Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

High Speed Pulley With Weight Roller Clear all

DAYTONA

13 Apr 2021

High Speed Pulley With Weight Roller

Fits: YAMAHA Cygnus X 19, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR

Japanese Webike user

4/5

It seems good.

I used it for CYGNUSX (1YP2).Quantity:Use the Ramp Plate as shown in the instruction manual with a Weight of 11g.
I sanded and installed the BALI of The setteIng of the satisfaction was out there, but it was 9800 at the highest speed.
It was about 9200 rpm, so I thought I would lower the rpm and do the same etc., but I achieved it at about 9200 rpm as I aimed.
The engine body was NORMAL except for the Takekawa Power Silent Oval Exhaust System, so I decided to go with the Pulley.
It seems to be good that the body itself is not too light. I will install their reinforced V Belt in the future, so I am looking forward to the change.
I think Matching is good for 1YPNormal engine. (I also referred to other Site.) View detail

DAYTONA

19 Apr 2020

High Speed Pulley With Weight Roller

Japan User(translated)

4/5

Immediately after the exchange, I was able to experience it

When I decided to replace the Weight Roller to get better acceleration, I decided to use the Pulley Set I bought it because it was reasonably priced at
The weight of the Weight Roller is a little lighter than the OEM, but you can feel it right away The acceleration has improved enough to be able to do it However, the acceleration is still bad after getting used to it
I think so View detail

DAYTONA

12 Oct 2019

High Speed Pulley With Weight Roller

Japan User(translated)

4/5

Almost good

If anything, we expect to see an increase in performance rather than acceleration
You can read about it in the Handling Instruction Manual
Don't forget to take the BALI off the Ramp Plate!
That and the attached WR is too heavy!
Even in a completely NORMAL vehicle
9.Starting with about six 5 grams
Find the WR of your choice View detail

DAYTONA

14 Sep 2016

High Speed Pulley With Weight Roller

Japan User(translated)

1/5

Bad quality

I bought a high power pulley at a neighborhood nappus, and at the same time I replaced a Daytona slide piece, reinforced V belt with a new one. Slide rib inside sliding piece and high power pulley (3 places) There is no clearance at all, the slide pulley and the clamp plate caught from the start, the engine only blows and the accelerator can not be fully opened. Finally I got the high power pulley replaced by Naps, but as a result I can not use the Daytona made slide piece as it is, scrap inside the slide piece and use it 0. It is a choice whether to use a small 5-mm-sized slide piece made by Kitako, separately purchase a slide piece made by Kitako to eliminate the catch. However, even if the accelerator is fully opened in the vicinity of 30 to 40 Km, engine blowing is bad, when confirming removal of the high power pulley, the Teflon coat is peeled off while traveling 100 km, the slide piece is caught in the slide rib and the blowing is bad Also known. Here, peeling off all the teflon coat of the slide ribs, the problem was solved by mirror-polishing the surface of three ribs with poor precision. In addition, acceleration of the attached weight roller 13 g does not differ much from the normal at the intermediate speed from the start, there is a possibility that if we change the weight roller to 12 to 11 g, we want to try. Under present circumstances it is better to insert 14 to 13 g of weight rollers into the genuine pulley. (The maximum speed is around + 10 Km with the meter reading) When exchanging defective products, all the work costs are burdens on the purchaser, and it is a tuning part that can not be recommended absolutely. View detail

DAYTONA

26 Aug 2016

High Speed Pulley With Weight Roller

Japan User(translated)

4/5

To increase withdrawal

I've been using a bunch of other company products
I settled on a certain Pulley
I bought it to increase the number of options or drawers
Although COSPA is expensive
As for attached WR as for STD Vehicle
I feel too heavy View detail

DAYTONA

09 Jul 2016

High Speed Pulley With Weight Roller

Japan User(translated)

5/5

This is good.

【What made you decide the purchase?】 Required
Be made by DAYTONA.
Interest in having the attached Weight Roller 11 g.
【How was it actually used?】 Required
Weight Roller I was surprised that the weight would change so much with OEMMinus 1 g.
Weight Roller Just by increasing the number of revolutions by lowering the weight by a few g, even if the acceleration is improved, the Engine speed will also rise to maintain the same Speed. Large If you want to run a lot of people it is annoying. Certainly this Kit also rose by about 500 revolutions. I was not as bad as I can not stand it, now we have only 3 Weight Roller 12 g.
Still, the shape of the Roller guide is good or it accelerates. It is not a rush that will never rise.
Perhaps it is best for us to ride as usual only to replace this part.
【Was it difficult to install? (Hard parts case)】 Any
There are no particularly difficult things. Weight Roller installation is possible if exchangeable.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
Although it is written also in the manual, once it does not do BALI taking of OEM's Ramp Plate considerably carefully, despite using Weight Roller made by DAYTONA, Wound attaches to Body regardless. It is a pity that Weight Roller only moves.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
None
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
As for the matter of chamfering, I wanted you to write more firmly.
【Have you compared items?】 Required
None
[Others] Any
Because it was pointed out that Teflon processing immediately comes out with Impression of the other person, it peeled off before assembly.
I do not know if it was the correct answer.
* Optional items can be filled in as much as possible. View detail

DAYTONA

04 May 2016

High Speed Pulley With Weight Roller

Japan User(translated)

5/5

CYGNUS X3 Taiwan Spec. The mounting

I wanted a change in the running performance, because the evaluation was high purchase

Impression when Normal muffler.

