Reviews
[Vehicle type] Since the pure rubber mount was distorted and sense of incongruity was felt for the handle when a DR-Z400SM [buying motive] fall was carried out, while considering the exchange to an external article, it got to know that the lineup was carr
[Vehicle type] Since the pure rubber mount was distorted and sense of incongruity was felt for the handle when a DR-Z400SM [buying motive] fall was carried out, while considering the exchange to an external article, it got to know that the lineup was carried out to ZETA, and decided on purchase.
[Clearing work] Before removing a handle, it was very as easy as attaching by the procedure and reverse order which removed the nut under a top bridge, and exchanged and removed the pure rubber mount and the rubber killer after handle removal.
[Comment] It is the touch which gives the information from a road surface at a direct to a handle unlike a pure rubber mount, and is very good.
However, since I think whether it is good to attach a thicker grip and heavier bar end since the jitter of a handle will increase, please try once.
View detail
Since the attached bar end of the product made from a plastic was cheaper when the handle of Ninja 250R was changed to the sports handle of PENSKE, while searching with whether there is nothing good in anything, this bar weight stood out. O Good place
Since the attached bar end of the product made from a plastic was cheaper when the handle of Ninja 250R was changed to the sports handle of PENSKE, while searching with whether there is nothing good in anything, this bar weight stood out.
O Good place O1 If grip end has separated, it can equip really easily.
(if there is only a 6 angle wrench) The vibration from about 2 80 K was eased.
3 Correspond to both 14 mm in inside diameter, and 18 mm.
4 The pure twist is also self-asserted nonchalantly and is good.
5 Weight has become comparatively for 2 minutes and is made to a favorite weight.
O Not quite satisfactory place O1 There is no color suitable for the car body of lime green.
(Although gold was used, by itself, it is pleasing) 2 It is the highest when cheap to a slight degree.
3 I wish and I can choose what of a portion is big to a slight degree.
Since it just strains itself and searched although the not quite satisfactory point was also got, overall points are satisfying parts of about 95 points.
View detail
Fits: YAMAHA RZ50, HONDA NSR50, YAMAHA TZR50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NS-1, YAMAHA XJR400, HONDA NSR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
In play was seen and it resulted in purchase. After attaching, an operation becomes light and it becomes easy to adjust!! I think that I lubricate periodically and will maintain the engine performance.
In play was seen and it resulted in purchase.
After attaching, an operation becomes light and it becomes easy to adjust!! I think that I lubricate periodically and will maintain the engine performance.
View detail
Fits: YAMAHA RZ50, HONDA NSR50, YAMAHA TZR50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NS-1, YAMAHA XJR400, HONDA NSR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
Since that authentic positive adjusted and ran away, he bought the black of the clutch adjuster. It is [ that it is easy to turn a lock nut by twice ] dramatically good. Another reason for purchase is that authentic positive put in the crack and n
Since that authentic positive adjusted and ran away, he bought the black of the clutch adjuster.
It is [ that it is easy to turn a lock nut by twice ] dramatically good.
Another reason for purchase is that authentic positive put in the crack and not good [ that / appearance ] on the occasion of adjustment.
Although it is small, a feeling of a dress-up up carries out.
View detail
The [circumstances] It introduced with full maintenance of its own car. Although the thing to off vehicle characteristics was a lever holder rotating at the time of a fall, etc., and preventing a lever crease as commodity characteristics in the clamp
The [circumstances] It introduced with full maintenance of its own car.
Although the thing to off vehicle characteristics was a lever holder rotating at the time of a fall, etc., and preventing a lever crease as commodity characteristics in the clamp inner side by arrangement about the nylon sleeve,
It has chosen by lowbrow [ of appearance ] purely... A degree of satisfaction raises the texture of [comment] appearance, an amorous glance, etc. too.
Since the clutch side was also already equipped with the type with a mirror hall, a feeling of unification of the circumference of a handle is also good.
