Reviews
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE
I don't know who to complain to!
Only one point of dissatisfaction.
I've got a bad one - I've got a bad one.
(o^^o)
View detail
Fitting is also good
I used to install the Blinker using the hole in the Seat Bracket for Side Cover because I use Posh's Blinker kit, but I chose this product because it was a type that can be installed on the Side Cover. The Blinker can be re-installed in the same position. The footing is better than the OEM Seat and it does not slip anymore. View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARestore
I bought it used and the OEM Parts were badly rusted, so I replaced them with new ones to prevent rust. It looks good. View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
With this 4, I can also think of bean paste as a sweaty person!
[How is it used?
I have bought and installed it before, and mine is an indispensable Cover!
Was the one you received as per Image?
Yes, it was exactly as shown on the Image.
It's easy to use, no heat, no shift.
How was your experience with it?
I installed it and ran it immediately.
I was afraid that the seat height would be raised since it is to be placed over the normal seat, but I had no problem.
[Points to note]
The size is a little bit limited, or rather Exactly, so I added it while pulling it out.
No movement after installation (no Gap), no problems, and I'm sober.
How did it compare to other products?
I bought only this product without comparing other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA XT250X
The price is cheap and easy to put up.
[How is it used?
I was looking for a for re-covering skin for my SEROW250 Seat Cover, which I bought used for playing in the mountains, because it had become hard and slippery due to age-related deterioration.
I was searching Webike because I don't want to use expensive Seat fabric since I fall down every time I go out to play in the mountains, and I found a lineup of Seat fabric for SEROW250 at NTB, which sells various compatible products at low prices.
2,482 yen at time of purchase (tax included) I ordered it thinking that at this price I would be able to give up if I went out to play in the mountains and was unlucky enough to tear the Seat after a few falls.
How did you like it?
The product we received was a little thinner than the Yamaha OEM, but the fabric was thick enough. The triangular-shaped front part of the seat was sewn three-dimensionally, and the quality of the product was very good.
Remove the OEM Seat Cover, place the NTB Seat Fabric on the Seat Base, wrinkle it lightly, and secure it with a Tucker. (If you have experience with Seat reupholstery) Seat can be reupholstered in Beauty with relative ease.
It is not an OEM fabric crimp type but a sewing type fabric, Seat reupholstered." It has so much QUALITY that you would not even notice it if you did not say so.
It also seems to be durable, so as long as it is not cut by excessive protrusions or blades, it will be as durable as OEM.
Because the fabric is newer, it is naturally more flexible and less slippery while riding. If you are not sure which one to choose when reupholstering your seat, NTB is a good candidate. Normal Fit to
How did it compare to other products?
SEROW was a popular vehicle and several companies had Seat Covers on the market, but NTB's low price was overwhelmingly competitive.
Universal Product. However, it would be difficult for other manufacturers to sell a 3D sewn product for SEROW250 at this price.
[Points to note]
Since the product is three-dimensionally sewn for the car model, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, and that is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
As I wrote above in a scattered manner, the shape is three-dimensionally sewn for SEROW250.
On top of that, the price is low.
[How is it used?
I use it in all kinds of situations, from riding around town to playing in the mountains to touring.
Seat grip is good and very comfortable.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
No Tandem belt (because the OEM SEROW does not have Belt) 。
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
It is a very good Seat fabric and I hope to use it again next time.
If possible, even if the price is a little higher, it would be more attractive if the seat surface is black and the SIDE is silver.
View detail
Fits: KAWASAKI KSR-1, KAWASAKI KSR-2
Securely sewn even for small motorcycles
[How is it used?
I got a used spare Seat for a KSR-II that I have owned for many years, but I was looking for a replacement fabric because the Seat Cover had cracks, probably due to poor storage conditions.
I was unable to find Seat fabric in the same color scheme as the last model, so I searched Webike and found it for sale at GRONDEMENT, so I purchased it.
How did you like it?
It is probably a higher quality fabric than OEM Product.
Color as a seat:Gray outer skin part is Dimple processed and gripped firmlyQuantity:Seat fabric is very easy to stretch, not a flimsy article of 1pc. fabric, but firmly Draping in front and back.
