Reviews
I tried to paste it for the time being
I think this Tank Pad, Design is nice.
However, due to Material, I feel almost no function as a slip stop when I grip Knee. It is a little disappointing that Design is nice. It is helpful for Large to prevent scratches. I think that it is a good thing if it does not place emphasis on anti-slip function.
View detail
I can not Recommendation except Style-focused
I got installed at ysp when purchasing a vehicle. Design thinks that it fits MT - 09, but there is no windshield at all. It was completely decorative, and it was not useful at all when driving at high speed. I changed to MRARACING now. View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Very good! I wish I had it from the beginning!
MT-09 's OEMBlinker was influenced by CostCut, it was a very lively design, I was concerned from the beginning of purchase. Although I was considering purchasing the Other Company Product including overseas Parts, I also thought that this Blinker made by Y's Gear, which is OEMOption Parts, is the most design-friendly, so I bought it.
Although it was not complicated in design, it seems that visibility is also good unexpectedly (It is a story from a touring fellow). Because it is a very good product, I think that there is no loss by buying.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Good design, good light intensity
I tried to change from Valve of OEM Product to LED.
Size is quite small compared to OEM but visibility is
I think there is no problem.
We only replaced Front this time, but Rear is Fender less
I will install it after replacing.
As Relay remains as an OEM, it has caught the attached resistance.
Wiring is hidden inside the Cowl, but the resistance Size is
Because it is fairly Large, it would be nice to have a little Small,
I think.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
Regulator end wires are too short to install. Perhaps, must cut the regulator and attach wires directly or obtain another regulator to install properly!? Have not installed yet. Regulators seem to get very hot so placement of regulators on the bike will b
Regulator end wires are too short to install. Perhaps, must cut the regulator and attach wires directly or obtain another regulator to install properly!? Have not installed yet. Regulators seem to get very hot so placement of regulators on the bike will be very important. To attach these, I might need to take my bike to the shop!? View detail
MRA Racing Screen was back ordered so I canceled it and got this one instead. Well, I was looking at this first. It's a bit smaller (shorter) than I thought but it seems to do its job. I wanted something that could help eliminating some wind drag on h
MRA Racing Screen was back ordered so I canceled it and got this one instead. Well, I was looking at this first. It's a bit smaller (shorter) than I thought but it seems to do its job. I wanted something that could help eliminating some wind drag on highway. They do look good as well. It does not look bulky and seems to harmonize with the front contour. View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA Applicable to 12V 10W only, YAMAHA MT-09, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA XSR125
I replaced my front blinker to YSGEAR(YAMAHA) LED blinker.It is quite small compared to the original product.I was worried about its light quantity at first, but it seems it is light enough when you see it from its front. Cars can detect you all r
I replaced my front blinker to YSGEAR(YAMAHA) LED blinker.
It is quite small compared to the original product.
I was worried about its light quantity at first, but it seems it is light enough when you see it from its front. Cars can detect you all right. Still, I noticed that its visibility level drops when the angle changes a bit. I doubt it could be seen from a car whose driver's seat is at a high position.
It comes with a bracket to fill the resistance hole or the cowl side hole. So all you need is a conversion cable to switch from the OEM connector (I used DAYTONA one).
The front side installation is easy.
It said to be careful because the resistance was going to be hot. So I used a cable tie to float it inside the cowl and fixed it, while making sure not to let it touch other cables.
Though the blinker and hazard system seems to be working all right, I will place 4 stars for it was a little smaller than what I had expected.
View detail
Well received and nicely packaged. I love the look. Blend well into the bike's shape. Fitting was easy with included instruction. Sturdy enough and didn't vibrate.
Well received and nicely packaged. I love the look. Blend well into the bike's shape. Fitting was easy with included instruction. Sturdy enough and didn't vibrate. View detail
Received in original packaging. Easy to install, just follow the instruction. I think it would be much easier if the tank pad come with pre-configured arrangement as according to bike's tank, as it meant for specific bike.
Received in original packaging. Easy to install, just follow the instruction. I think it would be much easier if the tank pad come with pre-configured arrangement as according to bike's tank, as it meant for specific bike. View detail
EDesignBecause of OEM product, it matches with the body comfortably. Compared to the aftermarket product which emphasizes design, it is suitable for practical use because of covering the base of a mirror, etc. widely.EWearabilityCompared
EDesign
Because of OEM product, it matches with the body comfortably. Compared to the aftermarket product which emphasizes design, it is suitable for practical use because of covering the base of a mirror, etc. widely.
EWearability
Compared to the riding the motorcycle without the windshield on the highways like the metropolitan expressway, I could feel the effectiveness sufficiently. For long-distance touring or touring for several days, it will be effective steadily. It looks big at first sight but it will suit you if you used to ride the motorcycle equipped with a cowl. (As well as me.) The position of the key is unique, but there is no problem for the locking and unlocking even if it has been attached.
ECaution
The mounting way is not difficult. As for the one side of the bracket of the body mounted parts, the fixing bolt which stops the fork bracket is used. Because it is a part which influences the operativeness, I recommend to ask a pro shop to install it if you don't have a torque wrench.
View detail
Good quality of carbon fibre with excellent finish. Fit perfectly nice on my bike, A really nice accessory to protect your yoke for begin scratch, fast delivery service with tracking, only took 3-4days to Singapore.
Good quality of carbon fibre with excellent finish. Fit perfectly nice on my bike, A really nice accessory to protect your yoke for begin scratch, fast delivery service with tracking, only took 3-4days to Singapore. View detail
Good quality, easy to self install, fast delivery for international shipping, the best thing is buy over 30,000yen have free shipping!
Good quality, easy to self install, fast delivery for international shipping, the best thing is buy over 30,000yen have free shipping! View detail
It cared about sticking for a while. It will become wrinkles, if it brings near by an angle or unreasonableness since it is fairly soft.
It cared about sticking for a while. It will become wrinkles, if it brings near by an angle or unreasonableness since it is fairly soft. View detail