Reviews
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Small Fashion (*^^*)
I bought this to cover the MirrorMounting Bolt hole. I bought Black to match the color of the bar and it looks discreet and prevents Garbage from entering! (^^) View detail
It's also made of steel rather than rubber mirror caps.
I bought this because I needed a mirror cap after attaching the bar end mirror. Since it is a general-purpose 10M type, there was no difficulty in attaching it. A slightly longer flat-blade screwdriver or coin just needed for attachment will suffice. View detail
สินค้าสมบูรณ์ สวยงาม ไม่มีตำหนิ จัดส่งรวดเร็ว View detail
Fits: KAWASAKI Ninja400, KAWASAKI NinjaZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Good texture. Sober but elaborate construction, unobtrusive in a good way.
I've decided to remove the Mirror as I have more opportunities to run on Circuit.
I've been looking for a Can Seraar because my aesthetic sense won't allow me to just remove it.
I've seen other Manufacturers with less than stellar reputations and flashy, expensive products.
intermediate between the two. (?) I decided to go with this one.
As a side note, this is my first MORIWAKI product.
I don't have much luck with KAWASAKI.
The black anodized glossy finish is a great way to hold down the claims of the Parts.
The logo is properly included in the proportion of the three, and it also has some three-dimensional modeling.
It is an elaborate construction and I am personally very satisfied with it.
The reaction makes Bolt's head stand out.
So, I made the Plate about 1mm thicker and the outline about 1mm larger.
If you make the Bolt a plate Bolt and make the Plate surface flat, you get 100 points.
The price seems rather high, but it can't be helped.
It's not like it's going to break, it's not going to sell in quantity, and it's going to cost a lot of money to build ... .
It is much cheaper than One-off production.
View detail
protection
This product is used to protect and prevent Rust on the fixed part of the Mirror.
It would have been JUST a little bit smaller, but I thought it was okay because it was protective.
View detail
Larger than expected.
I bought this to install my AZ Mirror on my BirdCity, which I used to use on my old single car!
I didn't actually use BirdCity's OEMRubber because it worked just fine!
Now in stock at the PartsSmall store!
I think the quality etc. is fine.
View detail
It is only for CBR25RR, so it is fixed firmly and the design is good!
[How is it used?
This is for fixing the cowl when the Mirror is removed during Circuit driving.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Installation is easy
However, the hexagonal size of the Hexagon Socket and Bolt of Mirror attached to the car body is 5mm, but the hexagonal size of the Hexagon Socket and Bolt for fixing Mirror Canceller is 4mm, so I have to carry two different size tools. I have to carry two different size tools.
How was your experience with it?
I am very happy with the design and the installation.
[Included Parts:were they on?
The product consists of a Mirror CancellerPlate and a Hexagon Socket and Bolt for fixing the Mirror CancellerPlate, but there is a Vinyl type attached to the screw to prevent the Hexagon Socket and Bolt from coming off the Plate. By attaching the Vinyl type to the Bolt part of the Hexagon Socket Bolt that holds the Mirror in place, you can prevent the Bolt from being lost when the Mirror is removed.
[Was there anything that disappointed you?
The size of Hexagon Socket and Bolt for fixing Mirror Canceller was 4mm.
I wish it was the same as the size 5mm of Hexagon Socket and Bolt for MirrorBody.
View detail
Fits: DUCATI PANIGALE 1199 R, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299
That's the exclusive product
When the Cowl mirror is moved, it is the Plate which blocks the NORMAL installation hole. Well, if it is said that this price is cheap with mere Aluminum Plate, it is not cheap. However, if it is thought that it makes by oneself, after all it is a thankful commodity. Because it is a special product, the screw hole position etc. with OEMBase plate is almost no problem. Although the texture falls a little when compared with DucatiPerformance of the ridiculously high OEM, because there is only Red alumiteSpec. here, I think that it is good for the person who does not want to make it conspicuous by making Cowl the same color as possible. View detail
Preparation for Bar end mirror
Purchased on the recommendation of others.
I'm considering repainting it in OEM colors because the shape is good, but the color doesn't match slightly.
View detail
If you're a Puig fan...
At any rate, it depends on how you use it.
I think it is cool and well made if it is a Mirror Cap for Circuit driving.
The way I use it, it doesn't fit Cowl perfectly, so there's a bit of a concern.
The product itself is Parenthesis good and Material is also good.
But I wonder if this is necessary for the intended use.
View detail
Very good
Fit for Beauty. Bolt stop from the back. View detail
A must-have for circuit driving
This cover is used when the OEM Mirror is removed during Circuit driving.
I'm sure the aerodynamic drag will be reduced and the time will be reduced by Comma 0.0. lol
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA250R, KAWASAKI Ninja 650, KAWASAKI ZX-25R
It cannot be installed
Unfortunately, I couldn't install it on my Ninja ZX25R because the position of the bolt hole is gap. Just in case Mine. He added.
Once I had a replacement that was inspected and confirmed by the Manufacturer under the fitment warranty, unfortunately there was a gap in the Bolt hole and the Bolt bit the hole in the Mirahole Cover and could not be tightened to the end.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel 1100, HONDA Rebel1100 DCT
Mirror to fill the mounting holes!
The material is Aluminum Cut-out/AnodizedSpec. so it looks perfect. It is not a functionally different part, but it makes the area around the Handlebar more gorgeous. Please note that the material is Aluminum Cut-out, so please be careful about the tightening torque. It is a hexagonal spec. so it will be licked easily. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel 1100, HONDA Rebel1100 DCT
Was good
It's just as I imagined and I'm glad it's a PetitDress-up! View detail
Very good
Looks Refreshing . I like the fact that there is no Bolt on the surface. View detail
Very good.
I think the texture and fitting are both good. View detail
Very good.
I think the texture and fitting are both good. View detail
หากต้องการความสวยงาม สิ่งนี้ จะทำให้หัวน็อตกระจก ดูโดดเด่นยิ่งขึ้น View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
Small processing required
The bolt is M4×25, but it's 2~3mm longer than the original one.
It looks like you need to cut and use, etc.
View detail