- Home
- Product reviews
- Tools
- Hand tools
- Pliers
- Other Pliers
- I feel this is enough for Sunday mechanic... (KITACO: Snap Ring Fliers)
【KITACO】Snap Ring Fliers Review
I feel this is enough for Sunday mechanic
[How is it used?
I purchased this product to remove and install the snap ring for the rear master cylinder O/H of my YAMAHA/XJR400R. I chose KITACO because they are relatively inexpensive among various manufacturers.
Was the one you received as per Image?
It was exactly as shown in the Image. It is larger than I expected, so it has some presence in the tool box.
It may be surprisingly troublesome to store the Head section.
How was your experience with it?
I had no problems using it. The only thing I have to say is that the tip seems to be quite fragile, so if you handle it poorly, you may end up chasing it. Also, the Instruction Manual is on the back of the container, so it is hard to dispose of it...
[Points to note]
The tip is a delicate part and can be easily broken if handled roughly, so care should be taken.
How did it compare to other products?
Are the cheap ones still from the same supplier? I looked around and found the same thing.
But even if you buy the expensive ones, they are Sunday mechanic, so they are used less often.
Therefore, we think it is a good idea to use these cheap products with crushing vigor.
ฉันรู้สึกว่าเพียงพอแล้วสำหรับช่างวันอาทิตย์
[มันใช้ยังไง?
ฉันซื้อผลิตภัณฑ์นี้เพื่อถอดและติดตั้งแหวนล็อกสำหรับ O/H แม่ปั๊มหลังของ YAMAHA/XJR400R ของฉัน ฉันเลือก KITACO เนื่องจากมีราคาไม่แพงนักในบรรดาผู้ผลิตหลายราย
เป็นสิ่งที่คุณได้รับตามภาพหรือไม่?
มันตรงตามที่แสดงในภาพ มันใหญ่กว่าที่ฉันคาดไว้ ดังนั้นจึงมีอยู่ในกล่องเครื่องมือบ้าง
การเก็บส่วนหัวอาจยุ่งยากอย่างน่าประหลาดใจ
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
ฉันไม่มีปัญหาในการใช้มัน สิ่งเดียวที่ฉันต้องพูดคือทิปดูเหมือนจะค่อนข้างเปราะบาง ดังนั้นหากคุณใช้มันไม่ดี คุณอาจจะไล่ตามมันได้ อีกทั้งคู่มือการใช้งานยังอยู่ที่ด้านหลังของภาชนะ ดังนั้นจึงยากต่อการกำจัด...
[ประเด็นที่ควรทราบ]
ส่วนปลายเป็นส่วนที่ละเอียดอ่อนและอาจหักได้ง่ายหากใช้งานอย่างหยาบๆ ดังนั้นจึงควรระมัดระวัง
เปรียบเทียบกับผลิตภัณฑ์อื่น ๆ ได้อย่างไร?
สินค้าราคาถูกยังมาจากซัพพลายเออร์รายเดียวกันหรือไม่? ฉันมองไปรอบ ๆ และพบสิ่งเดียวกัน
แต่แม้ว่าคุณจะซื้อของราคาแพง แต่เป็นช่างวันอาทิตย์ดังนั้นจึงใช้ไม่บ่อยนัก
ดังนั้นเราจึงคิดว่าเป็นความคิดที่ดีที่จะใช้ผลิตภัณฑ์ราคาถูกเหล่านี้อย่างแรง
Responses
Other reviews
Poor.
I bought it because I thought it was cheap and good that the tip could be replaced.
The downside of the tip replacement is that it often hits too many areas and cannot reach tight spots.
The C-ring is so hard that the tip is useless because it is wobbly.
At any rate, I can't RECOMMENDATION because there are so many irritating POINTS.
We managed to finish the work, but it was a Level we never wanted to use again.
Tools are Large stamps.
View detail
cheap
It works fine
It's not much of a turnout, but it can be used for 3Pattern and the price is very reasonable.
Too easy.
I tried to get them in Knipec Fat.
I decided to go with this one because it's more expensive.
I'm satisfied
Recommended items
View detail