Reviews
With Sprocket exchange
Rear sprocket I bought it along with the exchange.
Since Bolt & Nut attached to purchased Sprocket was able to be used, this is unused but I think that it is a good good item for Cost performance.
You can also use it with other models.
View detail
It is Fu Two.
Honda's OEM Parts Number Because ordering is troublesome, I replaced it with kore.
Material is so soft as Aluminum casting.
I had to scare it when it was not working carefully.
It works well if attached, but is not suitable for frequent removal.
View detail
Light weight & Dress-up!
CB1300SB I used it for RearSprocket installation of MODEL 2014.
Normal nut has a two-sided width of 19 mm, Titanium nut is 17 mm.
Screw diameter is the same so you can use it as it is.
Moreover, because it is in loose dowel Nut shape, I thought that it was hard to loosen but for the sake of just making it, I applied a very small amount of Screw stopper.
NutQuantity : 5pcs. In total, the weight has been reduced to 55 g.
View detail
Cheaper than OEM Parts Number
【What made you decide the purchase?】 I used it even before cheaper than OEM Product. Bolt, Nut, Washer is doing Set and Nut is Self Locking Nut and there is no need to use Screw lock agent.
【How was it actually used?】 You can install anything without problems. Besides this time's Wheel, using it for about 2 years with durability and corrosion resistance has not caused any problems at all. I do not know yet more durability.
【Was it difficult to install? (Hard parts case)】 Easy 6 mm Hexa and 12 mm should preferably have StraightGlasses or longer Combination
【Please tell me the point of installation and hang (in the case of Hard parts)】 Tightening Torque is firmly. Spoke gets in the way and all the Nuts can not be locked in Torque wrench, but I remember the tightening and leaving the other Nuts with the same Torque. I think there is a problem with tightening Torque shortage, but I think that a little overtorque is problematic.
[Is there anything I was disappointed about?] It was an unchanging product as I have purchased it before.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I wonder if the finish is beautiful a little more Plating
【Have you compared items?】 OEM Product, BOLT Shoulder Bag, ZETA
[Others] Finishing is a price, but it is a firm product. Since it is Self Locking Nut, it is exchanged for new items each time Sprocket is exchanged.
View detail
It is cheaper than OEM and satisfactory product
I purchased it simultaneously with RSprocket of DRC.
Nut was properly Lock nut, it was a cheap and satisfying item than OEM.
I do not know the durability yet, but I think that it can be used without problems.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000 GP, KAWASAKI Z1000J, KAWASAKI Z1000, KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1100 (KZ), HONDA CB900F, HONDA CB750, HONDA CB1100F, KAWASAKI Z1000R, KAWASAKI Z1000 GP, KAWASAKI Z1000J, KAWASAKI Z1000, KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1100 (KZ), HONDA CB900F
It was a diversion purpose - - -
Stud boltSpec by hub deviation by diverting other model Wheel. I bought it for stopping Bolt from.
I was looking for a half Screw-like thing so I thought that it would be effective but changed the width of the Sprocket
A little time (It is SUNSTARSprocket) I could not divert it.
Since it thinks that there is an escape in the original Screw hole, if it is a hub which does not hack up, if this BoltSpec. It may be possible to change.
Since it is a purchase for diversion purposes from the beginning, it may not be an imp
I think that the accuracy of Bolt itself is correct.
View detail
The texture is not that good
Purchased for DRC Sprocket installation.
It's inexpensive and it will become soiled by anything, so it does not matter if you care about its appearance.
I do not understand Material well well, but be careful not to make it rust.
View detail
Weight saving
Since Caliper Mount Bolt was made to 64Titanium, Sprocket nut also continued to exchange for the purpose of weight reduction and corrosion countermeasure. It was expensive but I am satisfied.. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Purchased slightly cheaper than OEM Product
Since 1 pc of current Nut was ordinary Nut, it was purchased at Set this time, although it was originally OEM purchase schedule, since Posh was slightly cheaper than the estimated price of OEM, it looks like OEM looks like product as a product I do not think View detail
Sprocket exchange
Since it is necessary for Sprocket exchange of DRC, I bought it with Sprocket at the same time.
