Reviews
Fits: KTM 390DUKE(DUKE), KTM 250DUKE(DUKE), KTM 200DUKE(DUKE), KTM 125DUKE(DUKE), KTM RC390, KTM RC250, KTM RC125, KTM RC200
Best fit short lever for KTM 250duke
The NORMAL lever was difficult to use, so I replaced it with a new one. I considered the Retractable Lever as an option, but I decided to go with the Short Lever because it has no moving parts and is stronger than the Retractable Lever, which would break either way if I chipped it. When I actually put it on, it is quite short. But I think it is just right for KTM 250duke which has a light control system. Finger Quantity:Even with 2pcs, it can be lightly half-clutched, so it is a lever that is fun to ride. Installation requires some care, such as removing the clutch switch and replacing it with a KTM 250duke. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI SV650 ABS, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI BANDIT1250, SUZUKI BANDIT1250F, SUZUKI GSX-R1000, SUZUKI GLADIUS650650, SUZUKI GSR400, SUZUKI GSR250
It's just for decoration anyway (laughs).
Was the one you received as per Image? Yes
Was the installation difficult? The OEMfootpeg ball was made Smooth without being sticky or missing with Grease!
How was your experience with it? There will be no one riding in the back. I don't think there will be a turnout.
[Included Parts:were they on? No
As a request to Manufacturer, I would be glad if a new Split Pin is attached, because unexpectedly the Split Pin gets scratched when removing OEM (I am probably a messy person).
View detail
Quality is on par with OEM
What made you decide to buy?
This year is Speed La's year, and I was surprised by the quality of Speed La's products, which I found out by purchasing Speed La's Dry carbon products, and I am really captivated by Speed La's products. (Lol) Following the Rear Fender and the Exhaust Cover, I also bought the Chain Guard, which I had been interested in for a long time, because it was on sale at the end of the year. (Since Speedra's Dry carbon is made by Handmade, it seems that once the stock runs out, it will take a long time for the next delivery. Owners who are thinking of purchasing it are advised to purchase it while it is still in stock).
How was your experience with it?
The material is dry carbon, which is also used in aircraft, making it stronger and lighter than the OEM Chain Guard. Dry carbon is completely different from conventional wet carbon, and is produced using the latest carbon processing technology, boasting ultra-light weight and ultra-strength. It is used in Sue Parka, F1, MotoGP, etc. (It's also used for high Motorcycle)
All Speedra products purchased this year. Twill weave/glossy is. All Instruction Manuals include All of our dry carbon products are handmade and finished. Slight variations and errors may occur." However, all the parts we purchased this year were as good as OEM and we could feel the craftsmanship of the craftsmen. All of Speedra's dry carbon products, both matte and glossy, are UV-cut, so they can withstand UV rays, which is a weak point of carbon, and can be used without worry.
Installation
In order to replace the chain guard, the footpeg was removed because there is a bolt on the reverse side of the footpeg. Also, there is a clip on the reverse side of the swing arm, so don't forget it! I think it takes about 10 minutes. I thought it would be easier to replace the Fender with the Bolt removed, so I left it off. Incidentally, the removed bolt is coated with Screw lock. It is troublesome but I removed the old Screw lock agent by Dice and applied a small amount of new Screw lock agent to complete the work.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
legendary ssk
It's a neat fitting. Remove the genuine product and put it on top. Use the genuine product for the plastic rivet in the middle The left and right sides can be assembled using the enclosed spacer. It's longer than the original product, so I think it covers foreign substances a little bit more. I'm satisfied. View detail
S1000RR Essentials
I am a Carbon fetishist by nature, and I have been using Fender, Cowl, and other parts as a whole material.:I was only interested in replacing the carbon frame with a cover, and thought that a cover was a bad idea. I was interested only in replacing the Carbon and thought that the Cover was a bad idea. I bought it because I knew it was good for heat protection. The effect was so drastic that even a thin jersey was no problem at all. Even half pants are durable.
I am not comfortable with the cover, but it looks much better, and along with the Carbon parts above and below, it gives me a glaringly glaring feeling that I personally feel three times as much at once, and I am Large satisfied. Everyone should put such a thing on.
As for the quality, the Others, some of them are HPParts, but as for the Under Cowl in the picture, it cost about 300,000. But the surface quality is no different. This is the first time I bought a Chinese product (which is not on HP), but this was the first time for me to buy a Chinese product, and now I have no problem with Chinese products, and I now choose Chinese products.
View detail
The quality that doesn't disappoint your expectations
The delivery also arrived in a short time. I've used a lot of carbon products while tuning my bike. Of course, Chinese products are cheap, The quality of ssk can never be matched. The rear fender and radiator side covers also fit perfectly and have a high finish. The difficulty of installing the product is very simple without explaining it. Remove the cover of the existing aluminum. Then, you can install a new carbon cover separately from left to right. My motorcycle has become as luxurious as it gets. View detail
Speedra Frame cap
I bought the frame cap because it gives a more custom look than without. I like the color. View detail
Fits: HONDA CB400F, HONDA CBR400R, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CBR400R, HONDA CBR650F, HONDA CBR650R, HONDA CB300R, HONDA CB500F, HONDA CBR500R, HONDA CB300R, HONDA CB500F, HONDA CBR500R
CROSS CUB (JA45) The handlebar for the "M" can also be attached to the handlebar for the "M".