The price at the time of purchase was 6,820 yen, which was relatively expensive compared to NTB's Seat for SEROW250. Convincing Prices or perhaps I should say This is a low price for this quality." The product was so good that we could feel that it was a good product.
The fabric is thicker yet softer and may be more durable than the OEM Seat Cover.
How did it compare to other products?
To be honest, the only other product on the lineup other than GRONDEMENT's was a black fabric surface, and at this point, GRONDEMENT was the only choice for me.
[Points to note]
Since this product is three-dimensionally sewn for KSR, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, which is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
The shape is three-dimensionally sewn for KSR and the color scheme Pattern is the same as the final KSR-II model.
The price is never too high. High The price is exquisite, which cannot be said to be the case.
[How is it used?
The city driving is Main, but it has almost become Display these days as it is getting old and is stored in a Large cutout.
I would like to own it as long as possible.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Please continue Lineup as long as GRONDEMENT continues.
View detail
Fits: HONDA XLX250, HONDA XR200, HONDA XR250, KAWASAKI KL250, KAWASAKI KLX150, SUZUKI DF200, SUZUKI SX200, SCORPA T-RIDE 250F, HONDA CRF150R, HONDA CRM250AR, HONDA CRM250R, HONDA FMX650, HONDA SL230, HONDA XR250 BAJA, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230, KAWASAKI KL250, KAWASAKI D Tracker, HONDA XR250
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
Grip is amazingly durable!
[How is it used?
This product was stuck on an XR250 Seat that was purchased used by a person at work about 15 years ago from the beginning.
The vehicle had been restored to the best of my ability at that time because the exterior of the vehicle was damaged except for the Seat, and after many years it came to me a few years ago.
The exterior of the car was damaged by ultraviolet rays, and the tires were badly cracked and the brakes were sticking to the car.
Sorry for the long preamble, but even in such a state of exterior rustling, only Seat remained flexible.
The surface had lost its Luster due to water stains and dust, but after washing the car and applying a protective material, it returned to the condition it was in 15 years ago.
It is indeed a product sold by Webike for 10,560 yen, and is definitely more durable than the OEM Seat Cover.
How was your experience with it?
When the car came into my possession, I again did Restore maintenance on each part of the car, but I drove it for a while without reupholstering the Seat (I eventually replaced the Seat Cover with another Manufacture's one to match the repainted exterior).
GripperMaterial that "Demonstrate Exceptional Flexibility and Grip Power" as the manufacturer's slogan says, is used throughout.
Assist Rider's Machine Control. The flexibility and gripping power did not deteriorate even when exposed to ultraviolet rays, rain, wind and dust.
How did it compare to other products?
As I mentioned above, I had replaced it with a Dimple-finished Seat Cover made by another company, but the Seat Cover remained as flexible as a new Seat surface after more than 15 years. I think it is phenomenally Tough.
[Points to note]
Not so much as a warning, but the moat on the Seat Cover named GripperMaterial was deep, and if the Seat was bathed in mud, the dirt would get into the deep moat and be difficult to remove.
The product is three-dimensionally sewn for XR250 (MD30), so it is relatively easy to work with if you have experience in Seat reupholstery in the past.
Other items that would be helpful
The deciding factor in the purchase
As I mentioned at the beginning, it was already stretched at the time of purchase on a used car.
[How is it used?
Basically, it is a city Main, and I am fully aware that it is a high-performance Motorcycle for a 4StDual PurPass car at that time, but I could not handle it because my feet could not reach the ground on rough terrain, and I lacked the skills.
【Included Parts:presence or absence】.
Quantity of 1 Seat Cover and Instruction Manual on how to apply.:Set
I don't think there was a tandem belt attached.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
The fabric joints are crimp type like OEM, so there is no slippage, I think Coking agent is not necessary.
Opinions and requests to Manufacturer.
An indispensable manufacturer in the off-road motorcycle world.
We look forward to your continued development of a wide variety of lineups.
View detail
Improved ride comfort without sacrificing style
The reason why I bought this seat is because I like the Normal seat for design, but it hurts my buttocks when touring.
