Reviews
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
Can be used without problems 。 No complaints.
I do DIY Oil replacement, but I had not used this Size stuff for over 10 years and lost it, so I repurchased it.
The texture and fitting are both fine.
It's a hassle to align each Size and Size:Some people buy Free's, but I personally prefer to use the dedicated products for each Size because I feel safer.
View detail
Expensive! But if you don't buy this tool, you can't replace the Exhaust System!
[How is it used?
This tool is essential for removing the O2 Sensor of the Exhaust System.
I purchased this product when I exchanged it for YOSHIMURA's One piece.
Was the one you received as per Image?
Tools only, nothing else attached.
How was your experience with it?
Although I was concerned about whether Torque would really be applied, I was able to remove the Sensor without incident.
[Points to note]
CB1100's O2 Sensor is just too hard!
I was finally able to remove it while blowing CRC.
It may be tough with low-precision tools.
How did it compare to other products?
Quantity:There are inexpensive tools available as Set items, but I think this one is sufficient since it is only used for CB with only 17mmSocket.
The other tool is also available from Snap on, but is more expensive at over 10,000 yen, so we would like to have this one before it sells out.
View detail
Having trouble finding a use for it?
[How is it used?
I have been wanting to get a Gold Brush for a long time, as the tooth brushes are too yucky and useless for removing persistent dirt, rust, etc. I have been looking for a Gold Brush for a long time.
I bought it as a trial because it was inexpensive for KTC.
Was the one you received as per Image?
I thought it would be about one size larger than Tooth Brush, but it was much larger than I imagined.
The wooden handle is a cheap-looking material with a reasonable price tag and does not seem to be very durable.
How was your experience with it?
I bought Gold Brush for the first time, and the brushed part is softer than I imagined, and it seems to be scratch-resistant, but it cannot scrape off dirt as hard as I would like.
However, since it is a Gold Brush, I am not sure to what extent it will not scratch the surface.
[Points to note]
For a tool novice like me, it would be good to buy tools with the feeling that they are useful once in a while if you have them.
Do not expect too much (laughs).
In addition, since different materials have different uses, it is important to find out in advance what you want to use the material for and what it is suited for.
View detail
I feel this is enough for Sunday mechanic
[How is it used?
I purchased this product to remove and install the snap ring for the rear master cylinder O/H of my YAMAHA/XJR400R. I chose KITACO because they are relatively inexpensive among various manufacturers.
Was the one you received as per Image?
It was exactly as shown in the Image. It is larger than I expected, so it has some presence in the tool box.
It may be surprisingly troublesome to store the Head section.
How was your experience with it?
I had no problems using it. The only thing I have to say is that the tip seems to be quite fragile, so if you handle it poorly, you may end up chasing it. Also, the Instruction Manual is on the back of the container, so it is hard to dispose of it...
[Points to note]
The tip is a delicate part and can be easily broken if handled roughly, so care should be taken.
How did it compare to other products?
Are the cheap ones still from the same supplier? I looked around and found the same thing.
But even if you buy the expensive ones, they are Sunday mechanic, so they are used less often.
Therefore, we think it is a good idea to use these cheap products with crushing vigor.
View detail
Socket
Combined with the Small Type Ratchet, it is very useful for compact use in tight spaces.
Single Item sales, affordable prices are helpful.
View detail
Ideal for Plug replacement
This is my first Plug replacement, so I bought this one. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
Essentials for Filter Replacement
I use this product when replacing filters on my CB1300SF and NC750X, and sometimes it is difficult to remove the filter and wrench, but with this product it can be quickly removed by closing it with a bolt that fits on the top. If it is troublesome, you can also use a Press Chick Hammer. However, please note that oil will fly out. View detail
Ordinary Socket
Motorcycle Stand Lift I purchased this for the purpose of lifting Jack.
Lift up the BOLT Shoulder Bag, but it is a one-person Motorcycle straddle and cause the Jack under the belly Quantity.:Set.
At this time, the BOLT Shoulder Bag has a very good footing and a low center of gravity, so the Motorcycle is less likely to become unstable even when bending forward.
