Reviews
If it's an off-road vehicle, I'd like to have it.
DF200 DJEBEL does not have an Under Guard, even though it is an off-road motorcycle.
When driving on rough roads, Crankcase and Frame are covered with quite a bit of mud, and I think Small stones are also bouncing up and down.
On one occasion, a large branch was stuck in the crevice between the Crankcase and the Frame.
So, I took the plunge and bought it.
As it is an Exclusive Design product of the car model, we did not have to worry about the installation, and it was installed EXACTLY.
Front Fender and Side cover are White Material.:Because it is Plastic, it fits in as if it had been there from the beginning.
The DF200 DJEBEL/125 is small enough to cover only the lower part of the crankcase and the under frame, and the drain bolt is notched in a round shape.
Scraping out the mud that gets between the Crankcase and the Crankcase is also a simple matter of keeping it attached.
The price is a bit high.
However, I am grateful that they still continue to sell Parts for the DF200 DJEBEL, and if I think of it as the price Gold, it makes sense.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X (Motard), YAMAHA WR250R, YAMAHA WR250X (Motard)
Carbon Wind
Mounting Bolt and Washer were Plating so
Mounted with Stainless Steel. The holes are perfectly positioned and there is no gap.
The color was closer to Silver than the product photo.
The size is just right and I am satisfied with Large.
View detail
Fits: HONDA XR250R, HONDA XLR250R BAJA, HONDA XLR250R BAJA
Good
I tried the Gold product, but the chatter sound was too loud and I had to remove it when replacing the oil. Also, it seems to have good protection. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
That was a good purchase
This is one of the best Guard around the Engine. It's well made, easy to install and fixed in 4 places.
It is safe. I really like it because it's more round than lumpy.
View detail
Fits: YAMAHA SEROW250, YAMAHA XT250X, YAMAHA TRICKER
For light woodland fun, the Material:I think Plastic is good.
Material not seen too much in SEROW250 only.:This is a Plastic Skid plate.
Material:I haven't used the Aluminum one so I can't say it's a hudrill, but I think it's lightweight by comparison.
Material:I personally like the fact that there is no vibration noise due to the Plastic.
If you play TRIAL-style in the mountains and hit your belly a lot with the Stir, you'll have some durability issues.
If you're looking for a flat forest road + α way to play, Material:I personally recommend Plastic because it is lighter and more slippery.
There is a service hole in the drain bolt.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It does not matter if it does not need to be there
On the way of Touring, I was running FlatDirt on the forest road, so I tried it on for a while. I only fix with Screw 4, but because the Screw hole was misaligned, I spread the lower Screw hole slightly vertically. Since it is processing under assumption, there is no problem. There is certainly an echo of the Engine, but I wonder if it is enough.
Material is not ba LePera, it is made quite solidly by plastic
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Satisfied!
I used a mileage of 30,000 kilograms for 3 years since installing.
Forest Road Touring 1% Discount, OffRoad course 30% driving, 60% commuting helps us to break without being split. Occasionally there are runs such as galleies.
Because WR has car weight, it was exactly right as we were looking for a lightweight item as possible.
I was able to install it without problems without mounting without problems. Oil It is necessary to remove it when replacing.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
I did not buy it with Webike
WR 250 R should be more solid if it is better
As expected, if WR 250 X, Small from stones and dirt
Because it is about Guard, I thought that this was enough and bought it.
The rest is light and rarely Aluminum or iron is fast
I heard rumors that resonance sound comes out, I quit.
You need to make it look good enough.
It's Very Good..
View detail
For late term in CRM first term
CRM250R (Rm, Type 2) We installed AR for. I really bought it without thinking much about Fitting.
Since the product is thicker and firmer than the OEM, it is rare to shake with vibration even if you install Number, Stop-lamp, Blinker. The surface has a glossy feeling, I will feel like using it without painting or Decal.
For the installation, cut off the interfering part, force it to Sub FrameRear using Bracket, and fix the Sub Frame Front normally.
Because it is forcibly, the shape does not match the rear end of the Seat, the gap with the Side cover is large and there is no sense of connection.
However, when it comes to getting used to it, it is good because it is cool in the distance.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Recently I got a WR250R. I used to ride 2 stroke off road motorcycles which have chambers that play the role guards but cases on 4 stroke motorcycles are exposed so I purchased this guard. I couldn't make up my mind whether to chose aluminum or pl
Recently I got a WR250R.
I used to ride 2 stroke off road motorcycles which have chambers that play the role guards but cases on 4 stroke motorcycles are exposed so I purchased this guard.
I couldn't make up my mind whether to chose aluminum or plastic but considering that it is a product of a top brand and the plastic hasn't broke before, and that you can chose from an extensive range, I decided to purchase it.