The required number is 4, but since this product is Pack of 06 Rin Quantity : 2 pc over. I think that it was still better if 4 lines were lineuped.
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA MONKEY [MONKEY].
One point ♪
I bought it to match the color of Chain and Sprocket.
I like it myself ♪
The object itself is lighter than the OEM.
I would like to see how long we will be durable.
View detail
PMC 10mm Driven Sprocket Nut
Because it is Uniqlo plating, it becomes a little white like shine than normal Plating.
I bought without looking at the item description well, but as I imagined normal Chromium Plating, I was a bit disappointed.
Because it is a commodity of PMC, I think whether there is a problem with the product.
View detail
We do not compare the total weight with net STD NutWasher
OEM's Nut size Socket is 17 mm
TitaniumNut size is 14 mm.
We do not compare the total weight, but in Gram units
I think that it will be light weight.
Steel nut will surely get dizzy
With Titanium nut this shine, shine
Yes..
View detail
DRC Sprocket Bolt/Nut
I purchased at the same time as it is necessary for Dura Sprocket installation.
I think that it is necessary and sufficient strength and construction, but whether the accuracy is low or the movement that the hexagonal hole is slightly transformed - - -
View detail
easy to handle
Originally, I bought it by mistake, but ...
Sprocket boltNut of CRF 250L is M10, so it is natural, but as the diameter is different, a gap is formed and the Sprocket moves.
Spacer which fills this gap at another site was sold, so I use it in combination with it.
So ... Sprocket boltNutM.
The serviceability is Up even if I say anything. By the way, I believe it is lighter than OEMBolt nut, so Petit is weight saving
View detail
Great
I only forgot it because I forgot to take a picture
This Bolt / I think Nut is wonderful.
It is recommended!
Nut must be locking prevention.
Bolt's Length is the best.
It is not too long, not too short, it's an ideal length!
Perhaps it was perfect as it was combined with DRC's Sprocket,
Although a certain Manufacturer's Sprocket comes with a dedicated Bolt
Bolt is long. I was slightly disappointed..
When exchanging other Machine Sprocket, this Bolt / I will change to Nut.
Based on my experiences, this one definitely has good serviceability w
View detail
Price difference with OEMBolt is obvious
OEMBolt is 1 pc / Considering about 200 yen, the price difference is clear. I changed it cheaper if I was in Sale. I think that it is best if there is also 10 mm diameter Bolt if possible.
ME06's hub is 10mmBolt so I used OEMBolt this time ...
View detail
Fits: HONDA CB350, HONDA CB400 Fore (air-cooled)
Instead of OEM
As I ordered the OEM Product, the delivery was long, so the same etc. I made this item of goods.
However, it is regrettable that the delivery time at the time of estimation was different from the actual delivery date and it was not different from OEM Product.
View detail
Quantity : This price with 1 Set of 3-items !!
【What made you decide the purchase?】 Bolt - NutWasher is attached to each 6 each and this price is attractive
【How was it actually used?】 I purchased it because it is necessary for installing Sprocket of DRC but it is not possible and it is impossible
【Was it difficult to install? (Hard parts case)】 Any item
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
[Is there anything I was disappointed about?] Since the price is expensive, it can not be helped but it looks cheap
【Hope for Manufacturer - Please let me know if there are any improvement points】 DRC's are inexpensive and many good ones so I want you to continue making good ones
【Have you compared items?】 nothing special
[Others] Any item
View detail
Attached to HUSQVARNATE 510
HUSQVARNA(SMSpec. ) Purchased to attach Sprocket.
Because the price is also cheap and has become a reliable Brand
That's alright..
HUSQVARNA sometimes screws here loosen easily and sometimes come off (once disaster catastrophic... ) So let's check firmly!
View detail