Reviews
Fits: HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Too slippery.
Crf250rally50, thank you md44 for your help, I also purchased it for the proper Position
The material of the outer skin is rough non-slip fabric that sticks to the pants like magic tape, so I can't slide my butt on it.
Regular Seat fabric would have been even better.
I have applied Silicon spray as much as I want to help my butt slide, but it still gets stuck.
It is better to replace only the Seat cover.
I like the Seat shape.
View detail
Patience and energy
I am sure it would be a snap to take it out to a store and have it replaced. But they are expensive and people want to do it on the cheap... The product is great. The quality is excellent; it feels like a Yamaha type off car Seat. In fact, this is the second time in my lifetime that I have replaced my Seat with this kind of Seat, and I think that I should change it even for touring purposes because Honda OEM Seats are always slippery. Now, as for the replacement, even an amateur can do it. Without a doubt. However, if you have patience and energy...you can do it if you have a 300 yen Tucker tool from Daso and a Mxx needle. However, it is hard to pull the needle and hit the needle again and again.... View detail
Bolt mounting holes do not line up at all
I installed this on a 97 KLX250ES. Anyway, the Bolt mounting holes are off by about 1 cm.
We managed to force it to stop by pushing it with our force, but it was not good for Seat or Bolt, so we widened the hole a little.
The OEM Seat is also very slippery and surprisingly good, but the distance from the footpeg is too close and my knees are cramped, and it is difficult to operate the brake pedal. It was a good decision to choose Spiral High seat.
View detail
Good functionality, but difficult to install.
No functional problems. Design as expected.
However, the mounting holes, etc. seem to be misaligned.
Is it really for KLX250? I was so skeptical that I was forced to install it.
Is it an individual problem?
The mounting bolt might break someday. Therefore, the quality is 2*.
Otherwise, I'm happy with it
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
The anko might be cheesy.
I bought this to improve Position and change the look of my Motorcycle.
That was perfectly correct.
But the bean jam inside was normal, both good and bad.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
CRF250M footpegSeat installed
To be honest, I was worried about the price until I decided to buy one. I was also worried about whether I should get the high seat or the footpeg seat. The reason why I decided to go with the footpeg seat is because the High seat has a shape that makes the seating position too far back, and also because it just doesn't look good after installation.
This is my impression when I installed it (I am 180m tall and weigh 75g). The seat height has been raised enough. My knees were bent and both feet were sticky, but now my knees are extended and my feet are floating a little more than sticky.
The riding position used to be a bit cramped, but thanks to the extended knees, this has been eliminated a bit.
I don't know how much the seat height is actually increased, but I personally think it became a good feeling. And unlike the Normal seat, the seat doesn't slide back and forth when accelerating or braking, so I can drive with a good feeling.
from now on [Spiral's Seat is hard. But I don't care that much about it. It's just a personal subjective feeling, so it's different for each individual, but I think it's just right for me.
Honestly, if you're worried about the price, I think you should buy it. No, I get it...you're paying 30,000 for a….
The satisfaction after installation is also high, and the custom look is increased when the Seat is replaced. You'll be noticed. I think. I think it is more effective than the fancy Stickers.
View detail
I'm glad I bought it
I'm personally glad I bought it because the Seat's anko is quite thick and my butt is hardly sore and the balance between the body and Seat is good.
It's just a bit of a pain to install.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
This Seat is for Off-roadMOTARD!
We are the inimitable MotocrossMOTARDFreak.
I've installed Spiral's High seat in all of the vehicles I've owned of that type, so there's no doubt about the performance anymore!
The fit is not right for some reason only for 2012 crf250l.
Well, I didn't mind too much because I'm performance oriented.
View detail
Seat GripUp
Motive for purchasing
As the OEMSeat was torn, I thought if I was going to replace it anyway, I would use Other Brand Select this product from Product I decided to try it out by looking at the images and the description of the material, which seems to have a high grip I did
About the product
If you don't have confidence in the reupholstery process, you should ask the Shop for help
I was able to borrow a Tucker to reupholster the seat, so I did it myself I saw it I managed to spend an hour or so with the help of a buddy who has done the re-upholstery many times The reupholstery was done I thought it was a waste to reupholster it as it was because I took off Seat I decided to stock a waterproof cover together to protect the inside from water
It's not exclusive to this product, but it takes a certain amount of time to replace Seat with Beauty I felt I needed experience and a hang, and if the Seat cover itself is inexpensive and fails, I'll buy it again If you can, you can try it yourself, but this product isn't that cheap, so you'll have to reupholster it If you're not confident, it's less expensive later on if you ask the Shop to do it honestly
Non-slip surface finish is excellent
When I had a normal seat, the seat slipped on the Seat when it was full breaking But after I replaced it with this Seat, I can support my body firmly Thanks to the non-slip surface, the bottom half of my body is held firmly in place I personally like it better than the design of the OEMSeat It is
How is this price for CoverSingle Body?
If it's SeatBody, but this product is only available as a Seat Cover So, I think that the selling price is about 9,000 yen, a little bit of bad cosmetic You may not have to replace it with this Seat if you do not have particular care
View detail
Mounting on a friend's WR 250 R
A friend asked me to purchase & install the proxy.
I used it also for my CRF 250L
quality ? Texture confirmed.
Logo's Rubber Edge was Blue. Because CRF was Red ...
Maybe the color is different for each Manufacturer?
Regarding installation, I have been going through many times and have been experienced
Although I'd like to say that there is no problem ...
It is not a problem of goods, the undulations of the back of Seat of WR are intense
I could not stop it well with Tucker on hand
View detail
Low seat
The texture looks good and the footstep is not as good as Cool expected. Seat It may be good as an exchange of tears but it is subtle as an improvement of foot. View detail
Good stuff
It is slightly lower and the width is wider as described. So the footstep is not amazing improvement, but there is a little sense of security. Butt pain is somewhat good. I feel that the texture of Seat cover is rather rather OEM. Mark is Blue, is not it Point. View detail