You only need about 2 minutes to mount it.
I tried it out on the trail. You can hear the sound of things hitting but there's no problem at all.
Actually I think it's better than aluminum.
I used aluminum for a race once and it got so punched I couldn't restore it to original state
It was so deformed I couldn't remove it.
It's difficult to restore aluminum but with plastic it'll restore itself so there's nothing to worry.
If you're planning to purchase a guard, I advise you to get a plastic one.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
I mounted it to my WR250R to protect the engine and frame from damage. Its curved structure not only protects the bottom but also the sides as well and fits beautifully to the vehicle.The plastic is 3mm thick. It might not protect the body from hu
I mounted it to my WR250R to protect the engine and frame from damage.
Its curved structure not only protects the bottom but also the sides as well and fits beautifully to the vehicle.
The plastic is 3mm thick. It might not protect the body from huge rocks or at screes, but on river beds and forest roads it does a great job!
It has light weight and doesn't give out any vibrations sound, and the cost is quite reasonable.
I heard stones hitting the guard but it didn't cause any problem at all.
When replacing oil, you'll have to remove the guard but its only mounted on with 4 screws, so it won't take trouble.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Although the past Off vehicle had attached the Aluminum, since a hard run is not carried out like [ former ], this is enough.It thinks at least by Wound prevention of Engine lower part.Since it is , here which seems to be light is chosen as m
Although the past Off vehicle had attached the Aluminum, since a hard run is not carried out like [ former ], this is enough.It thinks at least by Wound prevention of
Engine lower part.Since it is
, here which seems to be light is chosen as much as possible.It is also a favorite that it is the Black.As [ be / in case of a car besides / some whose screw hole does not suit ]
It was OK here.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Although intensity had slight uneasiness for the Plastic raw material, and it ran the dry riverbed after attachment, etc., it was OK even if the stone hit. It is light and he has no saying.
Although intensity had slight uneasiness for the Plastic raw material, and it ran the dry riverbed after
attachment, etc., it was OK even if the stone hit.
It is light and he has no saying.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Since he heard that it is durable by the product made from a Plastic among the Under Guards for wr, it purchases.Since the increase of weight and an engine echo sound are reported, aluminum ware besides is dismissed.Since the accuracy of the prod
Since he heard that it is durable by the product made from a Plastic among the Under Guards for wr, it purchases.Since the increase of weight and an engine echo sound are reported, aluminum ware besides
is dismissed.Since the accuracy of the
products and the range covered satisfactorily are wide, it is pleasing.
I think that the product is probably purchased next time also even if it damages.
View detail
Fits: SUZUKI 250SB, KAWASAKI KLX250ES, KAWASAKI KLX250 SR, KAWASAKI KLX250 R, KAWASAKI D-TRACKER, SUZUKI 250SB, KAWASAKI KLX250ES, KAWASAKI KLX250 SR, KAWASAKI KLX250 R, KAWASAKI D-TRACKER
[Buying motive] It follows on the BEET oil cooler KIT introduction to -KLX250 (07), Former. the skid plate with feather (product made from aluminum) which was being used -- this product CYCLE-AM:skid plate type II product number:63029 corresponden
[Buying motive] It follows on the BEET oil cooler KIT introduction to -KLX250 (07),
Former.
the skid plate with feather (product made from aluminum) which was being used -- this product CYCLE-AM:skid plate type II product number:63029 correspondence -- the motocross must-have item which slides on it and overcomes a vehicle type:KAWASAKI/KLX250ES merchandise information goods detailed color:Black obstacle.
the engine lower part is guarded from a rock or an obstruction, and the dent of a frame and breakage of a crankcase are prevented. -- it exchanged.
[the feature of goods], etc. - attachment -- the case of KLX250 (07) -- processings, such as a screw hole and a drain hole location, -- it was unnecessary, and bolt-on was possible and it was easy.
- With a photograph, although it is incomprehensible, it is DRC skid plate form product number:D58-17-012 between a frame and this product. 30 cm x general-purpose size:15-cm were put in, and the mud jam is prevented.
[Grading of goods] Since - reinforcement is [ needlessness / moderateness, cheapness, a light weight, / processing ] also perfect, it is a five stars.
View detail
It was very GOOD about which of form, weight, and flexibility. Since other strange form like a product is not carried out, and the back of a hand is hard to be injured in case of emergency, I think that it is good. It was perfect when a thing like
It was very GOOD about which of form, weight, and flexibility.
Since other strange form like a product is not carried out, and the back of a hand is hard to be injured in case of emergency, I think that it is good.
It was perfect when a thing like a rubber color of the vibration isolation attached to the place of grip end was attached if it may be allowed to wish so much.
View detail