Reviews
nice very plate!
I bought a G-craft heel plate. There is a heel plate, so you can drive more safely when driving. The heel is fixed, so the grip is good. I'm sharing the installed picture. View detail
It's just like the name says.
I drove about 100 miles after installing it, and there are many places where there are no traffic lights, so it's just for reference.
I'm not sure how it's going to work on my commute, but the Change feeling is katch and good.
The only problem is that it seems to be stiffer at low and downshift, but I don't think that's a problem.
As a result, after installing the KITACO Shift link, I felt that the amount of neutrals was improved.
After that, I could put the Neutral in while driving or after stopping, and it would go in with one shot.
When I was only using the Shift link, it was 1 or 2 - there was a display, but I think it definitely raised the level.
It's only about 100, so we'll see.
The LINK alone was much better than the NORMAL, but the Guide and the Shift sensation satisfied me.
The normal bolt is iron, but it is not magnetized, so I think the bolt that comes with the Guide is SUS.
View detail
Good Performance Parts
This pedal set was perfectly fit on my 2022 Honda Monkey 125. It included shift link itself, and don't need to buy that seperately. This helps quick shifting gear with our hussle of gear change. Great parts! View detail
Fits: HONDA CUB SeriesHorizontal TypeEngine 12V
More than the price
It is over the price 。 Horizontal TypeEngine neutrals will be easier to enter. View detail
Shift goes in nice and easy!
Installation is Bolt On, so it's easy.
In the test run after installation, Shift goes in well ScauperScauper and Small.
The texture is good, but it is a pity that it is not a very visible Parts.
View detail
G-Craft axle collar black
Since the shaft seals started to whistle on my motorcycle from approx. 85 km / h I had to remove the brow, which was supposed to simplify the assembly, on the lathe. I had the problem on the front axle of a Honda Monkey and a Honda MSX / Grom. View detail
G-Craft axle adapter for GROM
Since the shaft seals started to whistle on my motorcycle from approx. 85 km / h I had to remove the brow, which was supposed to simplify the assembly, on the lathe. I had the problem on the front axle of a Honda Monkey and a Honda MSX / Grom. View detail
Front suspension movement
They are more expensive, but the fork movement is better than OEM Parts. View detail
I put it on.
I ordered it and received it in about 3 weeks. It was a part I wanted to put on by greed. lol
The one you received is still beautiful.
I used the car's pant jack to float the body, but it was a little dangerous... sweat.
I'm very happy with the way it looks on me.
I'm looking forward to seeing how much the straight line stability has changed because I'm mainly touring.
I've got 6 more miles to go, but with the shocks and all, when I put the stand up. I sleep more than before.
Not enough to knock me over.
With an extension of 10, I'd definitely change the stand.
View detail
Feel the firmness in the Shift!
I feel that Neutral is a little easier to produce.
GEAR is also a Recommendation because it makes it easier to enter ScauperScauper.
View detail
Fits: Others , HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA CHALY, HONDA BENLY , HONDA APE
Can be used for external Rear Sets
It fits to the pedal of OverRACING's Rear Sets. It can be installed smoothly by spraying the Parts cleaner inside, the same way as how to install the Handlebar Grip. View detail
Fits: Others , HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA CHALY, HONDA BENLY , HONDA APE
For use with other companies' Rear Sets
Installed on a GSX-R1000R 2019
BabyFace Rear Sets (item number：002-S020GD) The bar at the tip of the pedal is a plastic rod with a screw cut directly into it, and I don't like it because it is not easy to assemble and it is slippery when using it;
When I tried to order a Single Body, I was told to check the Parts List that comes with the purchase and order by part number. I couldn't get a reply.
I found this product in my search for an alternative that I could use.
Material sold in conjunction with the:Basis of Aluminum (Item #:620021) And Quantity:Set
This product is a Rubber Bush that only fits, so it is not necessarily 620021 and Quantity:I think that it is possible to use it by replacing the rubber part of OEMPedal without using it as a set.
It doesn't look particularly textured, but it's usually good.
