Reviews
Fits: HONDA BENLY50 PRO, HONDA BENLY50, HONDA Byte, HONDA TODAY, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA ZOOMER, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA GYRO CANOPY, HONDA GYROX, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA CREA SCOOPY
Thank you.
No problem
Easy to use
Thank you.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used for CRF250L MD44
Silencer and Exhaust pipe were removed once for repair and Gasket was replaced.:I think it is a bargain since it was priced at 1 set of 2pcs.
If I were to raise a complaint, it would be about the Quantity:2pc. When will the day come when we use Set eyes… and
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
It's still good
I have been using this product series from Large Motorcycle to Moped for a long time.
I do not use the old ones because there are no exhaust leaks and they are inexpensive, so I feel comfortable installing new ones every time I use them.
If you are concerned about the possibility of exhaust leaks after reuse, the safest thing to do is to use a new one.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250, YAMAHA DIVERSION600, YAMAHA DIVERSION400, YAMAHA XZ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ750D, YAMAHA XJ650
Exhaust pipe replacement consumables
[How is it used?
The exhaust pipe of XJR400R was replaced and the exhaust gasket was also replaced.
We purchased a reliable and trustworthy KITACO gasket because OEM gaskets are expensive.
How was your experience with it?
First of all, as others have written, it does not fit exactly, but there is a little gap, so if you leave it as it is, it will fall off.
I had a Liquid Gasket on hand, so I applied a thin coat and installed it in place of a bond so that it would not fall off.
By tightening it, it will widen slightly and firmly prevent exhaust leaks.
How did it compare to other products?
It is no different than the OEMs that have come before.
[Points to note]
Quantity:1 Set of 2pcs. so naturally, Quantity is required to use for XJR400R.:2 Set purchase is required.
【Review】
It is just a Gasket, so it does not have any special characteristics, but you can be sure that you choose KITACO products.
It is less expensive than OEM, but no particular problem.
View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
Great product
Fits perfectly on my CB1000SF '94, I am not yet sure though if it's really a one-time use as advertised. Nevertheless, product is great. View detail
Fits: YAMAHA SR400 1JR, YAMAHA SR400 3HT1-9, YAMAHA SR400 3HT1-A, YAMAHA SR400 S 1JR, YAMAHA SR400 S 3HT1-9, YAMAHA SR400 S 3HT1-A, YAMAHA SR500 1JN, YAMAHA SR500 3GW1-9, YAMAHA SR500 S 1JN, YAMAHA SR500 S 3GW1-9, YAMAHA TX650 All models, YAMAHA V-Max1200 3UF All models, YAMAHA XT250X 5C11-, YAMAHA SEROW250 3C51-55, YAMAHA SEROW250 FI 3C56, YAMAHA SEROW250 FI 3C5C, YAMAHA XG250 TRICKER 5XT1-7, YAMAHA XG250 TRICKER(FI Vehicles) 5XT8-A, YAMAHA ROYALSTAR1300 4WY1-, YAMAHA ROYALSTAR1300 TOUR CLASSIC 4WY1-
Exhaust System Replacement
Purchased because I replaced front pipe with Other Brand Product!
Compared to OEM Product, the price is about twice as much.
K-PIT is sufficient since it is consumable.
View detail
Fits: HONDA DAX, HONDA GORILLA, HONDA MONKEY
It's working just fine
I can use it normally as Exhaust Gasket. No problem at all. View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
easy to use
I think the tightness feeling is good. The package is too large. View detail
Fits: KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
Quick response
The product arrived quickly and was very helpful. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
No problem
The product is good only because it is made by KITACO. It can be used without any particular problem, and the quantity:I think it is cosmetically good with 1 set of 2pcs. View detail
Fits: KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA2 Helmet50RR, KAWASAKI Z250 (2013-), KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250, KAWASAKI NINJA250R
Required for Exhaust pipe replacement
This is required when replacing the PowerBox. It is simply installed with the Liquid Gasket. It does the job well with no leakage of the exhaust Gas. Quantity for spare:I purchased 1 Set of 4pcs. but actually 2 is enough. View detail
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
Just size for old Motorcycle
HondaA-AF09Courreges TACT used in 85 years.
I was worried about the availability of KITACO products since I have a very old motorcycle, but I am glad that KITACO has their products.
When I removed the Exhaust System and saw it with the original, it was Just size and really helped me out.
The old Gasket is an old 2Cycle and I thought it was too large when I removed it, but it was attached to the exhaust system and I was able to remove it quickly with a slotted screwdriver.
The Gasket itself has the same structure as the OEM parts and is KITACO's product, so we can use it with confidence.
I have only driven about 100Km after installation, but I have tightened the bolts and there is no exhaust leakage.
