Reviews
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
OEM has been reduced and replaced.
If you're going to replace it anyway, Material:I made it to Stainless Steel
I like that it comes with a Cap.
In OEM, the cap is a minus screw and the pin is hexagonal, so it is very convenient to be able to use the same tools.
I just wonder if the Cap is too thick, or if it's a little frustrating that the head comes out.
I'm talking about looks (and it's not like it's a spot you'd scrape when you fall over).
I think I will choose this one when replacing other models of cars.
View detail
This is good.
OEM allotment Pin cannot be used interchangeably.
I was using Steel's 1 pc at a time, but Rust was ugly, so I replaced it.
Easier to attach and detach than separate ones, and rust-free.
This is better at all.
View detail
I got it right.
brembo GP4-RB (108mmPitch) Used in
I was nervous about ordering because I read in another review that there was only 1 pc in one product.:Set of 2pcs.
Therefore, one product is equivalent to one Caliper above.
It is not a Titaniumium coating but Titanium itself.
It is inexpensive for what it is.
Conscientious.
The bremboOEM pad pin is shaved off when the pad pin is removed and inserted, but this product is hard enough to easily enter the pad, which is good for mental health.
This type of parts usually arrives over-packaged, but this product arrives in very simple packaging.
I think this is probably an Asia import, but it is hard to say that the parts are not severe in practical dimensions, etc., and I do not see any practical problems with the product I actually received.
What I personally expect is the corrosion resistance of Titanium, which I think will be enough to satisfy me when it is Titanium.
In addition, βPin is also included.
These places are also very modest and conscientious.
(Relatively speaking) This is an inexpensive option to titaniumize Caliper's Pin.
It is not suitable for those who are Brand-oriented in every detail, but it is recommended for those who want Titanium in terms of functionality.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750 K3, SUZUKI GSX-R750 K1, SUZUKI GSX-R750 K1-K3, SUZUKI GSX-R750, SUZUKI GSX-R750 K3, SUZUKI GSX-R750 K1, SUZUKI GSX-R750 K1-K3
I think it is excellent workmanship. I am not sure about the durability.
I think the product is worth the price. View detail
brembo for new Crab
Pad pin of bremboOEM is a press-fit type and is troublesome to remove and install, so it was replaced with Titaniumium pad pin by Timing, a pad replacement company.
It looks beautiful and satisfying because it is Titanium.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
superior article
I tend to remove the pad spring because I don't like the trivial drag of the Brake, and as a result, it wears well with the OEM pad pin.
Stainless steel is strong and does not wear as much as OEM and prevents rust, so we replace it with the OEM pad every time we replace the OEM pad.
The price seems high when replacing this part with a single body, but by replacing the pad at the same time, the price seems like an error, so it is a recommendation.
View detail
Lightweight and durable, no complaints!
[How is it used?
The pad pin of the brembo 4POTCaliper was getting rusty and the brake started to squeal, so I replaced it with a new one for the purpose of repair.
Was the one you received as per Image?
The product was in simple packaging with air Packing only. There is no problem, but it was not a solid Package of Manufacturer.
Was the installation difficult?
Hang in, but just replace the OEM pad pin.
No tools are required as long as the pin is removed.
How was your experience with it?
The weight is lighter, and I no longer have to worry about Rust, so I feel more comfortable.
However, the Snap pin to prevent dropout should be checked.
[Included Parts:were they on?
In addition to the Body Pin, a Snap Pin is included.
[Was there anything that disappointed you?
The dropout-proof RPin was Steel.
Since the Pad pin is Titanium, the Snap pin should be at least Material, if not Titanium as well.:I would have liked it to be Stainless Steel.
View detail
Material:Replace with TitaniumPad pin
I was concerned about rust and uneven wear with OEMPad pins, so I decided to use this material to make maintenance as easy as possible.:I purchased a TitaniumPad pin.
Although you have to look closely to see the change, it is lighter than the OEMPad pin.
I am satisfied with the high quality of the product.
If the durability is good, I would recommend it without any complaints, but this is something I cannot judge until I use it for a while, so if there are any problems, I would like to add and correct them in Impression.
*However, we have used the company's pad pin in other vehicles and have had no problems so far, so we consider Large sturdy.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
High recommended parts
today i change the rear brake rotor and overhaul the caliper. the brake pin has seriously rusted and damaged
so i cleaning all the surface of caliper and (not changed caliper piston...and Oring) and little add high-temp lube on the surface of pad pin
it's stainless steel but you never know...haha... new pad new pin... they need some time to working well
anyway im so satisfied rear brake now realy smooth works and brakeing like Knife
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Plug cracked.
First, let me say that this is a special case based on a combination of several conditions.
After cleaning the Caliper, I put it back together, tightened the pad pin, and was finishing up by tightening the plug when I heard a cracking sound. I thought the tool was broken, but it was not. As you can see, the wall of the plug had cracked from where it was thinning.
Now, the conditions at the beginning are as follows.
The Plug itself is thinly veiled.
The Plug is a type of car that is only half filled.
Over exertion of force
In other words, it ripped as if it was pushing the unrestrained wall from the outside. After pinching it off with the pliers, I decided to use the NORMAL plug, which fits better, because it was awkward to have the plug sticking out.
The Pad pin itself has no problems at all, with excellent texture and feel.
