Reviews
I don't know.
I don't know because I haven't tested the difference by replacing it with another Weight.
To the Handlebar, the coming seismic intensity has been reduced by a Large amount.
View detail
Bar End for Steel handle
Prepared to install HURRICANE FATCondor.
I have only driven about 150 km but I didn't feel any numbness or vibration, so I think it's good.
View detail
Installed on XSR125.
I installed a Comfort Handlebar and Post to improve my riding posture, but the OEM Cable was not long enough. View detail
Recommended for those who are concerned about stopping posture when using Lowdown Link!
I installed a Y's Gear Lowdown Link when I purchased the vehicle, but when parking Standing still. I was always concerned about the posture of the
I was considering modifying the OEMSide Stand, and when I saw a post on Impreza about a person who had similar problems that were improved by installing this product, I immediately purchased it.
Installation is also easy if you are confident in your arm strength.
After installation, I feel very secure when parking the car.
The precision of the product is comparable to OEMParts and is not different at all.
I would recommend it to anyone with similar problems.
View detail
If only it were a little cheaper….
Specialized tools are required for installation.
It is expensive, although it is unavoidable because a certain amount of Cost is necessary to ensure safety.
Short processed Side Stand could be a little shorter.
The stability provided by the improved footing is satisfactory.
View detail
Great!
Thank you very much, the part fit perfectly. All the holes are in their places. Unfortunately, there are no internal threads at the ends to install original weights, they will need to be ordered additionally I installed the ones that came with the mirrors View detail
Fits: HONDA CB300R, HONDA CB150R, HONDA Monkey125 (MONKEY125), HONDA GROM (Grom 125), HONDA CB125R, HONDA CBR250R, HONDA CB250R
Lever Replacement
A little cheap. It feels uncomfortable when your finger hits the inner groove. View detail
The color is perfect with Front fork.
It is good to get Normal position. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
easy to grasp
Good texture and satisfactory as far as appearance.
The performance was easier to grab, but the original Lever was farther away, so it was made somewhat easier to grab by moving it closer to the first.
It would be easier to grasp if it could be made closer or if the bend was closer to the hand side.
Installation is easy with tools.
View detail
Easy to install
I had installed DAYTONA's Bar End, but the Bar End was too large and too conspicuous, so I replaced it with these parts including vibration reduction. The outside of the bar end is small and looks good. I feel that the vibration is slightly reduced. My vehicle is Material:I was not sure whether it was better to use a Stainless Steel Handlebar or an Aluminum Handlebar, but I chose the one for the Steel Handlebar for now. View detail
Good to have a sense of individuality in appearance.
Because of my short stature, my shoulders and back ache when I go long distances for long periods of time,
Quantity at stop:Pair (for Left and Right) It was difficult to check, so I bought it to try it out.
I'm happy with the look and feel more comfortable with more room in my elbows.
The company's Bar End and Quantity:Set exchange, handling also changes.
I look forward to seeing if the discomfort in Corner will go away with familiarity and riding style.
View detail
It works, but …??
It is effective, but it seems like the Gel should be a little thicker. View detail
Great bar for the price!
Great replacement for many naked original equipment,excellent upgrade, aluminum tubing much thicker than stock steel, Great bars and a good price.I like the rise and the bend, standard so no need to modify my clamps or add risers. Light and strong aluminum make for a great set of bars.Best handlebar I have found.Put the black high bend on my 13 mt09.Just need to drill the hole for the throttle mount so it doesn't rotate. Easy to do, just mark and drill.Couple inches wider than stock and a little taller.Thanks for the fast shipping and careful packaging. The only downside is that the shipping costs are very high.The economic shipping is no longer available. View detail
EZ-FIT Bar Low Installed on my 2022 SV650
About quality and texture: Feels OEM. The hole for securing the throttle fits perfectly. About the feeling of use: A little lower than the stock. It has a graduation scale to adjust the foward or back angle. Made my riding style a little more aggressive by going more foward. Difficulty of installation: 2/5. Suzuki Sv650 is very easy. Since it doesn't have too much tech, removing and replacing the cables and switches are easy. About shipping and packaging: Securely shipped with packing materials to the Philippines. Any concerns, cautions, or advice when purchasing: None! If you want to change your handle bar to a more lower profile go for this! View detail
It's not bad
[How is it used?
V-string feels higher in adaptive height. Due to posture change.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's not difficult as it's just a matter of replacing it. It is tedious, though.
How was your experience with it?
The same series I bought before had the hole positioned perfectly, but it was gapped by about 1cm, perhaps due to individual differences.
It's not hard to deal with, but if you don't have the tools, you may despair.
[Was there anything that disappointed you?
Since Handlebar is sold with pre-machined mounting holes, I thought it would be meaningless if the holes were gapped.
I think the Handlebar itself has a good texture and shape.
So far I've won one and lost one, so if I try it next time and the hole is Gap, I won't buy it again.
View detail
Too bad it didn't go in.
I wanted to attach it to the EZ-FIT TAPER BAR of the same manufacturerEFFEX, but it could not be attached because the rubber inside was too thick or it did not fit deep enough. I thought that I could attach it to the EZ-FIT TAPER BAR of the same EFFEX manufacturer, but it could not be attached. View detail
This is a good one!
I bought it because the one I had on two years ago was getting ragged.
I used to put it on with a Gas burner to burn it at a distance, but I still prefer Heat gun.
Dryer would have to be very powerful to make it work.
I use it to prevent deterioration of the Grip heater from UV rays and to reduce vibration of the Handlebar.
When I ride my Motorcycle in the middle of winter, I use light gloves because I am a Grich + Cover.
Even in that case, many are more than warm enough to both protect and warm the grich!
View detail
Installed with Lowdown Kit
[How is it used?
When we decided to lower the CBR1000RR-R, the OEM side stand would cause the vehicle to stand up too much when the vehicle comes to a stop. The short side stand was introduced because the side stand needs to be shortened to accommodate the lowered body.
Was the installation difficult?
I asked Motorcycle shop to install it because it was replaced at the same time as a Lowdown Kit made by another company.
How was your experience with it?
It has been about a month since the replacement and no problems at all.
The car body is at just the right angle without standing up too much or lying down too much.
View detail
Handlebar weight installed on both MT07EZ-FIT Bar. It works well!
The OEM Handlebar had vibration, which I thought was normal, but when I installed the Handlebar weight on the EZ-FIT Bar and drove, I realized how little vibration was transmitted to the Handlebar. View detail
Bar Weight
I installed it together with a Handlebar of the same manufacturer. The vibration to the handlebar was also reduced. I also installed the same manufacturer's Lever at the same time. The only regret is the color, I wish there was a normal gold color instead of Champagne gold, View detail