Reviews
If you are looking for cheapness, this is it.
Product Name
BATTLE FACTORY Battle factory Balance weight
Item Number
BA00-033
Vehicles
MT-09 ABS (8BL-RN69J) 2021
Number of man-hours
5 minutes (when attaching Tire replacement)
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect (when changing tires)
Why did you choose this product?
Because it was necessary for balance adjustment at the time of Tire replacement.
Was the one you received as per Image?
It was as per Image. It was more frugal than I expected.
Was the installation difficult?
It is not particularly difficult, since all you have to do is stick it on. Cutting may be difficult with ordinary scissors.
How was your experience with it?
It is difficult for the layman to know if Balance has been taken. It is a matter of feeling.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
I would have been happy with Black color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
For Maintenance
Light weight, good appearance
It's a good product
I was not sure about JTrip, but I am glad I chose this product.
View detail
I bought it for Race
[How is it used?
I used it to put on Tire warmer at Circuit.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is very easy to install and remove, so it is very useful in Circuit!
[Points to note]
Can be installed on any commercial vehicle body.
View detail
Fits: HONDA NSR250R, HONDA CBR600F, HONDA CBR400RR, HONDA NSR250R, HONDA VTR1000FVTR1000F FIRESTORM, HONDA NSR250R
Stable Battle
It is used for NSR250R and VTR250.
Both of them are Main by Circuit Us, but I prepared them as spares because they have good welding accuracy and look cool.
View detail
It's consumable.
Footpeg will almost certainly be damaged if it falls over on Circuit
Mounting ScrewM8 P1.25 is the most universal, so it is just right to have as a Repair
Quantity:1 Set of 2pcs. 3000 yen would be great for me personally.
View detail
Relatively inexpensive
If you roll in Circuit, Footpeg is almost always bought in one fell swoop.
Less than 2000 yen per unit is, well, helpful.
View detail
During car wash and wheel maintenance
It is designed for mini bikes, but the stem hole diameter is suitable, so I used it on the MT-10. Naturally, the Rear is supported by the maintenance stand. It takes a lot of force to raise it, but it works. However, it is not suitable for maintenance that requires a lot of force because it tends to wobble. In that case, it is definitely more stable to use a normal front stand.
Also, if the foot hangs at an angle halfway, the STAND of the Rear may gap.
View detail
Racer's standard
The bar of the Rear Sets I bought was too long and caught too much, so I bought it because the operability was not good. 。 It is good to be able to purchase at any time. View detail
Bar only
I use the M10P1.5 selection for two cars I own. If one of them is damaged, I can use it again. Also, in the event of a fall, it will be completely gone or taken to the Plate. "Make it hard to become one." As with the Levers, a hole is drilled around the 1/3 tip of the bar so that it breaks off first. View detail
Small Stand Hook.
I installed this Stand Hook on my SC59 CBR1000RR, and I have noticed that if the Stand Hook is long enough, the whole Swing Arm weld often flies off when the bike falls over. This Stand Hook is very small and I think it will minimize the damage when it falls over. I slip down once after installing the Stand Hook and the Stand Hook was not damaged. I also use the Rear Stand made by the same company, but the Stand Hook is not so small that it is difficult to lift up, and I think it is very easy to use. View detail
Stainless Steel Change shiftArm
Various Sizes (length) The stainless steel material is also strong enough.
It can be used for Universal's Ball jointM6 and I use it for CUB's Rear Sets.
View detail
Boots is quite a bit of a bite.
Bites on Boots.
Of the several footpegs I have, this is the one that bites the best.
View detail
Very lightweight
This is a very lightweight STAND. Originally, we were using a STAND made by another company, but it was heavy and a little inconvenient when carrying it or loading it on the transporter. The Battle factory STAND we purchased this time is very lightweight and can be carried easily with one hand. The feel of the STAND is not a particular problem, but it is a little less rigid than the steel ones made by other companies, but I thought that was a trade-off with the lightness.:I like it because it is Stainless Steel and looks very Parenthesis. The bosses are set up differently for each car model, so you should be aware of that when purchasing. I highly recommend this product and I am very satisfied with it. View detail
Fits: HONDA CBR1000RR
I bought it for Circuit Running
I installed it on a 2011 CBR1000RR.
Originally, a short MFJ-approved Type? was installed, but it was shaved off due to a fall, so it was replaced with a longer Type. The installation is done by tightening the bolt to the engine hanger bolts on both sides. When installing, it is necessary to use a hole saw or similar tool to drill a hole in the OEMSide cowl. The hole position was drilled according to the positioning paper included in the package, and the rest of the drilling was done by matching the actual bolt to the position of the hole. As for the effectiveness, I think the short type of the Hole saw was very effective when I fell down in SlipDown before, so I think it will be useful enough. When using on public roads, it is possible that the Damage may go to the Frame side if the Slider is caught on a curb or the like when it falls over. When installing, it is a little difficult to position the hole drilled in the cowl, so if you are not confident, it is better to ask a motorcycle shop to do it for you.
View detail
Fits: HONDA CBR1000RR, HONDA NSR250R, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000, Others
BATTLE FACTORY Bat LuremQuantity:Set
I use it because it is non-slip and holds well. Boots hang well on the tip, so it is easier to hold. View detail
Battle factoryChange arm
There are two mounting holes for LINK and a good selection of ShiftStroke.
The finish is very beautiful.
View detail
Fits: HONDA NSR Mini, HONDA NSR50, HONDA NSR50, HONDA NSF100, HONDA NSF100
Good quality
A little expensive but good quality. View detail
Easy, easy to lift
It is a little heavy, but can be lifted easily.
It can be folded so it takes up little space in the Transporter.
The stability is there, too.
View detail
Tire replacement!
I bought the Whole Balancer because it is a necessity.
It was easy to apply with double-sided tape.
I have so much, so little...
View detail
Circuit driving essentials
I installed this secondary cover on my 2011 CBR1000RR, which is a must-have for circuit driving. I don't know how well it protects the Engine Cover since I haven't crashed yet after installing it, but I have an impression that it will withstand only one or two slip downs. The installation is also BoltQuantity:It is very easy to install and remove the side cowl, and only 2pcs are needed to fasten. It is a little bit expensive, but considering its functionality, we think this is a part that you should definitely install. View detail