Since the reserver cover of the front is incidentally also packed in the same color, if other things are united, admiration called ZETA Isshiki is just ..., and it is dramatically satisfactory individually, but.
Although it is that it may be common for the anodized aluminum products of ZETA, the place where surface durability is quite weak is felt.
If the cord which equipped and came off under the bolt immediately although it turned out that it will come off if it rubs by honesty, a bolt, or a tool is found ... Does it become somewhat sad?
If such portions are improved more, it will become a cinch by a five stars.
Although I think that this unit price is up to persons to the parts such delicate techniques were effective, since there is also a degree of satisfaction more than enough although the impression a little high ? is also held, a recommend can be carried out also in the portion of practicality +alpha to refresh the circumference of a handle.
View detail
It did not use as temp meter stay, but the clock of the rectangular form was stuck with double-stick tape, and it has attached to the handle. Such stay is flexible and I think that it can use for various uses.
It did not use as temp meter stay, but the clock of the rectangular form was stuck with double-stick tape, and it has attached to the handle.
Such stay is flexible and I think that it can use for various uses.
View detail
V-MAX was equipped in accordance with grip exchange. In free bar end, since it was dull, the weight type was looked for for the purpose of oscillating mitigation, but the reason decided to be this is because it can use for both aluminum and iron.
V-MAX was equipped in accordance with grip exchange.
In free bar end, since it was dull, the weight type was looked for for the purpose of oscillating mitigation, but the reason decided to be this is because it can use for both aluminum and iron.
And I also think that setting-out weight is heavier than the equivalent product of the other company, and the charm of this product can adjust three patterns to its favorite weight since it is a division type.
Although it is an effect of a product, it is thought that vibration in a low rotation region (about 3000 rpm) is decreasing.
Since the grip is also simultaneously changed into the thing containing a gel, it is not in play [ exact ], but I think that it is effective.
however, there is no effect until it denies thoroughly to the fine vibration at the time of vibration and idling of high rotation too as a reason for five stars not coming out.
I think that a single engine and a vehicle type with much vibration like 2st can be felt more.
But it is very well pleasing not only an effect but in design as me.
View detail
Fits: YAMAHA RZ50, HONDA NSR50, YAMAHA TZR50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NS-1, YAMAHA XJR400, HONDA NSR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
Fine adjustment of a clutch lever can be performed simply, without using a tool. I think that what would use the tool until now. Appearance is also very good. Although it is small components, he has a feeling which is very scrupulous and is ma
Fine adjustment of a clutch lever can be performed simply, without using a tool.
I think that what would use the tool until now.
Appearance is also very good.
Although it is small components, he has a feeling which is very scrupulous and is made.
Silver is recommended.
View detail
When searching in order to process it into the throttle wire of a mesh by oneself at any cost, this product was found by chance. [ preparations ] Although attached to the wire of TM38 before, however it may bind tight, it has separated in the heavy ha
When searching in order to process it into the throttle wire of a mesh by oneself at any cost, this product was found by chance. [ preparations ]
Although attached to the wire of TM38 before, however it may bind tight, it has separated in the heavy hard throttle wire.
In the present TMR40, since it became light by the favor of the bearing, it has not separated once.
It cannot attach, unless a hole cuts a wire firmly small.
I think that sudden trouble can also be coped with by old motorcycle if it has several pieces since cutting of a sudden wire is dreadful.
Although it does not have undue importance that a hezagonal wrench arrives at a time at one piece, they are very easy-to-use goods.
View detail
Fits: HONDA CRF450X, HONDA CRF450L, HONDA CRF450RX, HONDA CRF450R, HONDA CRF250R, HONDA CR250R, HONDA CR125R
If it falls, the direction of a handle may sometimes bend to a tire, but if the cause is a twist of a handle clamp, you have to carry out and correct a tool. If this product is attached, and that twist can be prevented and it will be released from cor
If it falls, the direction of a handle may sometimes bend to a tire, but if the cause is a twist of a handle clamp, you have to carry out and correct a tool.
