Reviews
Since M5.
I bought it because my homemade Fender Eliminator cracked when it was brittle.
I chose this one because Screw was M5.
It is a very normal reflector with no particular problems.
View detail
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
They used to sell them at Home center.
[How is it used?
I was lucky enough to buy a used SEROW225 WE Tank, but it did not have a Fuel Cock, so I bought Yamaha OEM Parts from Webike, but I forgot to order the Hose clip....
When I went to install the Fuel Cock, I realized that it would take too long to order it again, so I went to a local home center, but no matter how much I looked, I couldn't find the product I was looking for. Hose Band (screwed in) is not what I'm looking for." but...
In the end, I gave up and bought it from Webike.
Did you receive the item as per the Image?
The original OEM Clip for Yamaha SEROW225 is a simple needle gold type part, but if I am going to buy another brand product's Clip, I wanted a well-made type, so I looked for it in Webike's product introduction column and bought this product.
The product was as per the standard Image.
How did you like it?
It is a small but reliable and secure product that fixes Firmly and Hose at the Joint.
The firmly attached part is tough to install with bare hands except for those who have a strong grip.
[Points to note]
A slight difference in size can be managed by brute force, but too large or too small can be problematic, so do not be in a hurry to measure the outside diameter of the hose before ordering the required number of pieces.
How did it compare to other products?
There are many similarly designed hose clips available from other companies, but all of the Manufacturer's products serve their purpose well! (As for Clip, I've never had anyone grab a shoddy product before.) 。
Other items that would be helpful
Point and hang of installation
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
I'm embarrassed to say that after plugging Hose in the past "Oh, I didn't put Clip in." What a mess.
[ITEMS TO BUY TOGETHER
Depending on the time and circumstances, fuel hoses also deteriorate over time, so if your old fuel hose is worn out, you should replace it with a new hose. (If the fuel hose is hardened and has a crack in it, you never know when a trouble may occur.) 。
[Opinions and requests to Manufacturer
When searching Webike for products of similar design but with different product names for each manufacturer, it is difficult to find the product you are looking for. Search name I was lost in
View detail
fat eyes
I bought this LED because the same one was out of order.
Quantity:2pc. One of the Set is the out-of-quantity:1 Set of 2pcs. so I had no choice but to use Quantity:1 Set of 2pcs.
Lynn Parts LEDs last 2 yearsQuantity:2pc. One of the Sets is still Large sturdy, but we have now added a Quantity:2pc. Quantity of Set:Since I purchased the Set, I put on the newly purchased LED Light.
This product is sturdy and durable, both high and low Large without flicker.
View detail
Simple and Stylish
It is simple as a bracket and the reflector is thin, so I am satisfied with the reflected look.
It is not cheaply made and is solid.
View detail
I installed it on my Grom. This is cosmetic.
I used it on a JC75 Grom.
I had been wearing Mirror by Mukawa, but I wanted to try Bar end mirror, so I was shopping around and this product caught my eye.
I bet the build quality is shoddy at this price...
I was surprised when I saw what I received.
Aluminum's Cut-outs were very well done.:Pair (for Left and Right) The price is surprisingly low for a
Grom's STD Handlebar has an M6 screw hole inside, so we used only the screw with the supplied Bar End Rose.
There was no Clearance with the Grip at all, so I used a Washer that I happened to have and Offset it about 4mm outward.
Mirror itself is quite small, but can it be used for practical purposes? It is like "Limit". Visual confirmation is necessary when changing lanes.
Thanks to the Handlebar, there is no vibration at all, which I was worried about.
The color of the mirror was also Blue in the Defferential Gearo, but a Plain mirror for replacement is also included, which is a perfect addition.
It is a little uncomfortable until you get used to it, but there is a Bar end mirror.
View detail
Looks good Parenthesis.
I put it on Up.
I can see more than I thought I could, but it's small, so I have to check visually.
I think there is quite a bit of flexibility in adjustment.
The M8Screw weight bar was left over, so it was installed using an M8→M6 InsertNut.