It is not so uncomfortable to put it on the Rear Sets of BabyFace which has an established reputation for texture.
The most notable thing is the price, which is less than 900 yen including the root part.
The quality at this price is nothing short of amazing.
I installed Rear Sets, but I don't like the Pedal tip bar.
Pedal tip bar fell off and lost.
Rubber of Pedal has been deteriorated.
I think this is the best option for people who want this part of the Pinpoint, such as
View detail
For use with other companies' Rear Sets
Installed on a GSX-R1000R 2019
BabyFace Rear Sets (item number：002-S020GD) The bar at the tip of the pedal is a plastic rod with a screw cut directly into it, and I don't like it because it is not easy to assemble and it is slippery when using it;
When I tried to order a Single Body, I was told to check the Parts List that comes with the purchase and order by part number. I couldn't get a reply.
I found this product in my search for an alternative that I could use.
This product is firmly Material:Aluminum.
And Screw hole is m6.
Rubber Bush (Item #:620022) It is used in conjunction with
Also, it has a part to hang the tool when tightening for installation.
It doesn't look particularly textured, but it's usually good.
It is not so uncomfortable to put it on the Rear Sets of BabyFace which has an established reputation for texture.
The most notable thing is the price, which is less than 900 yen when combined with Rubber Bush.
The quality at this price is nothing short of amazing.
I installed Rear Sets, but I don't like the Pedal tip bar.
Pedal tip bar fell off and lost.
I think this is the best option for people who want this part of the Pinpoint, such as
View detail
It looks, Position, Shift change is up, etc.
It's pricey but I'm glad I changed it sooner.
I feel like a Racer and I enjoy breaking in.
Black is calm and up, etc.
View detail
Shift is easy to change.
It's easy to change the shift because it's compatible with Rear Sets. View detail
Quality is good
I've heard a lot of rave reviews from other people, but I'm a slow learner and I couldn't feel any of the effects.
However, considering the strain on the Shaft of the Shift Pedal and the structure beyond, there is a Merit that allows you to kick the Shift Pedal off comfortably.
You will of course need to remove the Shift Pedal to install, but it is part of the Review You don't have to remove the footpeg. It was not.
Minus1 of the texture is that there is no Shield on the Engine side of the Bearing.
I applied Grease and then installed it.
View detail
Fits: HONDA CHALY series 10InchWide wheel (3.5J), HONDA CHALY series 10InchWide wheel (2.75J), HONDA DAX, HONDA CHALY series 10InchWide wheel (5.5J), HONDA CHALY series 10InchWide wheel (4.0D)
I use it on my DAX rear wheel.
When I replaced DAX's RearDefferential Gears with Takegawa's for MONKEY, I found that the
We built it in together.
The wheel was made by Minimoto, so I was very nervous when I put it together.
It didn't interfere with anything and was easy to install.
I really like it because the finish is Beauty and it looks NORMAL at a glance.
I recommend the 4 Spokes as they are large and easy to clean.
View detail
Wheel seeks a perfect circle
I've heard that GCraft's Wheels are pretty close to a perfect circle, so I bought them because peace of mind starts at the feet!
The bolt holes are exactly where they should be.
View detail
Smooth shifting with no more false neutrals
I have been using this G Craft shift guide bracket for around two years now and can say they are well worth the purchase price and I can recommend them five stars. I hear people complaining about poor shifting from their Honda Grom or Honda Monkey 125 and tell them of this product to help resolve their issues. Installation is simple and comes with all the hardware required. Is fitted with a sealed bearing so no up keep or maintenance is required for smooth shifting with no more false neutrals for many miles. View detail
Nice one, GCraft!
How many months have you been looking for jc92 compliant Rear Sets? I decided on GCraft so that I can tandem with my grandchildren and daughter. In the Normal step, my foot is too far forward and I am tired of the position like Harley's XL1200C SPORTSTER 1200 because I lowered the Handlebar. Racing Footpeg is too far back, so I decided to use GCraft of TouringStyle. Is it the right answer?
It's not too tight and not too tired.:No problems with the controls. Tandem fun with grandkids.
View detail