Reviews
Easy to use
I bought this for my Karker Silencer-less Toa. It may be a little short for the Karker k2Silencer. It is easy to wrap and doesn't sting as much as I thought it would. Easy to use. Needle Gold was also included. View detail
Muffling effect Large
It's very quiet.
When I disassembled the Mahura, I found that most of the holes of Punching metal were hardened by oil. This could have caused the sound to reverberate instead of being muffled by the straight tube. I removed the oil and wrapped Wool around it and put it back together.
After the replacement, there is no echo of the exhaust sound, and the sound became low and a little less loud. It is a little, but it is a sound like a practical car. If you raise the rpm, there is a sense of excitement with acceleration as expected.
View detail
Fits: HARLEY-DAVIDSON Universal
To SilencerOH.
[How is it used?
I ride a YZ250 for Enduro fun.
I bought this one because it's been making a lot of noise lately and I wanted to OH it.
I think it's good manners to be as quiet as possible considering the recent Course environment. Also, the Torque will return.
How was your experience with it?
It will be one of the most annoying work, but it is a Recommendation work for those who play with Enduro because the Torque will be increased when rewinding.
How did it compare to other products?
It was in stock and arrived quickly.
Some people roll residential ones, but I recommend this one because it's half the volume.
[Points to note]
Because the silencer of YZ250 is elliptical, it is necessary to wrap the Glass Wool to the elliptical well.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
You should buy Wire for Grip because you put it together with Wire.
https://www.webike.net/sd/23616697/
View detail
It's easy as it is.
Recently, the sound has become loud and dirty, so I replaced it
I have run about 17000km from the new Exhaust System.
When I opened it up, there was only about 1/3 of the Glass Wool left.
The replacement is Glass Wool as it is in the form of Exhaust System.
It's easy to do, just pull the old one out and put the new one on.
After the replacement, Idling doesn't feel much of a change in sound, but
The sound when accelerating has become quiet and has a nice huggable sound.
I think this is a part that needs to be replaced periodically.
View detail
Not as durable as I thought it would be.
Used in Silencer, an Other Brand Product.
It's a personal subjective view, but it gets torn apart rather quickly.
The Punching of Silencer was clogged in the part where it was not wound.
Probably the keba on the surface has been burned off and peeled off.
As for muffling, you can adjust it by the amount and area of the roll, if you're willing to go through the trouble.
Rose, wind up, run and check the volume repeatedly.
In the meantime, I was able to get rid of the uncomfortable muffled sound in Silencer with the perfect amount and roll.
If you want, Material.:I would like the Stainless Steel needle Gold to be longer.
View detail
Does it work somewhat?
When I tried to use an external exhaust system, I bought it to counteract the unexpected noise. I thought it became a little small, but it didn't run at all unless I wound it up well. I put it back on several times and it settled down in its own way. View detail
Buy on RSVfor Silencer
I bought it for my RMX250S RSVfor Silencer.
This one product was the perfect size for Silencer.
It's nice and easy to handle and comes with a winding needle Gold, which is a great help.
View detail
It's much quieter.
The new exhaust system was noisier than I expected, so I wrapped the Baffle with Glass Wool, and after installing Glass Wool, the sound became much quieter, so I am satisfied. View detail
Well, that's about it.
I used it to replace Silencer's Glass Wool.
This item comes with Glass Wool and Steel Wool so it can be rolled in layers.
But because I put it on the Smallish Exhaust System, it was quite crispy.
It's like I was forced to push it in.
The volume felt spread out and cohesive.
It's a consumable product and needs to be replaced regularly.
View detail
I'm trying..
If the Silencer of the external Chamber of STREET MAGIC110 deteriorates over time I've been using Glass Wool, but this time I'm going to try out Stainless Wool I wrapped it around the inside of the Glass Wool The sound quality is not annoying The sound quality is a bit bass-heavy but not annoying View detail
Easy to use
I wrapped it around the external exhaust system when I replaced the Baffle
The volume is well controlled, but the rest is durability
The Stainless Steel Wire is also included and is very useful
View detail
Easily select your size
There are several sizes available, so you can choose the one that suits your silencer It is easy to process
It is said that it is hard to scatter Wool because of the ceramic coating, but if you can, you can use it as a I think it's better to wrap the stainless wool around it:It would be nice to have a Set product
View detail
Easy to use
YOSHIMURA's exhaust system has deteriorated and the sound became large Replacement
The ban on going out of the house was lifted due to the New Model Corona virus infection is fun!
View detail
I'm not sure if it's hard to wrap it up …
Purchased to replace the sound deadening material of Silencer by Toshi TEC
Toshi TECSilencer has a dual structure
Punching pipe is wrapped with Stainless Wool, and then Glass Wool is wrapped with Roll
Stainless wool becomes thinner when it is spread out
It's difficult because it's the first time I've wrapped sound deadening material, so I just don't have any experience with how much to wrap it
Material was a good product
View detail
It's hard to wrap it up!
Purchased to replace the sound deadening material of Silencer by Toshi TEC
Stainless wool and Glass Wool, as the inside of the Silencer was double-layered I wrapped the
The Glass Wool was very soft and thick but easy to cut
But if you touch it too much, the Glass Wool will come loose and spread, so you have to decide and roll it up at once
I wore Vinyl gloves when I worked on it, so it didn't sting
When you work, you might want to do a Mask and try not to smoke Glass Wool
After the work, the cut fine glass wool will stick to your clothes and fall to the floor, so you can mask it and clean carefully
View detail
Is the durability good?
I used it for WR SilencerOH used in Race. It is the second Repeat.
Although there are people who substitute Stain Wool such as 100, it is recommended that you purchase exclusive items as well.
Heat resistance is different and it is easy to wind without gaps. Especially OUTEX 's Stain Wool is wrapped like a gumte, so it is easy to wind up pulling. Although I took Wool for the last round this time, it seemed to be used still more! Although Glass Wool was scorching, it never faded away and the function of Stain Wool was played well!
We recommend outdoor, gloves, Mask as fine scraps come out when winding.
And if the price is a bit cheaper ? ? ? I think.
View detail
It became a good sound.
Before attaching it, it was a shrill sound, but after the installation it became a bass and it became a good sound. It is a length that can be used twice with one piece. View detail
It is a good deal.
I used it for the Glass Wool exchange of the Exhaust System of LIBRA ☆ PROExhaust Chamber used for NSR 50.
Until now DAYTONA's 250 x 700 Size is Quantity : 1pc. Although it was using, Glass Wool is thicker than it, Cut 250 x 500 to half, and it becomes sufficient amount at 250 x 250.
The fiber of Seat is also solid, and even if you are working with bare hands it will not be scratchy, but as there is thickness, the return when winding is strong, it is a bit of a hassle to wrap tightly.
I reused the Stainless Steel Wire that I removed from my old Glass Wool, but I think if you can come with a Wire if possible.
View detail
4.0
When I changed Shaffle's Baffle, I used this product because it was an explosion. The effect was absolutely Large, and it turned into an elegant sound quality. If the attached needle gold is a little longer it is none to say. View detail
The dimensions are Exactly
MC18 / It fits Exactly to Silencer's Length of Dog Fire Exhaust Chamber of NSR 250R. Is it the effect of Steel wool? The sound felt dry. It is very nice there is no waste. I used Aluminum Tape without dare to use the included Stainless Steel Wire because I did not want to wear it tightly due to muffling effect for fixing. View detail