Reviews
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Ideal for fall prevention
The product is good, but WeBig's shipping is good and very good.
Companies A and R are slow to purchase from inventory and are not counted on.
View detail
I am more then satisfied with the positive and direct feel now felt when changing through the gears
About quality and texture - The shift guide from G-Craft uses a sealed bearing unit and is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the overall feel of the original setup for the gear shifting as it felt vague. The transformation with the simple addition of this shift guide is amazing and I am more then satisfied with the positive and direct feel now felt when changing through the gears. Products to buy together - A product to purchase that will also ad in improved gear shifting is an adjustable shift rod that will allow you to perfectly position the gear lever to your desired position using the rest of the original rearsets. Difficulty of installation - The installation of the shift guide is a intermediate task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the shift guide over the shifter shaft to the engine case. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for but this is not the case with the shift guide as there are quite a few cheaper options available here on Webike. About shipping and packaging - With there being no cost difference between sea freight and EMS for the shift guide, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The transformation with the simple addition this rear master cap is amazing
About quality and texture - The rear master cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I was unimpressed with the over look of the original rear brake master cylinder reservior tank with all it's plastic finishes. The transformation with the simple addition this rear master cap is amazing and I am more then satisfied with the new look. Products to buy together - A product to purchase to add a more attractive appearance to the Monkey 125 cockpit area would have to be a master cap for the front but sadly G-Craft do not have a matching product available but luckly Webike have other silver anodized options to choose from. Difficulty of installation - The installation of the rear master cap is a simple task that took 0.1 an hour to complete. Common sense and the use of your hands is all that is required to screw the cap onto the reservior tank. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the rear master cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The service hole cap offers an attractive yet practical design
About quality and texture - The service hole cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The service hole cap offers an attractive yet practical design and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the finned camshaft cover from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the service hole cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to service hole cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the service hole cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The engine cap offers an attractive appearance
About quality and texture - The engine cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The engine cap offers an attractive appearance and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the clutch cover plate from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the engine cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to engine cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the engine cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
My friend said I should change it because Parenthesis is bad, so I changed it ?????
I was not so interested in the dress-up because I thought that motorcycles are wonderful vehicles that stimulate our five senses, but my friend said that it would definitely be better for parenthesis if I changed the dress-up. I didn't feel much when I looked at it from the side, but when I looked at it from behind, "Whoa, Parenthesis is good." The slightly thicker MONKEY Rear tire looks good and pretty. View detail
Great item!! Highly recommend
This item is durable and well worth it. The carpet is thick and heavy duty. Perfect to use to display the bike at shows. Really vibrant colors that pop View detail
To CHALY's Custom!
CHALY This is the Rear Sets of the "Rear Sets"! The price is a little high, but the look and performance are perfect! View detail
Surprisingly good ?????
I'm not really interested in dress-up, and my theme was to keep the NORMAL cuteness as much as possible, but my friend told me that the tongue in the back is Parenthesis bad. View detail
shift guide
It is also installed on the ct125A (Korean model) model without any problems. Before installation, the connection felt slightly distant when shifting gears, but after installation, the feeling of direct connection has improved. You can experience a luxurious experience at a relatively reasonable price. As for the installation difficulty... It's not difficult to remove the engine guard, remove the four bolts at the bottom, and create space. If you refer to YouTube, it's not difficult. View detail
Certainly tightly
The one I bought before didn't fit jc92 and I used to change only the LINK.
I bought this for my jc92 and was able to install it with no problems.
I feel like Motorcycle on a top ranking.
Can be changed with Snap
I just wish the price was a little nicer.
