Reviews
Fender Eliminator
Since there is no Reflector in the Fender Eliminator
I'm using it by attaching it to the bottom of Active's License Plate Base.
View detail
Reflector kit
I used it on my GROM Fender Eliminator. View detail
Fits: Others Medium size car and over (126cc-)
make an attractive appearance
I bought this with the introduction of Fender Eliminator.
If you use the Fender Eliminator, you can see the Reverse side of the Number.
If you use this, you can kill two birds with one stone because it looks much better and it has Reflector.
Material is not resin, but Material:It is aluminum and has a little weight to it.
The Fit feeling is also good and I recommend it.
View detail
Exactly
I replaced the Tail lamp with DRC's Mo Tread edgeTail and installed it together.
Installation is easy
The size is small, so the Tape area was refreshing.
View detail
Good quality
This is Second time to buy it. The first time I bought a big one to my Msx125, now since nsr80 is a small car so I buy it and fit it with the small number board. The quality is still good and the size is very good as I want. I am so happy to get it. View detail
Design is good.
Since I installed Active's Fender Eliminator Kit, I also installed Reflector.
It has to be made by Active.
I decided to go with this one, which is slim and has a nice style that other manufacturers don't have.
Once I put it on, I don't feel like putting on another company's.
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI W3/650RS, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Perfect for USDMSpec.!
I bought this to make it USDM style?
Parenthesis is better?
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI W3/650RS, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX
Perfect for USDMSpec.!
I bought this to give my Scooter a USDM look.
Parenthesis is better?
View detail
Slim reflector with safety-standard spec.
What made you decide to buy?
Active's Fender Eliminator Kit does not come with a Reflector (Reflector); without a Reflector (Reflector), you cannot drive on public roads, so it had to be purchased separately.
How was your experience with it?
The Active reflector kit is designed for the Active Fender Eliminator Kit with the license plate angle of 45° to vertical. The Active reflector kit is designed to reflect the license plate of the Active Fender Eliminator Kit at an angle of 45° to the vertical plane. when the Active reflector kit is used with an OEM Fender or other manufacturer's Fender Eliminator Kit, the reflector angle may not match and the reflector may not reflect properly. In this case, you cannot drive on public roads due to poor reflection.
[Regarding installation]
Anti-vibration material is attached to SlimReflector Bracket. This is to reduce the vibration with the Number or NumberCover while driving. Unexpectedly, vibration is transmitted to the rear, and unpleasant vibration sound can be heard even through the helmet. When I installed the Fender Eliminator and Reflector, I was wondering where the noise was coming from, but it was dark under the lamp. It was caused by the contact and vibration by NumberCover and Reflector. Just to be sure, ZX-6R as well as GROM, measures are taken, but the anti-vibration material Because it is not attached, separately, it is necessary to prepare. When you buy it, you can get it at the nearby home center.
View detail
Don't forget about the Fender Eliminator!
I bought it later when I noticed that the Fender Eliminator Kit I used didn't have a Reflector.
It's just a small measure under the Number, so you can keep it from getting in the way of Style as much as possible.
Reflector is included in the safety standard to pass the vehicle inspection, so if you don't wear it, you may fall prey to White bikes due to poor maintenance.
It can be installed in less than 5 minutes.
View detail
Used with Fender Eliminated KSR80
I bought this product because the KSR80 I bought used was Fender Eliminator, but it did not have Reflector.
You can install it between the License Plate and the Bracket without any problem even if you are a beginner.
The price is right for Universal and the quality is a bargain.
View detail
perfectly
Installed on 250SB.
I have no problem with it.
View detail
Used for GSX-R125Fender Eliminator conversion
When I converted my GSX-R125 to the Fender Eliminator, I installed the slim shape and reasonable price here.
Fender Eliminator Kit made by R&G, Reflector made by Active, and Rear is Refreshing.
The visibility from the following vehicle by the reflection is perfect, and it can be used with confidence because it satisfies the necessary regulations of Fender Eliminator.
View detail
Designability that no other company can offer.
The only manufacturer that cares about the Reflector is Active.
Slim and Fit Design is great.
Every time I see it from Rear, I get more satisfied.
View detail
I've got a NumberCover installed.
I've got an A-Tech NumberCover installed.
I've been thinking about getting an extra Reflector.
As you can see in the picture, just fit the Number and the Space under the A-Tech Sticker!
The Balance looks great and I love it.
View detail
Fits: Others Medium size car and over (126cc-)
Number base、Reflector
Size is perfect, no problem at all! View detail
It is durable.
It is a recommendation because it is a reliable manufacturer, durable and cheap. View detail
Cheap.
Easy to install on both sides. View detail
Thank you for the quick delivery.
I haven't installed it yet, but I'm happy that it's delivered safely. I'd like to leave anywhere if I could imagine a w800 that would fit well. If the delivery is a little late because the webike is out of stock, the delivery will not be too late! View detail
Design is a good idea (depending on the type of car and the direction you are going).
The size is the same as the image.
The mounting is done by friend-tightening the NumberMounting Bolt. In some cases, it may be better to increase the bolt length by 0.5mm.
I love the fact that it is legal without interfering with the Image that I want to lighten the Rear under Number and without being too assertive.
View detail