I was wondering whether it was heavier WR than Taiwan OEM, but worrying useless. Compared to OEM, it changes to Fe Ring which is pushed out by Torque.
Although there is no radical acceleration, ease of use near 40 to 70 km frequently used increased, so it became seasoned very easy to ride.

Just to say so, I wanted the sharpness of the shoot a little more so WR changed to 10 g X 3.
Somewhat feeling. View detail

DAYTONA

03 Feb 2016

High Speed Pulley With Weight Roller

Japan User(translated)

5/5

Cospa best

14 years installed in FOR JAPAN MODELCYGNUSSR!
Shim washer added to make it 1 mm long and used.
Change to DoctorPulley 10g.
Snake cone pipe.
Others is NORMAL!
FOR JAPAN MODEL has lost its unique feeling of slickness and it has made quite a sharp running. It was also another impulse, but there are things that only come out at this time.
It is worth to try people who are thinking of wanting to keep up with it.
If it will change so far at less than 5000 yen, it will be difficult to say.
If it says strongly, it would be better to change Belt and Clutch
Large This item is satisfactory. View detail

DAYTONA

13 Dec 2015

High Speed Pulley With Weight Roller

Japan User(translated)

3/5

Less going on - -

Net purchased because it has a good reputation for this is for FOR JAPAN MODEL but installed in CYGNUS X 5 Taiwan.
I wanted to improve the outing delayed by TEMPO 13 at the start of Normal pulley's exit but unfortunately there was no difference between Normal pulley and Large. Although it may be improved if you add a lot of Shim washer, something you did not want to put too much into considering the Belt burden...

Regarding medium speed and high speed, the feeling of Torque slightly rises from Normal pulley.
It looks like Weight roller 9g made by OEMPulley & DoctorPulley.
In addition, regarding the Black fluoride processing of the Roller part, it peels off and it gets stuck to the Weight roller side when using about 30 kg, so it may be better to peel off in advance and use it.

For Pulley who runs entirely for those who run chillin, Roller comes with the included 11G, 10 or 10. Around 5.. We do not Recommendation to make it too light for this Pulley only.
Although it is a dramatic change to the body of the Japanese specification, Taiwan Spec. Pulley has not much difference in car in car.

I changed to Normal pulley & Shim 1 mm & Doctor 9 g because Fee Ring did not suit me. View detail

DAYTONA

18 Nov 2015

High Speed Pulley With Weight Roller

Japan User(translated)

5/5

Discontent Zero, Large Satisfied. Awesome performance.

2015 SE44J 1YP FOR JAPAN MODEL MODEL exchange with CYGNUS

Before this was BMF's 13. 5 ° Pulley
After that I thought about setting at 14 ° OEMPulley WR 7 g
Face forged by MFR 13. 5 ° Mono
Torque Camshaft uses straight groove of NCY
Boss is 1. 5mm Long
Exhaust System is WJ's scooped Pipe

Pulley of BMF company was satisfied enough, too, but Pulley of this DAYTONA company was bothered by all means and purchased according to Sale

What I was concerned about is that the attached WR is 11 g ...
Taiwan Spec. 9g is a classic and other Pulley is almost 9g
Among such 11 g
Still boil down the Roller guide ...
Once you get to it, you have to try it again ... w

Result ... This is amazing!
I run even 11 g
Torque There is a feeling while the number of revolutions also rides the Beauty
Pull out Boss Washer 1. 5 mm Long boss only
Still 7 g X 6 to OEMPulley, Boss Washer added 0. Good acceleration from 5 mm state
Torque feeling is bathered while guigui speed gets on

The width of the Roller guide is the same as OEM. So it would be a benefit of the Roller guide shape

I tried measuring each part

Width is OEM ratio + 5 mm
Weight is OEM ratio - 34 g
Pulley's angle is the same as OEM 14 °

was
Even if it is an OEM, even if it comes to the number of revolutions in which power inevitably exactly it was a dull feeling so far is solved one shot

I am trying putting 9 g at the moment, but it is pretty fast w
Add Boss Washer 0. I changed the WR to 9 g at 35 mm and shook it further, but the highest speed was 3 digits + 7 km / Confirm about h

Rotation speed reached 9500 rpm and Rev limit
It is the first time I have reached this point
So it would be better if we had only 3 got 11 g ...

Both acceleration and maximum speed are compatible
That's excellent
Packaging was also terrible polite and I was impressed with it too

We have used various Pulley anyway in various cars in the past, but there are few things that can be satisfied solely by Pulley
This is really a Recommendation!
Bore up car etc.. Okay, 13. I think that we can also demonstrate 5 ° Pulley's bottom power, but I think it is the best match for STD Engine Displacement

I was admired. View detail