The tandem seat is too narrow and the large seatback is not stable, and the tandem can only be used for short distances.
The seat is 4 cm higher, so the footing is worse, but the cushion is thicker and the ride is more comfortable,
Tandem performance was also improved, and I had no complaints even after running about 120 km on the tandem.
Since it is an OEMOption "Pon attachment" Therefore, we only need to replace it.
I was not sure about the price and the Normal seat since it is available, but I am happy with the replacement.
ESTRELLA itself is no longer in production, so those who are considering it will recommend replacement before it is discontinued.
View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225
The fabric is slightly thicker than the company's SY-107Type.
[How is it used?
We decided to reupholster the seat of a 1997 SEROW225 WE that we acquired two years ago. The seat had originally deteriorated, but due to playing in the mountains, etc., the surface skin had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time in Webike's product introduction section. "High quality" It was described as (Price at time of purchase:3,150 yen) This will be a review of Seat fabrics in the "Seat fabrics" section.
How did you like it?
As I said above. SY-107V (High Quality Type) When SY-107. (Standard Type) The Standard Type was actually used for the Seat reupholstery work, as we purchased the Seat fabric at the same time as the Standard Type.
If I write honestly. If you weren't told, you couldn't tell them apart just by looking at them." and if you touch it, you'll find that the high quality Type is more like A little thicker?" It was like
Well, the price of Standard Type is 2,830 yen and High Quality Type is 3,150 yen, and the difference is only 320 yen.
When it was listed in the introduction section. The higher one is shiny. The cheaper one is WITHOUT Gloss. However, the actual product arrived in a semi-glossy condition, and although it is hard to tell the difference just by looking at the product, the thickness of the fabric is enough to make the product look like a "good" product. High-Quality Type may last a little longer.
I would like to replace the surface skin of my current Standard Type with this product when it becomes useless.
How did it compare to other products?
Compared to the Standard Type SY107, which I purchased at the same time, if there is a price difference of 320 yen, would it be better to purchase this product, SY107V?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but you can still purchase it at Seat CoverSingle Item! (17,380 yen) 。
Even though the fabric is a little thicker than the Standard Type, it is not as good as YamahaOEM's Seat fabric, but considering the price, I think this product is well worth purchasing.
[Points to note]
When reupholstering, if the Tucker is driven in halfway, there is a risk that the fabric will break from there.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Seat fabric from Universal Product was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:1 pc. only, this one also did not have Tandem belt, 1995 (4JG2) From SEROW225 W onward, Tandem belt is not included even in OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
I honestly think it would be better to use this product as a 1 pc system. I would like to continue to use Lineup, but I am thankful that I have a choice.
View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARefresh
Replaced by KATANARestore, no problem with OEM parts shape. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
What an amazing experience for my first Webike purchase.
Fast shipping Genuine Kawasaki Part (rear seat cowl) KRT edition Amazing experience overall Thanks Webike! I'll definitely be a repeat customer View detail
Anyway, it's expensive!
[Personal Thoughts
Good impression
Looks great! It also improves the footing somewhat!
Bad impression
It is shaped to prevent the body from falling backward for the Drag race, but it seems to be effective only when the body is bent over in a forward leaning posture. If you sit on it normally, you might slide backward. I thought it should have more angle.
Seat is much harder than NORMAL.
The fabric makes the seat slippery and my butt slides around.
Bracket needs to be adjusted because the mounting bolt does not fit easily.
The back of the Seat is very poorly made. There are many scratches on the back of the Seat, which are caused by cutting the excess fabric with a cutter. (Lol) SeatSome stains are stuck in the gaps between the seams that can't be removed.
Na! Ni! Yo! Ri! … It's crazy expensive!
With an outside Seat, you can buy two.
I would have preferred to buy an OEMColored Seat?
View detail
It's just plain cool.
I never tandem on my RR-R so I took the plunge and changed it. being OEM and durable, I had no problem putting a Seat bag on it. It's just plain cool. View detail
Cheap, thin, but usable.
[How is it used?
This 1997 SEROW225WE, which I acquired two years ago, was purchased by an acquaintance of mine six years ago, and I had done a fair amount of repair work on it when I bought it six years ago.