When I operated the jack for the first time after purchasing it, I used my MONKEY Wrench, but I thought a manual ratchet wrench would be more convenient for operating the jack, so I decided to use this product, which has a standard that fits the ratchet.
Since the main application is Jack elevation, I think the durability is infinitely etc.
I have operated with Impact wrench, but it is difficult to operate Throw alone, so I think Hand tool is better without danger.
View detail
I just wish I'd known about it sooner.
I bought it because it looked easy to use and most importantly, it looked cool after watching the video of the Suzuka 8 Hours Endurance Race.
As expected of KTC, the movement is smooth and will be active from now on.
I appreciate that such a useful item can be purchased at this price.
View detail
Excellent Ratchet
This Ratchet has a high quality luxurious feel. I have used twice since recieveing more than a week ago and find myself reaching for it between projects just to appreciate the feeling of it in my hand. This tool is very useful in tight spaces working on the back of the engine block between the block and firewall, or underneath the windshield cowl. The swivel provides a favorable angle, and the ratchet offers low backdrag and lots of leverage. I am on the east coast of the USA and DHL delivered this package in only 36 hours. Webike is an excellent vendor. View detail
Superior Quality
I have been searching for high quality tools made outside of America, as the American market is filled with cheaply made inferior tools. I discovered KTC and Nepros recently on that journey. I also found that purchasing directly from Webike has been the easiest way to obtain legitimate tools from Japan. This ratchet has provided me personal success on several of my recent endevours. I will be purchasing more KTC and Nepros tools in the near future. DHL delivered this order to the east coast of the USA in about 36 hours! View detail
Very Strong Offset Wrenches
I have used these wrenches several times in the past few weeks. They are lighter than I expected, but very strong and comfortable in the hand. I have been very pleased with these tools and will continue to buy more tools from KTC through Webike. DHL delivered this order to the east coast of the USA in about 36 hours! View detail
If you want to build a Tire with Tube, this is the one.
It is useful to pull out the Tube type Air Valve with ah-ha.
However, the Type Puller, which uses leverage, is better for use with Air Valve for Tubeless.
View detail
![Hexlobe Screwdriver T-Type [T25 X 100]](https://img.webike-cdn.net/catalogue/13962/4962485020484_1_TS.jpg)
Driver shape for easy turning
Because of the shape of the driver, Torque cannot be applied, but it can be quickly removed by holding the shaft and turning it.
I had the opportunity to use it at work and found it very easy to use and purchased it as a tool for Motorcycle maintenance.
View detail
Color makes it easy to identify Size.
Purchased for electric for Driver.
The sizes are separated by color, so there is no need for stress to find the size in a flash.
We use Vessel products most often because of their high accuracy and low price.
View detail
![L-type Hexlobe Wrench With Hole (1 Set Of 8pcs.) [T-6, 8, 10, 15, 20, 25, 27, 30]](https://img.webike-cdn.net/catalogue/13962/4962485310325_1_TS.jpg)
Quantity:Save with the set!
It has a complete range of Sizes and is convenient to keep in your tool box.
The only complaint is that the smallest size is only held in place by a sponge, so it comes off easily.
View detail
Great Valve Core Remover
This is a very well made core remover. The finishing is excellent and having a steel core tip means it wont wear or deform like Aluminium tipped items will. It also makes it more positive to use. The small hole in the handle allows for the use of additional leverage if the valve is very stiff or tight. DRC makes some very nice products and this is one worth buying... View detail
In addition to removing the interior lining
I bought it to remove the interior lining of my car, but I thought it could also be used to remove and install the Fuel Hose, so I tried it and it was very easy to remove.
The width is 10mm, so only the tip can be inserted, but the Fuel Hose is also new, and it is easier to take out the Large because I used to have a hard time taking it out.
Of course, it can be used to remove the interior lining without any problem.
I am satisfied with the low price.
View detail
PRO Tool.
This is a nifty tool from Pro shop Technics in Suspension, if you don't want to put a Wound on the Top cap. View detail
angle
It is useful because the angle can be changed for use in tight spaces.
It is reasonably priced, compact, and takes up little space for storage.
View detail