Reviews
The palm section was a little Tight.
I chose S Size because my fingers are short.
Even with S Size from other companies, there are times when the fingers are left over or the palm of the hand is duffed up.
These Gloves were just the right size with no extra fingers … but
The palm of the hand, or rather the Small phalanx of the ring and Small fingers, feels Tight,
This may be a concern when wearing it for long periods of time.
One sizeLarge may be a good choice.
View detail
Good cosmetics, just be sure to check the stitching of the interior after purchase!
I purchased two pieces for practice.
The durability is quite good, but the mesh inner sewn on one of the two pieces is not sewn on very well, (Twisted and stitched) My feet do not go in properly without Knee brace.
It is a shame because I am satisfied with the Others because I can wear it if I force it in, but it is quite Stress, and I realized after using it for quite a while that I can no longer return it for exchange.
The size is quite tight from the knees down, so you might want to go up one size. (FOX, AlpineStar is just fine at 32 and DFG at 34)
View detail
Equipment that can reliably protect the upper body
I chose this equipment because I had suffered a hard blow to my shoulder when I fell down and hit my chest in agony when I stumbled.
So far I have not fallen down using it, but compared to the 4.5 I used before, Shell's protection is indeed harder and thicker, especially in the chest and abdomen area.
4.While the Handlebar 5 was flexible enough to flex the abdomen and chest when leaning on the Handlebar, this one maintains the original shape of the entire structure and feels as if it is supported by the entire surface, without any localized pressure.
The Image is such that the Protector itself keeps its shape and protects the people inside.
The interior cushion material is also designed to be appropriate for the grade, and there is no concern that the surface fabric will peel off after repeated use and washing.
If there is a problem...
The price of enhanced defense is that upper body mobility is more restricted than in other grades.
To be an inner protector, it should be massive and wearable. (Not possible depending on your physique)
The lock of the Belt on the flank that connects the front and back is stiff. (Pushing is not a common type of buckle, but a solid gold clasp made of gold, which can be pushed in with a little force after being hooked.)
Although it is the highest grade in terms of series at the moment, other grades may be better depending on the environment and riding style, so we hope you can compare them and make a good choice.
View detail
Does not interfere with driving
I bought this product because I saw an imprement that this product is thin and has a good Fit feeling. The fit is actually good and I feel secure.
The chest area is not too thick, so I can wear the Leatt brace without any problem and I don't feel any pain in my neck.
We do not know yet about the impact resistance, as we have not had any Large-sized stepping stones or falls.
I think it would be cosmetically pleasing as well, since I think it would last forever if my stomach shape did not change.
View detail
Lightweight and stylish, but not compatible with Neck brace
Very lightweight and stylish, with good breathability and a great fit both inside and out.
Cost performance is also high for a product in this price range, equipped with a removable shoulder guard.
The Waist area also has a slight wrap-around structure, which provides some security.
However, note that it is not compatible with Neck brace for a recent Guard.
Also, I am 170cm 85kg and bought L/XL, but the size is a little too large, so I think S/M would have been better.
View detail
Durability...
First of all, I had a good impression of the fit when I put them on, but the fingertips are Inner Sewing, so the area around the fingernails is creaky.
Next are my impressions after riding for about 1-2 hours at temperatures around 10°C.
It is not unbearably cold at temperatures below 10°C (50°F), but at around 6°C (41°F), it feels cold, but it is not unbearable. (But if it's colder than that, it's going to be tough)
I wonder if the durability is commensurate with the price, but the first time I used it, it started to unravel very quickly.
I wonder if this is difficult even for those who can consider it a consumable item.
View detail
Easy to see
Mirror Lens, but the field of view is brighter than the company's Silver Mirror and easier to see even on cloudy days. View detail
Draping is excellent!
Gloves for summer.
Used until recently because it was hot this year.
It will probably be active early in the spring as well.
Until now, I have always considered thin gloves to be disposable and purchased them from NetSite, knowing that they were fake.
I wanted to get it right, so I bought it on webike.
The characteristics of the fake cheap Gloves.
The stitching of the Magic tape is weak.
The edges of the Magic tape are left uncut and fraying.
The adhesion of the rubber parts (Protect, Design) is weak.
Sewing is generally weak.
Flat cutting.
[The good thing about these Gloves.
The sewing of the Magic tape part is solid.
The Rubber part also doesn't seem to be peeling off.
The cut and sewing are three-dimensional, and the fingers are naturally bent to hold the handlebar.
The details are well made.
It is cool enough.
Fit feeling, good operability.
Photo Description]
photo1
When wearing Gloves
. Fingers are naturally bent.
Picture 2
Bulging at the second joint. (Draping)
Picture 3
The adhesion of the rubber part is also firm.
Picture 4
Palm side. no Punch. Sufficient thickness.
Photo 5
Magic tape section. Careful sewing and edge treatment.
Photo 6
Reinforcement at the crotch of the thumb. Overall, the Felt is firm.
View detail
Gradation of Coloring is outstanding!
V1LEAD purchased to match VSTROM1050XT with AIRSPACE Vizen Red.
It was very difficult to obtain because it was sold out even at Webig, but I managed to get it through a private import.
The gradation of the band of this model is also elaborate, and the gradation of the GogglesBody from red to black is very cool.
Dark grayLens is the Standard Equipment for this MODEL.
The Lens is also excellent, and maintains clear vision even at dusk and in the early morning hours, just before the sun rises, except in the middle of the night.
At night, you can use it on a road you know without any problem, but since it is dark gray, you cannot see almost anywhere where the light does not reach, so you may miss animal jumps, gravel, small stones, etc. If you want to use it comfortably all day long, you need light grayLens.