View detail
Fits: YAMAHA OEM SumitomoMOS Monoblock caliper TitaniumBrake Pads Pin
Pad pin replacement for ease of maintenance
I had been lightly applying water-resistance paper to the OEM pins, but I began to worry that it might accelerate the wear of the pins, so I decided to use Material:I thought maintenance might be easier with Titanium, so I purchased this product.
I have purchased TitaniumParts for CYGNUSX in the past, and I usually prefer Titaniumium color without surface treatment, but this time, I decided to go with Champagne gold because it is an installation point where shavings from the pad may adhere and friction with the pad may be harsh. However, this time, I decided to use anodized Champagne gold because the pad is likely to be subjected to abrasion and friction with the pad and because the Brake Pads are gold, so it would be less noticeable.
Compared to OEMPin, it is very lightweight and seems to remove dirt easily, which I am satisfied with.
After running for a while, there seems to be no particular problem, so we plan to apply a Clip dropout prevention in the future.
View detail
A little long, but no problem.
Used on front brake caliper for Honda NSR250R MC21.
I got a used Brake Caliper that did not have a Pad pin.
It was frustrating to go out of my way to buy OEM, so I was torn between DAYTONA's Stainless Steel pad pin and Titanium64's Titaniumium pad pin, but I chose Titanium64's Titaniumium pad pin because the price difference was not so great and I wanted to reduce the weight as much as possible. I chose the Titaniumium pad pin because the price difference was not so much and I wanted to reduce the weight as much as possible.
The quality and texture are second to none.
Once installed, these parts are completely invisible, so they tend to be put off as custom parts, but they are highly recommended.
The brake area is easily contaminated with brake dust and prone to rust, so we think the titanium conversion is a good way to improve maintainability.
Stainless Steel is not rustproof either.
Incidentally, many of these parts are universal to some extent, and I think this product is the same as other NISSINCalipers, although the part numbers are different.
It is made a little longer than OEM Product and has a slightly higher penetrating volume.
It is completely safe to use
I would have liked to put a Beta pin on it, but I don't have the skills or equipment to drill a precise hole in thin titanium, so I gave up on that.
Note that for Front is Quantity:1 Set for 1 Vehicle (Quantity):(2 pcs) It was in.
Pad pin is the Quantity:Is there 4 2pc front double disk vehicles in the box? I think so.
In general, I have no complaints at all and recommend Custom parts.
Buying OEM Parts as for Repair is a good option, but it is also a good price option.
View detail
Fits: Others
Ensure inspection before shipment
The product is fine.Quantity:I ordered 1 set of 2pcs. I wanted 4 bottles, so I ordered 2. I wanted 4 bottles, so I ordered 2.
I recently asked a question about Brembo radial caliper and the OEM Product is Brembo radial caliper, so if the installation Pitch is the same, it can be installed, but it is not compatible with your vehicle. Brembo radial caliper is a Universal Product per installation pitch? Do the people working here understand the structure of Motorcycle?
View detail
for BremboRust measures Pad pin
brembo BilletCrab caliper (120.A441.10) Mounting on
brembo 84mm PitchCutting Type Crab caliper (so called BilletCrab) I installed it in
Beta pinQuantity:Pad pin of Type to be fixed with 2pcs.
The BilletCrab came with iron-like pad pins, so I was worried about rust, since it was the undercarriage.
There are some Titanium pad pins available from ThirdParty, but they are too expensive…
So here it is.
The base material is stainless steel, which is resistant to rust, and the surface is coated with titaniumium.
At the very least, I believe it will serve the purpose of Rust measures well.
further (Although it is subjective) It is a classy gold with a high quality texture, a knob on the head for easy maintenance, and even a hole in the head for wiring, with the letters ”K” proudly displayed on the top.
The texture and functionality are perfect.
Although we are fully satisfied with the content, 2,000 yen seems a little expensive from a sensory point of view.
(Material sold for more than double the price.:Titanium is out of the question.)
However, it is a niche product, and I am convinced that it is within a reasonable range.
View detail
You can't see it after it's installed.
It's not visible after installation, but OEM is a part that rusts quite a bit, and it's a large cut to start with to keep it clean. I am satisfied with the price. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
It's shiny and cool.
For those who want to upgrade with OEM replacement
It's hard to lick, hard to decay, and also cool.
Recommended for people who ride Honda motorcycles, but be careful with the length.
View detail
Fits: KAWASAKI 1R, KAWASAKI GPZ900R, KAWASAKI KR-1S, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 2, KAWASAKI ZRX1100 2, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400 2, KAWASAKI ZRX400 2, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R
More than OEM?
I usually use OEM, but this is the first time I'm using OEM. OEM is getting strange wear & rust even after applying CopperGrease. I wish they didn't rust. I will replace the pad when I replace it, as it is consumable. View detail
Replace with new one
The surface of the brake was rusty and dirty during maintenance, so we replaced it with a new one. The parts used are sold as a single item, which is a big help since they can be replaced with new ones. View detail
It's a consumable item.
There are some stainless steel pins in the world, but I think it is better to buy OEM Parts as they are consumable. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Resistant to rust
Rust resistant Material:Stainless SteelPad pin。
It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.
Features easy maintenance and performance retention, but hard Material:The surface of the shaft that touches the pad is flattened a little.
It doesn't feel like it's deforming more and more, but it doesn't feel good because I never had this happen with OEM Parts. But OEM parts will rust....
I give it 3 stars because it is rust proof and I haven't had any Trouble.
I think the price is high compared to the quality.
View detail