View detail
Product # 31159
The part was purchased for the Honda Monkey. We continue to change our appearance. This time, the turn came to the steering wheel mounting bar. We definitely use parts only from proven and high-quality manufacturers. As a result, the item turned out to be of high quality and with excellent appearance, our expectations were confirmed. There were no problems with the installation. We definitely recommend it. View detail
Impressive looking addition and serves the purpose to add additional cooling to the 2 valve head
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all silver anodized coating. About the feeling of use, The billet tappet cover set is an impressive looking addition and serves the purpose to add additional cooling to the 2 valve head. Products to buy together, Other high quality parts to help improve the look of other original plain looking parts like the generator plug set would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the billet tappet cover set for my installation was very easy due to the ease of access and simple nature of securing the covers onto the head using just an allen key. Cost performance and comparison with other products, The pricing of the product is high. I ordered an intake and exhaust cover so receive a set of covers made from a high quality material with a matching finish. There are not many options available for the JC92 model and are all priced the same just styled differently. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Neat cam cover
Quality piece from Gcraft, easy to install without oil spill. Remember to reuse back the rubber seal before installation. View detail
Shim for M10Bolt is ideal for Caliper
This is a 0.5mm thick iron shim.
0.Since it is only 5mm, it is difficult to use it as a Washer unless it is a very special Bolt (e.g., Shim O.D. and Bolt O.D. under the neck are the same).
So what kind of use is it for?
The reason for this is that the caliper is offset by putting it in the mounting surface of the axial caliper.
Exactly for adjustment to bring Opposite Caliper to Center against Center of disc.
Almost all axial Calipers use the M10Bolt, so it should work for most car models.
There is no need for Opposite Caliper to be in the Center of the disc in the first place (Piston's output is Quantity).:Pair (for Left and Right) In addition, it is unlikely that the gap between the disc braking surface and the inner surface of the caliper will be so large that the disc braking surface contacts the inner surface of the caliper, so it is basically a self-satisfying part.
But... there are vehicles that actually Gap to the verge of contact...
In the case of my car, Yamaha TDM900, for some reason, the Right Side has a 3mm gap at the center, and I have adjusted it by adding 3mm thick extra-thick shims.
The other car, a Ducati 900SL, is a Large sturdy car...or so I thought...but it's not...it's a Quantity!:Pair (for Left and Right) Both are at 1.5mmGap.
I haven't changed anything or cut any part of the OEM in either case.
Limit contact is not made, so there is no problem to use it as it is, but I don't feel good, so I adjusted it with this Shim.
From the outside, though, you can't tell anything.
The Merit that Caliper gets from coming to the Center is besides feeling good. BrakeTouch gets better." There are also.
In theory, BrakeTouch should not change just because Caliper comes to Center, but the change can be felt quite clearly.
ProbablyQuantity:Pair (for Left and Right) I guess the Fee Ring will change for the better by aligning the amount of Caliper piston that is popping out at the
I can only assume so.
View detail
Certainly chunky.
Replaced with KITACO Shift link.
Shift's difficulty in getting in has been reduced and it is now firmly in place.
Installation is less difficult, but the location is a bit of a hassle.
View detail
A light weight seat due to it's low profile and the narrow
About quality and texture, I can confirm that the quality is great and that the material used is a black synthetic leather with a black stitching to create a tuck and roll design for a custom looking Monkey. About the feeling of use, A light weight seat due to it's low profile and the narrow design. Coming in at 1385 grams compared to the original seat weighing in at 2590 grams. Products to buy together, Since this seat is a lower profile design then original it would be ideal to add a lower set of handle bars to your cart to be able to position your upper body lower to match the seat for the most comfortable riding position. Difficulty of installation, I can say the fitment of the seat for my installation was very easy due to the simple nature of the manufacturers mounting of the original seat which translates to how this seat also mounts. Cost performance and comparison with other products, Pricing of this product is great. You receive a beautifully designed seat made from great quality materials. More expensive then the same designed seat from Kitaco. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Monkey 125 G Craft rear Carrier Type 2
Got the item fast. Listed shipping within 3 weeks. got it less than the said date. Very Nicely Made heavy duty. Very Satisfied. Easy to install. View detail
Even at 20mm, Riding Position can be improved considerably.
A 20mm Up can be attached without extending the wireetc.
Position-wise, even 20mm can vary a lot. (This is my personal opinion.)
Top Bridge*The gap with the Other Brand Product (TAKEGAWAOil Temperature MeterDisplay) was a concern, so I chewed Nylon washer.
View detail