesh and fixing the Wool. Inside the normal Sound-absorbing Mat (Outside of Exhaust System Core) It would be better to wind up and use it in conjunction with Glass Wool. View detail
You can exchange easily without having to wrap it in Inner pipe.
55Φ×250mmQuantity : Quantity with 2 pc and 30 missing : 2pc. SetCut
Set to Inner pipe 280 mm.
Stainless Steel Wire is attached and fixed in 4 places
is.
Can be exchanged faster and easier than wrapped Type.
View detail
it is normal.
There is no special mention. Inner punching 450? I used one for a thing with a Length, but it was just a good length. Since it is used before rolling Glass Wool, there is no silencing effect with this Single Body.
It is preferable to use outdoors because extremely fine squirrel comes out when winding.
View detail
Useable.
MONKEY I installed the Exhaust System outside the place I got more than I expected volume, so in the Silencer Exhaust pipe Space in the back of the plugging part, rounded StainlessPunching metal Wrapped Steel wool, Glass Wool around the outside Stainless Steel Wire and fixed it.
Because it is dislike when it comes to resistance, Punching metal wound Large more than the inner diameter of Exhaust pipe.
The sound is suppressed throughout the whole area, plosive sounds in the middle and high speed areas that I was particularly concerned have disappeared considerably Large satisfaction.
Stainless's Steel wool is saved because it is not placed in the home center etc..
Although I do not know about durability yet, as I did with another vehicle type the same way before, I did not scatter more than 4000 km, probably Large durable?
I will check if the sound becomes loud.
View detail
Fits: HARLEY-DAVIDSON Universal
To Silencer Refresh of CR80
In order to divert the CR 80 Silencer to the CRM 50, we acquired second hand and selected this product for reference of that other's reference for that Refresh.
Main wound up with Ceramic coating of DAYTONA and rolled up the missing part with this product.
Since the sound does not change much even after winding, I think that COSPA is good.
View detail
It will silently sound
External system outside the company is a bit annoying, purchase for the purpose of muting.
Description and Material : Because the needle Gold of Stainless Steel is also attached, it is appreciated that it is easy to set.
The Glass Wool has a direction to set, so that the fiber surface is brought to the downstream side of the exhaust, and then the needle gold is wrapped and the work is finished.
Set exhaust sound, it is silently muted and I am very satisfied..
However, although I do not know how long aged deterioration is, since the price is very cheap, I think that it is unnecessary to worry much about deterioration condition after exchanging since it got worse.
View detail
Fits: HARLEY-DAVIDSON Universal
Volume improvement of Exhaust System
Because I felt that the volume of the Exhaust System which had not exchanged silencing material for over 10 years was getting louder, purchased for Japanese Vehicle Inspection Correspondence.
In order to reduce the consumption of Glass Wool, we rolled CeramicWool 2 turns and then wound up the Gloucescool for NeoFACTORY's Exhaust System to fill the gap of Exhaust System.
I think that this combination is very good durability and Cost's Balance, and the volume at the time of purchase - I think that it is possible to pass a vehicle inspection without problems because it is close to sound quality.
View detail
Why not?
Purchase for winding on Baffle.
With needle gold, scattering is difficult, if you match the price with Large price pear.
When storing it in excess, let's keep it with Zip lock.
View detail
Used for MORIWAKI muffler
Buy Size because it is not quite long.
After all it was not enough capacity (Lol)
MORIWAKI's Exhaust System has a long cylinder. I thought about attaching it firmly This is Quantity : I need 2 sets. This time we made it alone in time, but it became quieter than I thought.
View detail
Two cars were replaced
There were 2 RSV equipped vehicles in stock at the same time.
Because both exhaust sounds are broken.
There were only about 30% left in both, after replacement it sounds good.
It is better to buy this product if you think of hardship than winding with DIY it is an ellipse.
View detail
Koshiba Naiko
I think that it is cheap and enough amount.
Slash Cut Exhaust SystemQuantity : 2 pc can afford.