I think it is very Refreshing and Parenthesis like STREETFIGHTER!
View detail
Cospar good
Cost-effective!
Lever stripped with File and went with Silver!
Lever a little longer?
View detail
Exhaust System installation
It was a great help. I look forward to working with you again when the opportunity arises! View detail
ZOOMER Separate shop
I haven't installed it yet, but it looks very solid and luxurious. View detail
It has a luxurious feel to it
I was looking for a Mirror that would look good on MOTARD.
Certain Manufactures used by foreign countries are not affordable because of their outrageous prices, but this Mirror is not cheap for the price.
There is little rattling and no shaking while driving.
I did not use the supplied bar end parts, but prepared and installed a separate Clamp on the Handlebar.22φIt seems that the Handlebar can be used without the Clamp.
View detail
it's the best
It was a good decision to switch from a Swallow handle to a Continental handle.
Best
View detail
ZOOMING
I purchased it and it was the right decision.
I had a lot of trouble with the length, but it was JUST right.
I look forward to working with you again.
View detail
License Plate Light
I bought this product because I needed a License Plate Light for a small custom job, and I think it is easy to install, but I think it is easy to break if you bump it a little bit. View detail
Ruckus luggage rack
The bike luggage rack was just as specified. Good quality materials and fitted perfectly. The ordering process was straight forward and the delivery time was quick and reliable. I would definitely recommend using webike and will be ordering from them again in the future. View detail
It works like crazy.
I used it on my JOG APRIO with AXIS 90 front transplanted. I highly recommend it. View detail
Mini LED Front Blinker from Rin Parts
* About quality and texture, The blinker housing base is made from a white plastic and the blinker lens is made from a lightly tinted plastic. * About the feeling of use, Great look with the use of these mini LED blinkers, the front end of the Grom is much more sleek without the need of bulky front turn signals. * Products to buy together, Being a LED blinker the Honda OEM flasher relay will not be able to operate these at the correct flash rate so you also need to purchase a LED resistor kit to add in-line to correct the flash rate. * Difficulty of installation, Installation requires headlight removal and then the headlight side shrouds to be removed to access the electrical connector and mounting hardware. With the LED blinker not having a Honda OEM style electrcial connector you will need to change either side so this issue is resolved. The process was completed in 60 minutes with a little difficultly. * Cost performance and comparison with other products, Cheapest pricing you will find for mini LED front blinkers that looks great and do the job but if your budget is not limited and you want the best then checkout the product from TST. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you are going to be using LED blinkers at the front and rear then a LED flasher relay will be a better option then having in-line resistors at both ends to correct the flash. Use the product reviews to assist in making a decision on your purchase. View detail
For ZOOMER use only
I switched from DAYTONA's Swallow handle.
Positionally it was good.
View detail
Bar End Mirrors from Rin Parts
* About quality and texture, Durable black painted finish over the aluminium housing and mounting brackets. * About the feeling of use, Extremely happy with the low profile look of the front area and I can now see clearly what is behind me. * Products to buy together, To tidy up the front area further a nice set of machined aluminium brake and clutch levers. * Difficulty of installation, The installation with aftermarket handle bars is just insert into the end of the bar and tighten down the allen key bolt, then remove the Honda OEM ones and plug the mounting holes. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, No cheaper bar end mirrors of this style and great quality for the price. Webike do offer much fancier designs and machined aluminium finishes if your budget allows. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you still have the Honda OEM handle bars installed then you will not be able to just insert into the end of the bar and tighten down the allen key bolt, modification of the setup will be required. Use the product reviews to assist in making a decision on your purchase. View detail
Mounted on CYGNUS-X
Since it interferes with the step of the R.P.M. Front fork, a Stainless Steel Nut in Titaniumium color was purchased separately and installed on the Axle Shaft of JSM with a double nut.
Shaft hole 14mm was just right.
Although the installation is focused on appearance, it is a nice addition to the Parenthesis.
Sold one at a time, so two are required for Both Sides installation.
View detail