Honda's M6 compatible Bar End is Flat and Half-moon type (2 types) There is a
In the official website of SPEEDRA, the half-moon type is divided into Type 1 and Type 2, so you can judge by looking at the shape of the Bar End portion.
The compatibility of the handlebar of the CROSS CUB is not listed on the official website, but it can be fitted with a Type 1 handlebar in terms of shape.
So much for the preamble…
We chose this Bar End because of its Balance of Design and Weight, and the width of the car. (See below.) The decision was made in terms of
About the width of the car…
To complicate things a bit, I am a Grom Owner, but I have the Grom as a loading Spec.
The vehicle is equipped with a SIDEPannier Bracket and loaded with side boxes.
From the point of view of traffic laws, Side box is the width of a car. (Handlebar width) The load must not exceed
Naturally, the Grom OEMHandlebar cannot provide the width.
(10 cm or more shorter than the width from both ends of the Side box in actual size)
So we used CROSS CUB's Handlebar and this Bar End for length.
We compared the SPEEDRA with the heavy weight type of other companies, and among them, the one made by SPEEDRA was slightly longer in length. However, the weight of SPEEDRA is 6~70g lighter than the same type of other companies in the catalogue, so it is easy to balance the weight of handling in a…SmallEngine Displacement Volume vehicle.
This is a special process, but I hope it will be helpful to someone.
View detail
Speedra Frame cap
It's just a Cap, but the color is bright and it gives a custom look. I just don't know about the durability yet? View detail
Fits: KAWASAKI ZZR1200, KAWASAKI ZX-9R, KAWASAKI ZX-10R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z800, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI Versys1000, KAWASAKI Versys, KAWASAKI ER-6N, KAWASAKI ER-6F, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI NINJA H2 SX SE
Match Rear Sets
I decided to use SNIPER Gold for the Rear Sets, so I chose Gold to match. I will probably never use it, but it has a very high class feel to it, and I am very glad that I installed it. View detail
Fits: HONDA NC750X, HONDA REBEL500, HONDA INTEGRA750, HONDA NC750S, HONDA INTEGRA700, HONDA NC700X, HONDA NC700S, HONDA CB650F, HONDA CBR650F, HONDA CB650R, HONDA CBR650R, HONDA CB1100, HONDA VFR800X, HONDA VFR800F, HONDA RVF400, HONDA CB400SB, HONDA CB400SF, HONDA CBR400R, HONDA CB400Four, HONDA NSR250R
Speed La Tandem Footpeg
Non-slip and well-designed. Each color is available, so it is easy to match with the color of Motorcycle. View detail
good
I like the luxury and precision of the product. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
There is a sense of quality
It is not cheap and has a high quality feel, so it is a perfect part for a dress-up. If you think it is just a lid, you are wrong. If the accuracy is not solid, the lid will come off while driving and you will have a large problem. View detail
Fits: KAWASAKI NINJA650, KAWASAKI VERSYS 650, KAWASAKI VULCAN/S 650cc, KAWASAKI VERSYS 1000, KAWASAKI Z650, KAWASAKI ZX-25R, KAWASAKI Z900
Impressed with Speed La's After response.
I had no problems with the installation after referring to other people's videos. The quality of the product was good. I was actually sent the wrong product, and when I informed the Manufacturer of this, they immediately responded. This was a positive experience. I still remember the resentment I felt when I was sent a defective TV from Soho. (Lol) View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
expectation
The Daytona FuelPad I've been using on another car for about a year got water in it, but it's expensive and I'm hoping to see how the Speedra one does. I hope it doesn't get water in it. View detail
Texture is not bad.
Chose to change the color of Cowl to match the Body, but it is expensive…… View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R600
Preliminary Lever
[How is it used?
Spare parts for when you stumble on Circuit
Was the one you received as per Image?
Image Street
Was the installation difficult?
not difficult
View detail
◎◎ as Attachment
Since the master cylinder cap is also Titanium, we purchased Titanium for this product as well.
It is a good color that shows various expressions depending on the angle of view and reflection of light.
Exactly and addicted to OEMCap.
Remove and fit the Screw on the OEMCap and put back the removed Screw.
The installation is completed by tightening the screw with the smallest Hexagonal Wrench.
Photos of the installation on Motorcycle will be uploaded later.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Custom feeling is up!
It looks and feels better than the OEM plastic cover and I am very happy with it.
The custom feeling is also up.
However, the holes did not fit, so a larger hole was needed, for example, by hanging a file. That is Carbon parts.
On the Right Side, it is easier to align the holes if the tank is removed.
In case you are wondering, OEM PlasticQuickRivet is not used (No holes either) It is
View detail
Satisfied with appearance, pleased with performance
I had it installed at Motorcycle shop at the same time I took delivery of my car. According to 'Accuracy is very high for a product of this type.' The Center is properly centered on the Tire and there is no bias in Clearance.
We have heard that the inner fender is a long type like for Race or this product, which is quite a large type of parts and makes a strong assertive impression, so we decided to use the inner fender with the matte feeling like the Tire or Swing Arm surface. Unglazed Type This was the Large correct answer.:The understated luster on Carbon Style gives it an elegant custom look.
(”Light reflection” has a strong influence on people's perception, so you can change a strong impression even with small parts by using a matte finish when you want to weaken the impression and a glossy finish when you want to strengthen it).
There was no need to say anything about mud protection, since this is the Cover range, and there was not even any sand roll up.
View detail