He is doing a good job.
Until now it was rolling Glass Wool to exhaust interference type and used it.
Recently I wanted to quiet the sound more recently, I made Glass Wool a little extra on the Silencer that I had originally attached, made my own Baffle at the exit and squeezed the exit.
The sound fell to the extent that NORMAL was slightly larger than Large. It took a certain amount of deep bass and the residual pressure, finally calmed down.
View detail
Recommended for for Repair!
I purchased it for Drag pipe for repair. Since the fixing needle Gold is also attached, it is recommended because it can be installed immediately. As Glass Wool is a consumable item, those who are looking for something of lower quality and lower quality think that this product is good. View detail
The Glass wool of RD50 which passed 30 years was hard like a stone in the Oil.Since the sound deadening effect was also lost by the secular change, they are a Glass wool of a KIJIMA, and exchange.In the case of RD, width was started to 10 cm and long 20cm
The Glass wool of RD50 which passed 30 years was hard like a stone in the Oil.Since the sound deadening effect was also lost by the secular change, they are a Glass wool of a KIJIMA, and exchange.In the case of RD, width was started to 10 cm and long 20cm, and was fixed to the Silencer by the Stainless wire.The
exhaust sound became low a little.Since the Glass wool is the shape of 5-mm-thick cloth, processing is easy.Since an exhaust port will be choked if it winds merely not much thickly, certainly fixing is important also for one layer.
View detail
[Webike Monitor] It was used when the old YOSHIMURA Silencer was welded and attached to GPZ 900R. Since it produced when he wanted to take out the atmosphere of the ancient times, but it was a MODEL of Saki of sound-volume regulation, s
[Webike Monitor] It was used when the old YOSHIMURA Silencer was welded and attached to
GPZ 900R.
Since it produced when he wanted to take out the atmosphere of the
ancient times, but it was a MODEL of Saki of sound-volume regulation, sound volume was large, and since it was mourning also over the Glass wool which was contained from the first, it purchased, and attached.
Although the thing with the large
Size was purchased, the direction to the extent that it remains rather than small thought that it was good.
View detail
Since the Steel wool and the Glass wool are a Set, it is more profitable than buying it independently. It was used for the Repair of the Silencer with which the Glass wool has blown away.
Since the Steel wool and the Glass wool are a Set, it is more profitable than buying it independently.
It was used for the Repair of the Silencer with which the
Glass wool has blown away.
View detail
I purchased simultaneously with the sound absorber exclusive for a trumpet muffler of the same company. It is hard to twist, although attachment is easy as the description. It cannot muffle, although the glass wool attached at first was also wrapped, a so
I purchased simultaneously with the sound absorber exclusive for a trumpet muffler of the same company. It is hard to twist, although attachment is easy as the description. It cannot muffle, although the glass wool attached at first was also wrapped, a sound volume is large. Since I cannot run, I bought a glass wool of the other company. View detail
It is used in CRF450. Using a pure Silencer, it is a little small. The same thing is sold from FMF. This one is larger. Since the hour of use is still short, durability is unknown.
It is used in CRF450. Using a pure Silencer, it is a little small. The same thing is sold from FMF. This one is larger. Since the hour of use is still short, durability is unknown. View detail
It is used for the silencer of the delta of WR250X. Although a hand riveter etc. are needed for attachment, it is fairly easy work! steel wool is also contained in the silencer of a delta inside glass wool, and it also removed and exchanged them -
It is used for the silencer of the delta of WR250X.
Although a hand riveter etc. are needed for attachment,
it is fairly easy work! steel wool is also contained in the silencer of a delta inside glass wool, and it also removed and exchanged them --- which did not change sound volume so much even if exchanged for the glass wool of this kijima at the sake -- this is the selection mistake of my goods.
However, I think that it is the merit of goods that it can hold down to the sound volume of the same level only by glass wool.
The engine performance of goods is a cinch.
They are four stars!
View detail