If this product is attached, and that twist can be prevented and it will be released from correction was thought, and it purchased.
The effect will be expected from now on.
View detail
The ape which carried out bore up to 125 cc was equipped. Since bore up was carried out, also in the idling condition, vibration is severe and the mirror always blurred, and in the run, it was like [ into which the stay of a blinker breaks with vibrat
The ape which carried out bore up to 125 cc was equipped.
Since bore up was carried out, also in the idling condition, vibration is severe and the mirror always blurred, and in the run, it was like [ into which the stay of a blinker breaks with vibration ].
It stopped almost worrying the vibration in the time of idling, after equipping with bar weight.
A little oscillating buffering effect under run is called kana ? which became Massey.
Since it became a dress-up up in addition to an oscillating buffer, it was a case of killing two birds with one stone.
It will be easy to equip, if grease etc. are applied to a ring about wearing since a rubber ring may be unable to enter easily depending on a handle.
Since it was the goods as expected, it is a five stars.
View detail
It purchased simultaneously with Hardy's road bar currently used for XJR1300. Although the bar end currently attached to the pure handle was removed at the time of handle exchange, pure bar end also has a weight very well, and there was weight to the
It purchased simultaneously with Hardy's road bar currently used for XJR1300.
Although the bar end currently attached to the pure handle was removed at the time of handle exchange, pure bar end also has a weight very well, and there was weight to the extent that it is not different from this product.
I think that an effect does not show up since heaviness does not so much change even if it exchanges for pure bar end with a normal handle.
I think this time that the parts as for which an external handle is made to the same conditions as a pure handle will be places if it sees in a weight since it is attachment to Hardy's road bar.
Since the quantity of weight was changed, all the patterns were tried, but since a difference is not known well, it has attached now [ all ].
Those who worry about the external handle at the numbness of the hand by vibration think that the way purchased after weighing the bar end of normal, when it attached to a normal handle, although I thought that they were parts which are worth trying does not go wrong.
View detail
Since the pure rubber mount of DR-Z400SM was not pleasing, it exchanged. O x whose feel at the time of - steering good whose point and road surface information increased which is twisted was lost -- impact which was being absorbed because a rubber mou
Since the pure rubber mount of DR-Z400SM was not pleasing, it exchanged.
O x whose feel at the time of - steering good whose point and road surface information increased which is twisted was lost -- impact which was being absorbed because a rubber mount shifts at the time of - fall bad whose point and vibration increased Since it has not fallen the place which is Kon who may come to a direct rubber killer or a car body, fall tolerance is an unknown, but.
Handling became a quite favorite thing.
When fall tolerance is low, that it is also changes the whole top bridge.
View detail
It is required when the brake master is changed. It pulled forcibly, felt and came out and was not able to equip with an armor handguard easily. Although it stops interfering in a brake master, it may interfere thoroughly. Because the hand gua
It is required when the brake master is changed.
It pulled forcibly, felt and came out and was not able to equip with an armor handguard easily.
Although it stops interfering in a brake master, it may interfere thoroughly.
Because the hand guard was smart, I wanted consideration of this neighborhood to a slight degree.
View detail
It purchases in order to attach the oklahoma bush guard of UFO to WR250X. The guard of UFO purchases this product in order for the guard itself and FR master cylinder to interfere and not to cling, if attached parts are used. And as measured, it w
It purchases in order to attach the oklahoma bush guard of UFO to WR250X.
The guard of UFO purchases this product in order for the guard itself and FR master cylinder to interfere and not to cling, if attached parts are used.
And as measured, it was attached finely.
View detail
[Buying motive] - book products are the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to mi
[Buying motive] - book products are the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to miss a shock,
Since it had written to the package Some vehicles can be used also for the clutch side, the clutch side brake lever clamps and the mirror clamp of KLX250 (07) were exchanged.