I would like to say thank you to KITACO for continuing to stock Parts for old cars.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Quantity at the same price as OEM:1 Set of 2pcs.◎No complaints about the quality of the product.
I used it to replace an OEM Exhaust System with a Third Party Full Exhaust System.
Due to various circumstances, it had to be reinstalled and the included Quantity:2pc. We will be using both Set.
Price
This product is the same etc. price as OEM Gasket.:2pc. It contains Set's Gasket.
Performance
As mentioned above, the Full Exhaust System installed on the Gasket had to be removed for various reasons, so we looked at the Gasket and found that it was properly crushed without any cracks, so we can say that its performance as a Gasket is sufficient.
Unless you are an OEM, I think you should buy this one.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Serves the same purpose as the Honda gasket
About quality and texture, I can confirm that the quality is great and that the material used is a metal gasket that deforms when pressure is applied to seal between the cylinder head and the exhaust header pipe. About the feeling of use, Serves the same purpose as the Honda gasket, no noticeable difference.Seals well with no exhaust leaks present. Products to buy together, For you exhaust installation it would be ideal to add high temperature silicone to your cart to seal all the other exhaust pipe connections for a zero leak installation. Difficulty of installation, I can say the fitment of the exhaust system gasket for my installation is was very easy due to the ease of access to the exhaust stud nuts and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive a gasket to use and a spare made differently from the Honda gasket but serves the same purpose and are priced the same as the Honda gasket. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
For the LITTLE CUB, it's consumable. (Cheaper than OEM Product) 。
[How is it used?
I purchased this product to use when replacing the Exhaust System on my long neglected LITTLE CUB that was given to me.
The OEM Exhaust System was used to replace the OEM Type Other Brand Product because the lower surface of the OEM Exhaust System had become rusted and worn out due to moisture and age.
When I actually owned a LITTLE CUB, I found it troublesome to remove and install the exhaust system every time I removed the shaft of the rear wheel to change tires or sprockets. Do I have to replace the exhaust gasket every time I do that? I felt indescribably happy.
It is said that there is a backdoor technique, but in case of OEM exhaust system installation, the silencer part of the exhaust system and the shaft are on the same line, which is the most troublesome spec. for maintenance, and the exhaust gasket is not in quantity.:This product is very helpful for DIYers, as it is 1 set of 2pcs. and reasonably priced.
How did you like it?
This is a great product with OEM same etc. Exhaust Gasket.
How did it compare to other products?
I have only used OEM products or KITACO products for the Exhaust Gasket, so I am only talking in that category, but as I mentioned above, my personal impression is that it is the same as OEM. "Inferior." I have never felt this way before, and I have used it many times in the past for various types of vehicles.
[Points to note]
In the case of older vehicles, the area around the exhaust pipe on the engine side may be obscured by soot, and since the gasket is also crushed, it is easy to overlook and often forget to remove the old gasket.
Other items that would be helpful
【Included Parts:presence or absence】.
Exhaust Gasket is the Quantity:2pc. There are no Included Parts:only SetPackaged.
I would like to see the status quo maintained rather than the price increase due to unnecessary decorations and Included Parts:.
[ITEMS TO BUY TOGETHER
This product is used when removing and installing the Exhaust System, so if you want to replace the Exhaust System with Other Brand Product, please select the desired Exhaust System.
If you remove and install the Exhaust System with bare hands, sebum and oil stains will adhere to the Exhaust System and discoloration or burn marks will easily occur when the Exhaust System is heated up.
[Opinions and requests to Manufacturer
Please keep the price at the current level as much as possible.
View detail
Fits: YAMAHA YB-1, YAMAHA YB50, YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh)
It's solid
Used for VIRAGO
It worked well.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Neither possible nor impossible.
Not an OEM Product, but no problem.:1 Set of 2pcs. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
usually
I don't know because I had it installed, but I wish it had been included with the purchase of the exhaust pipe. View detail
Fits: YAMAHA ZR EVOLUTIONZII, YAMAHA ZR EVOLUTIONZII, YAMAHA ZR EVOLUTION, YAMAHA ZR EVOLUTION, YAMAHA Vino (VINO), YAMAHA JOG Z-II (JOG), YAMAHA JOG REMOTE CONTROL SYSTEM (JOG), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG COOLSTYLE (JOG cool style), YAMAHA JOG COOLSTYLE (JOG cool style), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA GEAR C (GEAR), YAMAHA GEAR (GEAR), YAMAHA GEAR (GEAR)
Quality OEM exhaust gasket
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON S&S X-WEDGE Engine
In preparation for vehicle inspection
The gasket of the exhaust pipe had not been changed for decades, and since it was rare to remove the exhaust pipe, it had been overlooked. As expected, the Gasket had not been changed for decades, so it had almost lost its function. I have to do a thorough check once in a while. View detail