View detail
Roll-offBase is included but not Roll screen
I bought it to go along with fox V1 LEAD which I bought to go along with VSTROM 1050XT.
This one was chosen exclusively for driving in the rain and at night.
This one in Flow red and Light gray as a color with better visibility than other cars also goes well with Helmet.
Only the roll-off system is included, not the roll screen, which is a little disappointing, but even if there was a roll screen, the roll-off mechanism of the screen is too large, and it would be a hindrance to use on public roads because it would take away the side view. I replaced it with my Clear Lexan Lens.
However, Clear is difficult to use at night because of the diffuse reflections of oncoming Headlights and streetlights, so Light gray (Injected Lens) I am considering replacing it with a new one.
View detail
For those of you who find Goggles foggy and depressing.
When you really need to push in the Race, such as in the summer, if you leave the Goggles on, they will fog up quickly due to the heat.
I have to take off the Goggles every time I want to do that and put them back on after fogging them up. Frankly, it's a hassle.
But this product does not fog up!
The two-piece construction of the Lens prevents the Lens from fogging up even in hot weather. It can be washed and used in the same way as ordinary lenses.
If I had to say so, I would say that the price is a little high. But it is reasonable considering the effectiveness of the product.
View detail
First Long Pants for MTB
I bought MTB Long Pants for the first time because it was getting cold + it is a trend in the MTB world + I wanted to prevent injury as much as possible. I was a little worried about the size since I didn't try them on, but they were actually very comfortable and easy to move around in. When I tried them on, they were quite different from those for MX. (There is no leather Patch on the inside of the knee, or there is a Smaller Pocket.) It was a good choice to choose Black, which seems to be quite enduring in terms of design. View detail
Pocket Convenience
Was the one you received as per Image?
Off-roadPants are for competition use, so they do not have a pocket. It is true that you don't need a pocket when racing, but there are times when you want to carry your Cigarette or smartphone during loose practice, course development work, or forest road twos, and I always wished I had Off-roadPants with a pocket.
I was casually looking for this product and found it at a very low price, so I quickly popped it in.
FastHouse's Wear is Quantity:I chose it because I had 1 Set and knew the quality was good.
Another feature of FastHouse's Wear is that it can be combined with the top and bottom RoseRose design, which is another reason why I purchased it.
You can combine the Jersey of Wear you have been using, and if there is a hole in it, you can buy an appropriate Jersey.
[How did you feel about the Fit?
As for the pants, FOX is a 30 and ACERBIS is also a 30, but FastHouse is made Tight, so I wear 32-inches. I chose 32-inches for these as well, and they fit perfectly.
How was your experience with it?
It's wonderful to have a Pocket.
[Was there anything that disappointed you?
Not particularly
What are the specs of the product, such as protector?
It comes with a Pad for upper thighs. I always throw it away as fast as I can. I haven't seen many people using it. I wonder if there are any of those?
How did it compare to other products?
I was not sure about THOR's similar Pants because they have two Pockets, but I decided to go with FastHouse because I had to buy Jersey as well.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
FastHouse is 1Size up is the cheapest option!
View detail
Retro feeling
I use it together with SHOEI's EX-ZERO.
Lens' Silver mirror works fine at night.
On the one hand, I wish I had purchased it earlier because the Helmet Shield would have caught the wind and hit my eyes, but on the other hand, I am very happy because it is an older MODEL and I was able to get it at a lower price.
This Series is also a fun way to find a design you like.
View detail
Might be tough in the harsh winter months.
I bought this for winter use on my bicycle, not Motorcycle.
It is quite warm with a warming Form in the back of the hand.
On the other hand, I liked that the palm portion is made similarly to general Off-roadGloves, so operability is also ensured.
In fact, the Shimano STILever can be operated without any problems.
No problems with BrakeControl either.
I purchased the size S Size, but it may be a little small in size.
One sizeLarge, maybe I should have made it smaller?
If you are able to try them on, we recommend that you try them on before purchasing.
However, when used in the harsh winter months of January and February on a motorcycle, I have the impression that it may be a little difficult unless used in combination with a hand guard or a grip heater.
In fact, when I used it on my motorcycle at night when the outside temperature was 10°C, I had the impression that it cooled my hand considerably.
I think it can be used comfortably if the outside temperature is around 15°C at noon.
One point of concern is the Velcro on the Female side, but I have the impression that the adhesive strength of this type weakens rather quickly, so I will try using it for a winter and observe the progress.
View detail
… to MOTO3.
I bought it on Sale and the quality and design is great! The Barstow looks best with the MOTO3 Helmet. ?? View detail
Added to Rough Parka for a little ride.
It is additionally attached to Rough Parka RR7234.
I think Rough&Road's Jacket would have Standard Equipment or Mounted Space.
The shape of the place where the Parts to be protected (back, shoulders, elbows, chest) are placed is the same.
See Catalogue for details.
I used to share Hard Type RR10074 with RR7001 Gore-TexTrekJacket.
I purchased an addition to my Parka for street riding.
The protection is 4 stars compared to RR10074.
Compared to a full-scale product, the Level is better than nothing.
View detail
It was a little Tight.
Height 185, shoulder width 53, arms 59, chest 108, abdomen 98, length 60
I bought an XXL in
The size feels a little tight on the shoulders and the elbow pad is rubbing on the top. The band around the shoulders can be removed.
I wonder if it will Fit if I put it on and loosen it up?
View detail
That's pretty good.
I like the feel and the way it is made. The price is not as low as other Off-roadManufacturers, but I feel it is more durable than others. View detail
Excellent Fit feeling
The previous Dirtpaw is about to go bad, so we are replacing it.
Just fit。
View detail