After receiving it the year before last, we prioritized restoration from a functional point of view, but the Seat Cover, which was originally on the verge of unraveling because it had been used for playing in the mountains during that time, had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time The cheapest one (price at time of purchase:2,830 yen) Review of.
How was your experience with it?
When it was listed in the product section. The higher one is shiny. The cheaper one is WITHOUT Gloss. The actual product that arrived was semi-glossy and I could not tell the difference just by looking at them. When I touched them, I found that the more expensive one (SY107V) had slightly thicker fabric and seemed to last longer than the less expensive one (SY107).
How did it compare to other products?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but is still available in the Seat CoverSingle Item (17,380 yen).
As expected, the fabric is thinner and less durable than YamahaOEM's Seat fabric, but at this price, it makes enough sense.
[Points to note]
As mentioned above, the Seat fabric is thin, so if the Tucker is driven in halfway during reupholstering, there is a risk that the fabric will break from the Seat Base.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Universal Product's Seat fabric was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
It is used in various Situations from street riding to mountain play.
【Included Parts:presence or absence】.
Only one Seat Cover, no Tandem belt was attached. To begin with, Tandem belt has not been attached to SEROW225W since 1995 (4JG2), even OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
Vinyl bags of Large size (Vinyl bags for Garbage collection and Large sturdy) are available for each person as a measure against flooding of the seat sponge, so those who use these bags should purchase them while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
In these days of daily whispers of skyrocketing prices, it is very nice to be able to get Seat fabric at this price.
Please keep up the lineup continuity.
View detail
Absolutely fantastic
Very impressed with the customer service and communication, definitely earned my trust for future purchases, thanks guys :) View detail
Fits: HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 90DELUXE, HONDA SUPER CUB70DELUXE
CT110 HUNTER CUB Tandem seat
I bought it because it is removable without tools.
Installation was a bit of a struggle at first because of the narrow gap under the normal carrier, but once you get used to it and get the hang of it, I think it will be easy.
I usually leave it on all the time without any problem, and I think it looks cooler than the Normal carrier alone, which makes the Rear look tighter.
When touring, it is easy to remove, so you can quickly change to the Container and go out in comfort.
If you are the kind of person who occasionally goes touring
I would recommend it.
I would have liked the tandem belt to be a little stiffer and tighter.
View detail
I used it on Cushion for a chair.
This is the third time I have used this Seat sponge.
At first I used it to improve the OEMSeat of the Initial Model Grom, which was a pain in the buttocks.
Reference https://imp.webike.net/diary/205834/
The second one. Torture Seat" The Seat of KLX125 (Initial Model) was used to convert the Seat to a wider Seat. It took a lot of time and effort, but the result was satisfactory.
This is https://imp.webike.net/diary/205834/I showed how to do it in
The third time I used it to improve Cushion for chairs.
The Cushion for home use has a very soft and thin Sponge, so it quickly becomes floppy.
Therefore, we decided to substitute the Sponge with this product, which is a urethane product for motorcycles.
First, take out the Sponge inside from the Cushion.
Shape the eyeNetSponge to that same shape.
Cutter knives are often used to cut urethane sponge, but it is always hang to use new ones. If the teeth become even slightly rounded, the sharpness will deteriorate.
This time I cut it with Large type scissors because it is thin.
Two sheets were not enough, so I also used leftover eyeNetSponge that I had saved.
Bond is used to attach eyeNetSponge.
When the shape is the same as the original Sponge, place it in Cover to complete the process.
Feeling of use
Hmm? Better, but still not good enough.
Songe lacks thickness.
A thickness of 2 cm does not seem to be sufficient to create a comfortable seat that wraps around the buttocks.
If the thickness is 4 cm, the seating comfort would be satisfactory.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Too slippery.
Crf250rally50, thank you md44 for your help, I also purchased it for the proper Position
The material of the outer skin is rough non-slip fabric that sticks to the pants like magic tape, so I can't slide my butt on it.
Regular Seat fabric would have been even better.
I have applied Silicon spray as much as I want to help my butt slide, but it still gets stuck.
It is better to replace only the Seat cover.
I like the Seat shape.
View detail