[Attachment] - mirror clamp only exchanged only clamps using the pure bolt.
- Since this product of a brake lever clamp was thick in a pure plus screw (M5x14) and it was not able to attach, separately, the two same bolts (M5x20) as a mirror clamp were purchased, and have been attached.
[Others] Although the ZETA:JITA rotating bar clump (with a mirror hall) sells - mirror clamp at another article,
Since the height of a mirror on either side stopped having suited even if a mirror hall did not suit M8 of the kawasaki vehicle and used M10 ->M8 adapters, since ten [ M ], it was taken as means with this product. [ this ]
(Probably, (08) users may use this product, since the mirror hall from (08) is incidentally M10 also KLX250) It is [grading of goods], and what is ordinarily good.
It is a three stars.
View detail
[Buying motive] Although it is the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to miss a
[Buying motive] Although it is the goods of arranging a nylon sleeve to a clamp inner side, and reducing fixation for a positive handle, and the risk of lever breakage in order for a brake lever holder to rotate at the time of a sudden fall and to miss a shock, - book product,
Since I have attached the armor handguard of ZETA to KLX250 (07), there are no worries about breakage of a lever.
Moreover, since a mirror is removed through an off-road course, there are no worries about breakage.
This product was purchased for prevention of the mirror breakage by fall on the path through a wood it runs attaching a mirror uniquely.
[Attachment] It only exchanges for a - authentic positive brake holder clamp.
[Others] Since it had written to - package Some vehicles can be used also for the clutch side, it checked, but although the brake lever clamp and the mirror clamp of the clutch side were different bodies, it turned out that both can use this product.
However, since the clamp circumferences, such as a diameter of a screw of a mirror (M8->M10), have been changed about 08, since it is the check by KLX250 (07), it can say that KLX250 (-07) and D tiger (-07) are OK, but is it unreasonableness?
[grading of goods] - it is ordinarily good.
It is a three stars.
View detail
Bar end was exchanged to compensate for having exchanged handles. Since it was disagreeable that a hand was numbed with vibration of a handle, it equipped with the bar end of Hardy who states the earthquake-proof buffer. It has equipped with weigh
Bar end was exchanged to compensate for having exchanged handles.
Since it was disagreeable that a hand was numbed with vibration of a handle, it equipped with the bar end of Hardy who states the earthquake-proof buffer.
It has equipped with weight with the composition of the heaviest state (161g) of No. 1 of the catalogue which also has this in Mr. Webike's goods page for earthquake-proof.
From the first, although it is a motorcycle with little vibration, there is also no vibration and a hand is not numbed at all.
Although I thought that there was also a cause of anteversion at a little time of a pure handle, the hand might be numbed, but there is also no numbness of a hand, there is also a cause of an up handle, and it is dramatically comfortable.
I think that vibration is decreasing at least more certainly than pure bar end since a hand was not still numbed after attaching this bar end.
Whether it is good how and when [ although weight is not understood, ] it is me, it is satisfactorily good also to management also in the present heaviest state.
View detail
Although it is a factory FX grip doughnut, a design is also good, a price is also reasonable and they are one point items which have practicality, such as MAME prevention, and yet.
Although it is a factory FX grip doughnut, a design is also good, a price is also reasonable and they are one point items which have practicality, such as MAME prevention, and yet. View detail
Since the handle clamp of w650 is an inch design, its width of a handle for exclusive use is also narrow, and when there is no favorite handle, the parts here play an active part. He actually equipped with the forward conti of 22.2 pies. For the m
Since the handle clamp of w650 is an inch design, its width of a handle for exclusive use is also narrow, and when there is no favorite handle, the parts here play an active part.
He actually equipped with the forward conti of 22.2 pies.
For the moment, there is no gap and it is relieved.
Since it was required for the clamp part and the switch part, two sets were purchased.
The width of handle selection spreads and they are cheap and convenient parts.
View detail